nanoX-TC

COM Express® Mini Size Type 10 Module with Intel® Atom™ Processor
  • Details
  • Specification
  • Order information
  • Intel® Atom™ Processor E6xx from 600 MHz up to 1.6 GHz
  • Up to 2 GB soldered DDR2 SDRAM at 800 MHz
  • 4x PCI Express x1 lanes
  • Operating Temperature 0°C to +60°C

No bigger in size than a business card, the nanoX-TC is a COM Express™ Mini form factor Type 10 pinout compatible computer-on-module that targets battery powered, mobile and handheld system designs. The new Mini size form factor with a footprint of just 55 mm x 84 mm is the smallest size in ADLINK's COM Express product lineup, next to the Basic size (125 mm x 95 mm) and Compact size (95x95) form factors.

The nanoX-TC is based on the Intel® Atom™ Processor E6xx with less than 3.9 W thermal design power (TDP). These new 45nm Intel architecture processors implement ground-breaking power management techniques, making them ideal for thermally constrained and fanless embedded applications. The Processor E6xx series offers an integrated 2D/3D graphics engine with hardware encode/ decode, LVDS and SDVO output, HD Audio, PCI Express, and support for Intel® Hyper-Threading and Intel® Virtualization Technology.

The Intel® EG20T Platform Controller Hub (PCH) provides additional I/O flexibility with SATA, UART, Gigabit Ethernet and USB host/client support.

The nanoX-TC allows for innovative designs in mobile and "light" computing, including portable and mobile equipment for the automotive and test and measurement industries, visual communication and in the medical field. Using the Intel® Atom™ Processor E6xx and Intel® EG20T PCH chipset, the nanoX-TC allows developers to utilize a wide variety of mainstream software applications and middleware familiar to end users that will run unmodified with full functionality on this platform.

  • Show more
Technical specifications

Core System

CPU Intel® Atom™ E680, 1.6 GHz, 3.9 W TDP
Intel® Atom™ E660, 1.3 GHz, 3.3W TDP
Intel® Atom™ E640, 1.0 GHz, 3.3W TDP
Intel® Atom™ E620, 600 MHz, 2.7W TDP

All processors support Intel® Hyper-Threading and Intel® Virtualization Technology
L2 cache 512 KB on all processors
Memory Soldered 512 MB, 1 or 2 GB DDR2 at 800 MHz
BIOS License-free bootloader or AMI UEFI flash
Hardware Monitor Supply voltages and CPU temperature
Debug Headers XDP SFF-26 extension for ICE debug
Embedded Features Instant on with Intel Bootloader support, OEM BIOS settings, Board Info & Statistics, ACPI 3.0, Smart Battery Management support, Watchdog with programmable timer ranges
Expansion Busses 4 PCI Express x1 (0/1/2/3, port 3 is optionally used for EG20T PCH; no PCIe x4 support)
LPC Bus, SMBus (system) , I2C (user)
4 GPI and 4 GPO (shared with SDIO on optional EG20T)
SPI (supports BIOS only)

Video

2D/3D Graphic Engine Integrated in Intel® Atom™ Processor E6xx
Decoding MPEG2, MPEG4, VC1, WMV9, H.264 and DivX
Encoding MPEG4, H.264 (baseline at L3)
LVDS Interface Single channel 18- or 24-bit pixel color depths with maximum resolution of up to 1280x768 @ 60 Hz. Pixel clock rate between 19.75 MHz (minimum) and 80 MHz (maximum).
SDVO Serial digital video output supporting devices for DVI, TV-out, analog VGA. Maximum resolution of up to 1280x1024 @ 85 Hz and pixel clock rate up to 160 MHz.

Audio

High Definition Audio Integrated in Intel® Atom™ Processor E6xx
Characteristics Multi-channel audio stream, 32-bit sample depth, sample rate up to 192 kHz
Audio Codec On carrier (standard support for ALC886)

Ethernet

Serial and CAN One RS-232 (RX/TX) and one CAN (AX/RX) port (optional 2x RS-232 w/o CAN)
GbE MAC Integrated in Intel® EG20T PCH
PHY Realtek RTL8211CL
Speed 10/100/1000 Mbps

I/O Interfaces

Chipset Integrated in Intel® PCH EG20T
USB Six USB 2.0 host ports and one USB 2.0 client port
SATA Two ports supporting SATA 1.5 Gb/s and 3 Gb/s
SDIO Port SDIO/MMC supporting SDHC speed class 6 (shared with GPIO, selectable in the BIOS setup)

Power

Input Power 4.75 V – 21 V wide range, supports AT mode and ATX mode (with additional 5 Vsb)
Power States Supports S0, S1, S3, S4, S5
Power Consumption 5W at 5V typical, 3W idle
Smart Battery Support Yes

Other

Specification PICMG COM.0: Rev 2.1 Type 10
Form Factor Mini size: 84 mm x 55 mm
Compatibility PICMG COM Express® COM.0 R2.0 Type 10
Operating Systems Standard Support: Windows XP/Windows 7, Linux
Extended Support (BSP): Embedded XP, WinCE 6.0, Linux/Moblin, VxWorks 6.x, QNX, AIDI Library

Environmental and physical specifications

Operating Temperature Standard: 0°C to +60°C
Storage Temperature -20°C to +80°C
Humidity 90% at +60°C
Shock 15G peak-to-peak, 11ms duration, non-operation
Vibration Non-operating: 1.88 Grms, 5-500 Hz, each axis
Operating: 0.5 Grms, 5-500 Hz, each axis
Certification CE, FCC, HALT
  • Show more
Model Description
nanoX-TC-E680-1G COM Express® Mini Size Type 10 Module with Intel® Atom™ E680 at 1.6GHz, PCH EG20T and 1 GB soldered DDR2 SDRAM
nanoX-TC-E660-1G COM Express® Mini Size Type 10 Module with Intel® Atom™ E660 at 1.3GHz, PCH EG20T, and 1 GB soldered DDR2 SDRAM
nanoX-TC-E640-1G COM Express® Mini Size Type 10 Module with Intel® Atom™ E640 at 1.0GHz, PCH EG20T, and 1 GB soldered DDR2 SDRAM
nanoX-TC-E620-1G COM Express® Mini Size Type 10 Module with Intel® Atom™ E620 at 600 MHz, PCH EG20T, and 1 GB soldered DDR2 SDRAM
nanoX-TC-E680-2G COM Express® Mini Size Type 10 Module with Intel® Atom™ E680 at 1.6GHz, PCH EG20T and 2 GB soldered DDR2 SDRAM
nanoX-TC-E660-2G COM Express® Mini Size Type 10 Module with Intel® Atom™ E660 at 1.3GHz, PCH EG20T, and 2 GB soldered DDR2 SDRAM
nanoX-TC-E640-2G COM Express® Mini Size Type 10 Module with Intel® Atom™ E640 at 1.0GHz, PCH EG20T, and 2 GB soldered DDR2 SDRAM
nanoX-TC-E620-2G COM Express® Mini Size Type 10 Module with Intel® Atom™ E620 at 600 MHz, PCH EG20T, and 2 GB soldered DDR2 SDRAM
Accessory
HTS-nXTC-B Heatspreader for nanoX-TC with threaded standoffs for bottom mounting
HTS-nXTC-BT Heatspreader for nanoX-TC with throughole standoffs for top mounting
THS-nXTC-B Multidirectional Heatsink for nanoX-TC with threaded standoffs for bottom mounting
THS-nXTC-BT Multidirectional Heatsink for nanoX-TC with threaded standoffs for top mounting
nanoX Starter Kit COM Express Type 10 Starter Kit for nanoX-TC


  • Show more
Login / Registration
укажите почту
введите пароль
Forgot password?
CAPTCHA
Loading data...
Subscribe to newsletter
specify your contacts