Sections All products
Use checkboxes for multiple choice, click a name to enter one section only.
Updating results...
Form Factors All form-factors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
Vendor All vendors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
TPSi2100 TPSi2100 100W Isolated Power Supply Tri-M's TPSi2100 is an isolated PC/104-Plus power solution, designed for embedded applications requiring isolation and clean power in rugged environments. With wide-range input voltages, transient suppression, galvanic isolation, and pluggable terminal mating plugs, this rugged design is ideal for any industrial application. For applications requiring a clean isolated power, the TPSi2100 is the perfect solution. This high density, small form factor, and unprecedented SWaP (size, weight, and performance) board is the perfect design for military, aerospace, transportation, and industrial applications. Advantages High efficiency Extended temperature operation Rugged design High voltage isolation 2250V input/output isolation 6000W transient suppression Active input voltage clamping Reverse polarity protection Clean and filtered power for the PC/104 bus Power/OS TPSi1085 TPSi1085 85W Isolated Embedded Power Supply Tri-M's TPSi1085 is an isolated PC/104-Plus embedded power supply offering 2250V input/output isolation, 6000W transient protection, active input voltage clamping, wide input ranges of +9V to +33V DC, and maximum efficiency 88%. This rugged design operates in an extended temperature range from -40°C to +85°C (-40°F to +185°F), and features quick-disconnect terminal socket plugs for simple installation. Galvanically isolated and short circuit protected, the TPSi1085 offers two standard outputs of +3.3V @ 8A and +5V @17A with total combined power of 85W. This isolated power solution also provides remote shutdown functionality, power failure signaling and three dual colour LED status indicators. For PC/104-Plus connectivity, there are also 8bit, 16bit, and PCI headers with passthrough/non-passthrough bus versions available. For applications requiring a clean isolated power, the TPSi1085 is the perfect solution. This high density, small form factor, and unprecedented SWaP (size, weight, and performance) board is the perfect design for military, aerospace, transportation, and industrial applications. Advantages High efficiency Extended temperature operation Rugged design High voltage isolation Transient supression Clean and filtered power for the PC/104 bus Power/OS
TPSi1075 TPSi1075 Isolated 75W DC/DC Power Converter Tri-M's TPSi1075 is an isolated PC/104-Plus power solution, designed for embedded applications requiring isolation and clean power in rugged environments. With wide-range input voltages, transient suppression, galvanic isolation, and quick-disconnect terminal mating plugs, this rugged design is ideal for any industrial application. Designed for harsh environments, including military standards, shock, vibration and extended temperature, the TPSi1075 is well suited for transportation, defence, and aerospace industries. For reliable protection and high performance, the TPSi1075 is the perfect solution for isolated DC power. HPSC104-SER HPSC104-SER 160 Watt UPS High Power PC/104 Vehicle Power Supply with Smart Charging The HPSC104-SER is a DC-DC converter that includes a flash based microcontroller and 4 amp charger for advanced power management and smart battery charging. Combined with a Tri-M standard battery pack or super cap module, the HPSC104-SER can be used as an Uninterruptible Power Source (UPS) for a PC/104 system. The HPSC104-SER is designed for low noise embedded computer systems, has a wide input range of 6 to 40 V DC and is ideal for battery or unregulated input applications. The HPSC104-SER provides up to four stages of battery charging and can charge SLA, NiCd, and NiMh batteries and level two and three SMBus compatible batteries. Charge currents are up to 4A, and battery charging voltages from 10V to 35V DC. The HPSC104-SER has advanced power management functions that allows timed on/off control of the unit, notification of changes to main power and changes in the battery status. For example, the HPSC104-SER can be programmed to power off the main outputs in 60 seconds and then turn them on again 12 hours later. In addition to smart charging and power management the HPSC104-SER can monitor up to 16 different temperatures using digital I²C digital temp sensors. The HPSC104-SER is available as RoHS, is PC/104 compliant and rugged enough for to meet the demands on military and mining vehicle power supplies, including -40°C to +85°C extended temperature rating.
HE104-75W HE104-75W 75 Watt High Efficiency PC104 Power Supply For applications requiring a DC-DC PC104 power converter that supplies up to 75W of power, Tri-M offers the HE104-75W. It is ideal for use on 12VDC and 24VDC mobile applications where power from a DC source (input) needs to be converted (output) to match the applications power requirements - generally an embedded computer. Efficiency of the HE is over 90% - the higher efficiency means less heat is generated - and it is designed to operate in extended temperature applications where temperatures can be between -40°C and +85°C. Input voltage spikes that go beyond the input voltage window (9VDC to 40VDC) are managed through transient suppressors that restrict the input voltage, while maintaining normal output power operation. The HE104-75W is designed to minimize any generated noise or interference, allowing it to be used for airborne or ground vehicles that encounter EMI or RFI. HPS3512 HPS3512 203 Watt Max PC104 PSU with HPS-UPS Firmware The HPS3512 is a high power, high performance PC104 PSU that supplies +3.3V, +5V, and +12V outputs. The HPS3512 also includes a flash based microcontroller that supplies advanced power management, and an RS232 serial port. The HPS3512 is designed for low noise embedded computer systems, has a wide input range of 6-40V(>6:1) and is ideal for battery or unregulated input applications. The HPS3512 is specifically designed for vehicular applications and has heavy-duty transient suppressors (up to 18000W) that clamp the input voltage to safe levels, while maintaining normal power supply operation. The HPS3512 is a state-of-the-art Mosfet based design that provides outstanding line and load regulation with efficiencies up to 90 percent. Organic Semiconductor Capacitors (OSC-CON) and Polymerized Organic Semiconductor capacitors (POSCAP) provide filtering that reduces ripple noises below 20mV. The low noise design makes the HPS3512 ideal for use aboard aircraft or military applications or wherever EMI or RFI must be minimized. Constant frequency architecture controllers provide excellent line and load transient response on the +5VDC and +12VDC outputs. The HPS3512 has advanced power supply management functions that allows timed on/off control of the HPS3512, notification of changes to main power and secondary power status. For example, the HPS3512 can be programmed to power off the outputs in 60 seconds, and then turn on again 12 hours later. The HPS3512 size is 3.55 x 3.775 inches, which is the same size as the PC/104 standard, and has the same mounting holes pattern as the PC/104 standard. However, the HPS3512 does not include the PC/104 bus connectors. All generated voltages are provided to a removable header. A removable plug allows the HPS3512 to be easily installed. The RS232 serial port is provided on a 2x5 row pin header. The HPS3512 can be configured to meet almost any power supply and battery powered need for embedded applications, whether that is a simple +5V application, or providing power for backlighted LCD panels.
HE104-DX HE104-DX 60 Watt output +5V, +12V, -5V and -12V The HE104-DX is a 60 Watt PC/104 DC-DC rugged power supply. The HE104-DX is specifically designed for the rugged requirements of vehicular applications and has heavy-duty transient suppressors (3000W) on both main and secondary inputs) that clamp the input voltage to safe levels, while maintaining normal power supply operation. The HE104-DX is a state-of-the-art Mosfet based design that provides outstanding line and load regulation with efficiencies up to 95 percent. Organic Semiconductor Capacitors provide filtering that reduces ripple noises below 20mV. The low noise design makes the HE104-DX ideal for use aboard aircraft or military applications or wherever EMI or RFI must be minimized. The HE104-DX has a wide input range of 6 - 40V DC (>6:1). The +5V, +12V, -5V and -12V DC outputs are controlled by a constant frequency architecture regulator that provides excellent line and load transient response. The HE104-DX is also available in a low cost, +5V and +12V output only configuration, the HE104-DXL. The HE104-DX is a compact design measuring 3.55" x 3.775" x 0.9" and has an operating temperature of -40° to +85°C. The HE104-DX is available from stock and is now RoHS compliant. HE104+DX HE104+DX 108 Watt High Efficiency PC104+ Embedded Power Supply The HE104+DX is designed for low noise embedded computer systems, has a wide input range of 6-40V (>6:1) and is ideal for battery or unregulated input applications. The HE104+DX is specifically designed for vehicular applications and has heavy-duty transient suppressors (9000W on both main and secondary inputs) that clamp the input voltage to safe levels, while maintaining normal power supply operation. The HE104+DX is an embedded power supply with state-of-the-art Mosfet based design that provides outstanding line and load regulation with efficiencies up to 90 percent. Organic Semiconductor Capacitors provide filtering that reduces ripple noises below 20mV. The low noise design makes the HE104+DX ideal for use aboard aircraft or military applications or wherever EMI or RFI must be minimized. The +5VDC and +12VDC outputs are controlled by a constant frequency architecture regulator that provides excellent line and load transient response. The HE104+DX has an optocoupled on/off input (SD) to control the outputs of the HE104+DX. To enable the HE104+DX outputs, a 6 to 40V signal must be connected to the SD input. If remote control is not required, the SD input can be connected to the main power input. The common for the remote 6 to 40V signal must be connected to the HE104+DX common. If the SD input is connected directly to the main input power connector, the common for the SD input is already done. The HE104+DX is now RoHS compliant.
HE104-DXL HE104-DXL High Efficiency 60 Watt PC/104 Power Supply The HE104-DXL is a 60 Watt PC/104 DC-DC rugged power supply. The HE104-DXL is specifically designed for the rugged requirements of vehicular applications and has heavy-duty transient suppressors (3000W) on both main and secondary inputs) that clamp the input voltage to safe levels, while maintaining normal power supply operation. The HE104-DXL is a state-of-the-art Mosfet based design that provides outstanding line and load regulation with efficiencies up to 95 percent. Organic Semiconductor Capacitors provide filtering that reduces ripple noises below 20mV. The low noise design makes the HE104-DX ideal for use aboard aircraft or military applications or wherever EMI or RFI must be minimized. The HE104-DXL has a wide input range of 6 - 40V DC (>6:1). The +5V, +12V DC outputs are controlled by a constant frequency architecture regulator that provides excellent line and load transient response.  The HE104-DXL is a compact design measuring 3.55" x 3.775" x 0.9" and has an operating temperature of -40° to +85°C. The HE104-DXL is available from stock and is now RoHS compliant. HESC104 HESC104 60 Watt High Efficiency PC104 Power Supply with Smart Charging The HESC104 is a 60W DC-DC PC104 Power Supply that includes a flash based microcontroller and 4 amp charger for advanced power management and smart battery charging. Combined with a Tri-M standard battery pack or super cap module, the HESC104 can be used as an Uninterruptible Power Source (UPS) for a PC104 system. The HESC104 is designed for low noise embedded computer systems, has a wide input range of 6-40V (>6:1) and is ideal for battery or unregulated input applications. The HESC104 is specifically designed for the rugged demands of vehicular applications and has heavy-duty transient suppressors (5000W) that clamp the input voltage to safe levels, while maintaining normal power supply operation. The +/-5V DC and +/-12V DC outputs are controlled by a constant off-time current-mode architecture regulator that provides excellent line and load transient response. The HESC104 provides up to four stages of battery charging and can charge SLA, NiCd, and NiMh batteries and level two and three SMBus compatible batteries. Charge currents are up to 4A, and battery charging voltages from 9.5 to 19.5V. The HESC104 has advanced power management functions that allows timed on/off control of the HESC104, notification of changes to main power and changes in the battery status. For example, the HESC104 can be programmed to power off the main outputs in 60 seconds and then turn them on again 12 hours later. In addition to smart charging and power supply management the HESC104 can monitor up to 16 different temperatures using digital I²C digital temp sensors. The HESC104 is available as RoHS, is PC/104 compliant and -40°C to +85°C is standard.
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
CAPTCHA
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters