MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Leaf Light HS v2 J1939-13 Type II
J1939 compliant CAN-USB interface
The Leaf Light HS v2 J1939-13 Type II provides a simple way of connecting a PC with the on-board computer of any J1939 compliant vehicle or industrial system. Get diagnostic data by means of its USB 2.0 connector and a 9-pin J1939-13 (Type II) compliant CAN connector, which is colour-coded in green and supports either 250 Kbps or 500 Kbps vehicle networks.
The Leaf Light HS v2 J1939-13 Type II belongs to Kvaser’s Leaf Light product range, which has made its name as the work-horse of the CAN interface world by offering a reliable, low cost means of connecting any CAN network to a PC or mobile computer.
Major Features
Standard type «A» USB connector and a J1939-13 Type II compliant CAN connector.
Capable of sending up to 8000 messages per second, each time-stamped with 100 microsecond accuracy.
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
Galvanic isolation, enhancing protection from power surges or electrical shocks.
Support for SocketCAN, see elinux.org for details.
Software
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads.
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces.
Includes full documentation and many program samples, written in C, C++, C#, Delphi, Java, Python and Visual Basic.
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available.
RP1210A Application Programming Interface available.On-line documentation in Windows HTML-Help and Adobe Acrobat format.
Leaf Light HS v2 M12
CAN-USB interface for marine electronic systems
The Leaf Light HS v2 M12 is the marine version of Kvaser’s popular Leaf Light v2 interface. This device provides a simple way of connecting a PC with the on-board computer of a marine electronics system by means of its standard USB 2.0 connector and a 5-pin National Marine Electronics Association (NMEA) approved CAN connector. The Leaf Light HS v2 M12 is ideal for diagnosing NMEA 2000 bus issues, configuring and flashing NMEA 2000 bus nodes, monitoring NMEA 2000 bus traffic and load conditions and stimulating or emulating NMEA 2000 nodes.
Major Features
Standard type «A» USB connector and an NMEA-approved male CAN connector
Capable of sending up to 8000 messages per second, each time-stamped with 100 microsecond accuracy
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s
Galvanic isolation, enhancing protection from power surges or electrical shocks
Support for SocketCAN, see elinux.org for details
Software
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Java, Python and Visual Basic
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available
RP1210A Application Programming Interface available
On-line documentation in Windows HTML-Help and Adobe Acrobat format
Leaf Light R v2
IP65-rated CAN to USB interface
The Kvaser Leaf Light R v2 is the rugged version of Kvaser’s popular Leaf Light v2 interface. This is a single channel CAN bus interface with a lightweight yet highly durable, IP65-rated housing that assures reliable protection against water and dust ingress. Vibration, shock and drop proof, this interface belongs to Kvaser’s Rugged range and operates over a temperature range of −40 to +70°C.
With a standard USB2.0 connection and a high-speed CAN channel in a 9-pin D-SUB CAN connector, the Kvaser Leaf Light R v2 handles transmission and reception of standard and extended CAN messages, with a time stamp precision of 100 microseconds. Features include error frame detection and LED indicators for power and CAN channel status.
Major Features:
USB CAN interface. IP65 rated lightweight aluminum housing, sealed with polyurethane coating
Capable of sending up to 8000 messages per second, time-stamped with 100 microsecond accuracy
Quick and easy plug-and-play installation
Supports High Speed CAN (ISO 11898-2) up to 1Mbit/s
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
Power is taken from the USB bus
Detection of error frames
LED lights alert user to device status
100% compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib
Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet
Operating temperature range from −40 to 70°C
Software
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Java, Python and Visual Basic
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available
RP1210A Application Programming Interface available
On-line documentation in Windows HTML-Help and Adobe Acrobat format
Memorator 2xHS v2
CAN-USB interface
The Kvaser Memorator 2xHS v2 is a compact, dual channel CAN bus interface and standalone datalogger that allows users to monitor and collect data from two high speed CAN channels simultaneously. Standalone mode logs data to an SD card; interface mode provides a real-time connection between the CAN network and a PC, via USB.
As a data logger, Memorator makes for a perfect flight recorder due to its compact design. Triggers and filters can be set on this device by means of a user-friendly configuration program and stored on the standard SD card (supplied).
The Kvaser Memorator 2xHS v2 is an intermediate level device. For an easy-to-use single channel data logger with no preconfiguration required, visit the Kvaser Memorator Light HS (00513-6). For advanced trigger and filter options and the ability to run user-developed scripts, plus on-device buffering, opt for the Kvaser Memorator Pro 2xHS v2 (00819-9).
Major Features:
Monitor two CAN channels simultaneously using just one device.
Quick and easy plug-and-play installation.
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
CAN messages are time-stamped with 100 microseconds resolution.
Supports silent mode for analysis tools — listens to the bus without interfering.
Fully compatible with applications written for other Kvaser CAN hardware using Kvaser CANlib.
One SD slot that accepts SD flash disks, currently up to 64 GB.
Two high-speed CAN connections (compliant with ISO 11898-2), up to 1 Mbit/s.
Connects to a PC with a standard USB 2.0 connection.
Power from CAN bus or from the USB side.
Built-in real time (calendar) clock with battery backup.
Logger status is indicated by externally visible LEDs.
Plastic housing with dimension WLH about 55×150×23 mm (circa 2×6 x 1 inch).
Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.
Galvanic isolation.
Support for SocketCAN, see elinux.org for details.
Software
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads.
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Java, Python and Visual Basic.
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface is available.
RP1210A Application Programming Interface is available.
Documentation in Windows HTML-Help and Adobe Acrobat format.
Air Bridge Light HS
A preconfigured pair of units that acts as a wireless CAN bridge
Kvaser Air Bridge Light HS is a configuration-free wireless CAN bridge that achieves predictable latency, without sacrificing stability or range. Comprising a preconfigured pair of plug-and-play units to rapidly exchange raw CAN data, the Kvaser Air Bridge Light HS is designed for environments or situations that make wired connection unsuitable or challenging e.g. between two moving parts that are connected by CAN.
There are two versions: Kvaser Air Bridge Light HS (00808-3) is approved for the European Union, while Kvaser Air Bridge Light HS (FCC) (01008-6) complies with US certification. Both share the same functionality but have different radio transmission schemes due to regulatory differences.
Major Features
A preconfigured pair of units that acts as a wireless CAN bridge
Plug and Play, Driver Free and Configuration Free
Automatic Baudrate Detection (125K, 250K, 500K, 1M)
Point to Point Radio Link
2.4 GHz Proprietary Protocol
Internal Antenna Design, Antenna Output Power max 18 dBm approx
High-Speed CAN Connection (compliant with ISO 11898-2), up to 1 Mbit/s
Supports both 11-bit (CAN2.0A) and 29- bit (CAN 2.0B active) identifiers
Power Supplied through the CAN Bus Interface
Rugged Aluminum Housing
Note: Error Frames and Arbitration information are not transmitted by the Air Bridge units across the wireless link
Certifications
The Kvaser Air Bridge Light HS (EAN: 73-30130-00808-3) has been tested and declared to be in conformity with the relevant Union harmonisation legislation Radio Equipment Directive (RED) 2014/53/EU (Art. 3.1a, 3.1b, and 3.2) and RoHS recast Directive 2011/65/EU (Art. 4.1). See User Guide for full EU Declaration of Conformity.
The Kvaser Air Bridge Light HS (FCC) (EAN: 73-30130-01008-6) has been tested and found to comply with part 15 of FCC Rules. See User Guide for full FCC Compliance Information Statement.
Leaf Light v2
CAN to USB interface
The Kvaser Leaf Light v2 represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network. With its USB 2.0 compliant connector and 9-pin D-SUB connector, the Leaf Light HS v2’s sleek, ergonomically designed housing is both robust enough for everyday use and small and flexible enough to be used in space-constrained applications. Now with galvanic isolation as standard.
Kvaser’s Leaf Light series is the workhorse of the CAN world. The Kvaser Leaf Light V2 supports high speed USB for CAN and offers high performance at low cost. Loss free transmission and reception of standard and extended CAN messages on the CAN bus is transmitted with a time stamp precision of 100 microseconds.
Major Features
The Kvaser Leaf Light V2 is a high speed USB interface for CAN that offers loss free transmission and reception of standard and extended CAN messages on the CAN bus.
8000 messages per second, each time-stamped with 100 microsecond accuracy
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
Galvanic isolation, previously a more expensive option on Kvaser’s original Leaf Light, now comes as standard on the Leaf Light v2, enhancing protection from power surges or electrical shocks.
Low current consumption (70 mA) reduces power drain from your laptop.
Local buffering and preprocessing results in high performance and a reduction of time critical tasks for the PC.
Software
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads.
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic.
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available.
RP1210A Application Programming Interface available.
On-line documentation in Windows HTML-Help and Adobe Acrobat format.
Memorator Pro 5xHS
High-performance CAN bus interface and standalone datalogger
Kvaser Memorator Pro 5xHS is a five channel, high performance, CAN (controller area network) bus interface and standalone datalogger that allows users to monitor and collect data from up to five CAN channels using just one device. Standalone mode logs data to an SD card; interface mode connects to the PC via USB. This device supports CAN FD.
Configurable using Kvaser’s Memorator Config Tool, Memorator Professional 5xHS is also capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is supplied.
Ethercan HS
Powerful, real-time Ethernet to CAN interface
The Kvaser Ethercan HS is a powerful, real-time Ethernet to CAN interface that, when linked over the Internet to an Ethernet-equipped PC, allows CAN data to be remotely accessed from anywhere in the world. Built-in Power over Ethernet (PoE) eliminates the need for a separate power cable when you can’t power the device from the CAN bus.
Kvaser’s Ethercan product range makes it easy to implement the Internet of Things (IoT) concept by enabling data from any CAN product or system to be sent over a corporate network or WAN, using the standard Kvaser CANlib API. Users of the Kvaser Ethercan HS can also choose to connect to the device using the built-in REST API for web-enabled devices, such as smartphones.
As a programmable interface, the Kvaser Ethercan HS is suited to advanced applications, such as ECU reflashing. For example, a t program could be created to process CAN messages locally in the device, removing the latency of WiFi and/or Ethernet.
DIN Rail S030-X11 Relay add-on
Optional relay add-on module to the Kvaser DIN Rail SE400S-X10
Kvaser DIN Rail S030-X11 Relay is an optional add-on module to the Kvaser DIN Rail SE400S-X10 base module* with 8 N.O. (Normally Open) relays and 8 digital inputs that can be used separately. This IP20-rated module is thermal, reverse-polarity protected and surge power supply protected. A power LED displays the state of the module, whilst there are separate LEDs for each of the digital inputs.
*Please note: Add-on modules require a Kvaser DIN Rail SE400S-X10 to be able to work.
DIN Rail S020-X10 Analog add-on
Optional analog add-on module to the Kvaser DIN Rail SE400S-X10
Kvaser DIN Rail S020-X10 Analog is an optional add-on module to the Kvaser DIN Rail SE400S-X10 base module*. With 4 analog inputs and 4 outputs, this IP20-rated module is thermal, reverse-polarity protected and surge power supply protected. The input voltage range is fixed (between 0 and 10V), and resolution is 12 bits. A power LED displays the state of the module.
*Please note: Add-on modules require a Kvaser DIN Rail SE400S-X10 to be able to work.
