Back to results...

Express-DN7

COM Express Basic Size Type 7 Module with Intel Atom C3000 SoC
  • Details
  • Specification
  • Order information
  • Intel Atom Processor C3000 SoC (up to 16 cores)
  • Up to 48GB ECC (and non-ECC) DDR4 memory at max. 2400MHz
  • Up to 2x PCIe x8 Gen3, up to 4x 10GBASE-KR ports
  • Extreme Rugged Operating Temperature: -40°C to +85°C (build option)

The Express-DN7 is a COM Express COM.0 R3.0 Basic Size Type 7 module supporting the 64-bit Intel Atom C3000 processor (formerly «Denverton-NS») system-on-chip (SoC). 16 CPU cores with 31W TDP and integrated 10G Ethernet make the Express-DN7 especially suited for customers who need excellent computing performance with low power consumption, such as edge computing applications, in a long product life solution.

The Express-DN7 features Intel Quick Assist Technology (cryptographic and compression acceleration), Intel Virtualization Technology (including VT-x, VT-d), Intel AES-NI Technology, and DDR4 ECC (or non-ECC) dualchannel memory at 1866/2133/2400 MHz (dependent on SoC SKU) to provide excellent overall performance. In addition, the Express-DN7 has up to three SODIMM sockets supporting up to 48GB of DDR4 ECC (or non-ECC) memory that is fully compliant with the COM Express mechanical specification.

An integrated Intel 10G Ethernet controller supports a maximum of four 10GBASE-KR interfaces, relevant sideband signals and NC-SI. The Express-DN7 is designed to serve customers with optimized computing capability per watt and high speed connectivity requirements who want to outsource the custom core logic of their systems for reduced development time. Input/output features include expanded PCIe bandwidth up to two PCIe x8 Gen3 lanes, a single onboard Gigabit Ethernet port with IEEE 1588 support suitable for real-time applications, USB 3.0/2.0 ports, and SATA 6 Gb/s ports.

Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS with CMOS backup, supporting embedded features such as remote console, hardware monitor, and watchdog timer.

Technical specifications
Processor Intel Atom Processor C3000 SoC, 14nm (formerly codename: “Denverton-NS”)
Atom C3808 2.0GHz 12MB, 25W (12C/2133MHz, eTEMP)
Atom C3708 1.7GHz 16MB, 17W (8C/2133MHz, eTEMP)
Atom C3508 1.6GHz 8MB, 12W (4C/1866MHz, eTEMP)
Atom C3308 1.6/2.1GHz 4MB, 10W (2C/1866MHz, eTEMP)
Atom C3958 2.0GHz 16MB, 31W (16C/2400MHz, by request)
Atom C3858 2.0GHz 12MB, 25W (12C/2400MHz, by request)
Atom C3758 2.2GHz 16MB, 25W (8C/2400MHz, by request)
Atom C3558 2.2GHz 8MB, 16W (4C/2133MHz, by request)
Atom C3538 2.1GHz 8MB, 15W (4C/2133MHz, by request)
Atom C3338 1.5/2.2GHz 4MB, 9W (2C/1866MHz, by request)

Supports: Intel Quick Assist Technology (Crypto and Compression accelerator), Intel VT (including VT-x, VT-d, VT-x with Extended Page Tables), Intel Turbo Boost Technology 2.0, Intel SSE4.2, Intel 64 Architecture, Intel ISA compatibility, Intel Execute Disable Bit, Intel OS Guard, Intel Secure Key, Intel AES-NI, Intel Security Hash Algorithm Extensions (SHA-1, SHA-256)

Note: Availability of features may vary between SoC SKUs
Memory Up to dual channel 2400/2133/1866 MHz DDR4 ECC (or non-ECC), up to 48GB in three SODIMM sockets

Notes: Memory frequency & capacity depends on SKUs; 3rd SO-DIMM supported by build option.
Embedded BIOS AMI EFI with CMOS backup in 16MB SPI BIOS
Cache 16MB for C3708/C3958/C3758,
12MB for C3808/C3858,
8MB for C3508/C3558/C3538,
4MB for C3308/C3338
Expansion Busses Up to 1 PCI Express x8 Gen3; CD connector (lanes 16-23 x8, x4, x2 (or x1), four controllers)
Up to 1 PCI Express x8 Gen3; AB & CD connector, lanes 0-7 (x8, x4, x2 (or x1), four controllers, dependent on GbE support)
LPC bus, SMBus (system) , I2C (user)

Note: PCI Express ports dependent on SoC SKU
SEMA Board Controller Supports: Voltage/current monitoring, power sequence debug support, AT/ATX mode control, logistics and forensic information, flat panel control, general purpose I2C, failsafe BIOS (dual BIOS, opt. support), watchdog timer and fan control
Debug Header 40-pin multipurpose flat cable connector for use with DB-40 debug module providing BIOS POST code LED, BMC access, SPI BIOS flashing, power testpoints, debug LEDs

MIPI60 header for debug of CPU (build option)
10G Ethernet Intel MAC/PHY
Intel 10G Ethernet Controller integrated in SoC (two controllers)

10G Interface
Up to 4x 10GBASE-KR (bandwidth dependent on SoC SKU)

Ethernet Intel MAC/PHY: Intel i210
Interface: 10/100/1000 GbE connection
NC-SI supported on AB connector, connected to GbE controller
Multi I/O and Storage USB:
Up to 2x USB 3.0/2.0 (USB 0,1), 2x USB 2.0 (USB 2,3)
Note: USB ports dependent on SoC SKU

SATA:
Up to 2x SATA 6Gb/s (SATA 0,1)
Note: SATA ports dependent on SoC SKU

Serial:
2 UART ports with console redirection

GPIO/SD:
4 GPO and 4 GPI (GPI with interrupt)

eMMC:
eMMC 5.0 (build option)
8GB/16GB/32GB/64GB
As storage device
Super I/O Supported on carrier if needed (standard support for W83627DHG-P)
TPM Chipset: Infineon
Type: TPM 2.0
Power Standard Input: ATX: 12V±5%, 5Vsb ±5% or AT: 12V±5%
Wide Input: ATX: 8.5-20V, 5Vsb ±5%; AT: 8.5-20V
Management: ACPI 5.0 compliant, Smart Battery support
Power States: C1-C6, S0, S1, S3, S4, S5 , S5 ECO mode (Wake-on-USB S3/S4, WOL S3/S4/S5)
ECO mode: Supports deep S5 mode for power saving
Operating Systems Standard Support
Windows Server 2012/2016 64-bit,
Yocto Linux 64-bit
Extended Support (BSP)
Yocto Linux 64-bit
Form Factor PICMG COM.0 Rev 3.0 , Type 7
Dimension Basic size: 125 mm x 95 mm

Environmental and physical specifications

Operating temperature Standard: 0°C to 60°C
Extreme Rugged: -40°C to +85°C (optional by project basis, only for eTEMP SKUs)

Humidity 5-90% RH operating, non-condensing
5-95% RH storage (and operating with conformal coating)
Shock and Vibration IEC 60068-2-64 and IEC-60068-2-27
MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D
HALT Thermal Stress, Vibration Stress, Thermal Shock and Combined Test
Model Description
Express-DN7-C3808 Basic size COM Express Type 7 module with IntelR AtomR C3808, 12C (eTEMP)
Express-DN7-C3708 Basic size COM Express Type 7 module with IntelR AtomR C3708, 8C (eTEMP)
Express-DN7-C3508 Basic size COM Express Type 7 module with IntelR AtomR C3508, 4C (eTEMP)
Express-DN7-C3558 Basic size COM Express Type 7 module with IntelR AtomR C3558, 4C
Express-DN7-C3538 Basic size COM Express Type 7 module with IntelR AtomR C3538, 4C
Express-DN7-C3308 Basic size COM Express Type 7 module with IntelR AtomR C3308, 2C (eTEMP)
Express‑DN7‑C3958 Basic size COM Express Type 7 module with IntelR AtomR C3958, 16C
Express-DN7-C3338 Basic size COM Express Type 7 module with IntelR AtomR C3338, 2C
Express-DN7-C3858 Basic size COM Express Type 7 module with IntelR AtomR C3858, 12C
Express-DN7-C3758 Basic size COM Express Type 7 module with IntelR AtomR C3758, 8C
HTS-DN7-B Heatspreader for Express-DN7 with threaded standoffs for bottom mounting
HTS-DN7-BT Heatspreader for Express-DN7 with through hole standoffs for top mounting
THS-DN7-BL Low profile heatsink for Express-DN7 with threaded standoffs for bottom mounting
THS-DN7-BTL Low profile heatsink for Express-DN7 with through hole standoffs for top mounting
THSH-DN7-BL High profile heatsink for Express-DN7 with threaded standoffs for bottom mounting
THSF-DN7-BL High profile heatsink with Fan for Express-DN7 with threaded standoffs for bottom mounting
COM Express Type 7 Starter Kit Plus COM Express Type 7 Starter Kit Plus. Note: Two starter kits are available: one supporting SPF+ and one supporting 10GBASE-T
Login / Registration
укажите почту
введите пароль
Forgot password?
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters