Astro
Carrier for NVIDIA Jetson TX1
Vendor:Connect Tech
- Details
- Specification
- Order information
- 2 Gigabit (10/100/1000) Ports
- USB and HDMI Ports
- Multiple Video Input Channels
- Extended Temperature Range -40°C to +85°C (Astro Carrier)
Astro is specifically designed to work with the NVIDIA Jetson TX1 supercomputer-on-module. The Astro Carrier provides access to features found on the Jetson TX1 module in an extremely small footprint (87mm x 57mm/3.43" x 2.24"). It makes use of a high density, board-to-board connector that allows for use with Connect Tech’s off the shelf or custom designed break out boards.
| Technical specifications | |
| Compatibility | NVIDIA Jetson TX1 |
| Dimensions | 87mm x 57mm (3.43" x 2.24") |
| Mini PCIe Expansion |
1x half size card or 1x full length card PCIe and USB signaling (Mini PCIe) |
| Storage | 1x mSATA, half size card |
| USB |
1x USB 3 port 2x USB 2 ports |
| Network |
2x Gigabit (10/100/1000) Ports: 1 from the Jetson TX1 Module 1 from on-board Intel 82574 PHY/Controller |
| GPIO | 4-bit GPIO |
| Display | 1x HDMI interface |
| Audio |
HD Audio 1x stereo output |
| Serial | 2x RS-232/422/485 hardware selectable ports |
| Video Input |
1x MIPI CSI-2 (on breakout board layer) 8x Coax with GMSL Signaling Inputs (on carrier board layer) |
| Misc. External Interfaces |
I2C System Control (PWR and RST buttons, etc.) RTC battery input |
| Connectors |
90-pin QSH Samtec connector to be mated to Connect Tech Inc. breakout boards 8x U.FL connectors for video input streams using GMSL signaling |
| Weight |
ASG001 (Astro Carrier): 46 grams (with stand-offs attached) XBG201 (Breakout Board): 51 grams Jetson TX1: 144 grams (with heatsink); 75 grams (without heatsink) |
|
Environmental and physical specifications |
|
|---|---|
| Operating Temperature | -40°C to 85°C (The Jetson TX1 Module is rated for -25°C to +80°C (measured at thermal heat plate)) |
| Model | Description |
| ASG001 | Connect Tech Inc. Astro Carrier for NVIDIA® Jetson™ TX1 |
| ASG012 | Astro for Jetson TX2/TX1 with GMSL populated |
| XBG201 | Astro Breakout Board for NVIDIA® Jetson™ TX1 |
| XBG206 | Astro Breakout Board for NVIDIA Jetson TX2i |
| CKG041 | Starter Cable Kit for Astro Breakout Board XBG201 |
| CBG225 | U.FL to SMA (for ASG012) |
| MSG062 | AC/DC Wall Mount Power Supply for Astro Products |
| MSG070 | AC/DC Wall Mount (Europe) Power Supply for Astro products |
