DAQ-2000 Series
Vendor:ADLINK Technology Inc.
- Details
- Specification
- Order information
- Supports a 32-bit 3.3 V or 5 V PCI bus
- 4-CH differential analog inputs
- Up to 2 MS/s simultaneous-sampling rate (DAQ-2010)
- Operating temperature: 0°C to +55°C (32°F to 131°F)
Adlink DAQ-2010, DAQ-2005 and DAQ-2006 are simultaneous-sampling multifunction DAQ cards to meet a wide range of application requirements.
The devices can simultaneously sample 4 AI channels with differential input configuration in order to achieve maximum noise elimination. They also provide 2-CH 12-bit analog outputs with waveform generation capability, which can be performed together with analog input functions.
If more analog input or output channels are required, multiple cards can be synchronized through the SSI (system synchronization interface) bus. This makes the DAQ-2000 series ideal for the stimulus/response test.
The DAQ-2000 series also feature analog and digital triggering, 24-CH programmable digital I/O lines, and 2- CH 16-bit general-purpose timer/counters. The auto-calibration functions adjust the gain and offset to within specified accuracies such that you do not have to adjust trimpots to calibrate the cards.
| Technical specifications | |
|
Analog Input |
|
|---|---|
| Resolution |
14 Bit (PXI/DAQ/DAQe-2010) 16 Bit, no missing codes (PXI/DAQ/DAQe-2005) 16 Bit, no missing codes (PXI/DAQ/DAQe-2006) |
| Number of channels | 4 simultaneous-sampling channels with differential input |
| Maximum sampling rate |
2 MS/s (PXI/DAQ/DAQe-2010) 500 kS/s (PXI/DAQ/DAQe-2005) 250 kS/s (PXI/DAQ/DAQe-2006) |
| Programmable gain | 1, 2, 4, 8 |
| Bipolar input ranges | ±10 V, ±5 V, ±2.5 V, ±1.25 V |
| Unipolar input ranges | 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V |
| Offset error |
±3 mV (PXI/DAQ/DAQe-2010) 2 mV (PXI/DAQ/DAQe-2005) ±1 mV (PXI/DAQ/DAQe-2006) |
| Gain error |
±0.1% of FSR (PXI/DAQ/DAQe-2010) ±0.04% of FSR (PXI/DAQ/DAQe-2005) ±0.03% of FSR (PXI/DAQ/DAQe-2006) |
| Input Coupling | DC |
| Overvoltage protection | Power on: Continuous ±35 V, Power off: Continuous ±15 V |
| Input Impedance | 1 GΩ/100 pF |
| Trigger sources | Software, external digital/analog trigger, SSI bus |
| Trigger modes | Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger |
| FIFO buffer size |
8 k samples (PXI/DAQ/DAQe-2010) 512 samples (PXI/DAQ/DAQe-2005) 512 samples (PXI/DAQ/DAQe-2006) |
| Data transfers | Polling, scatter-gather DMA |
|
Analog Output |
|
| Resolution | 12 Bit |
| Number of channels | 2 voltage outputs |
| Output ranges | 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF |
| Maximum update rate | 1 μs |
| Slew rate | 20 V/μs |
| Settling time | 3 μs to ±0.5 LSB accuracy |
| Offset error |
±3 mV (PXI/DAQ/DAQe-2010) ±1 mV (PXI/DAQ/DAQe-2005) ±1 mV (PXI/DAQ/DAQe-2006) |
| Gain error |
±0.05% of max. output (PXI/DAQ/DAQe-2010) ±0.04% of max. output (PXI/DAQ/DAQe-2005) ±0.04% of max. output (PXI/DAQ/DAQe-2006) |
| Driving capacity | 5 mA |
| Stabililty | Any passive load, up to 1500 pF |
| Trigger sources | Software, external digital/analog trigger, SSI bus |
| Trigger modes | Post-trigger, delay-trigger, and repeated trigger |
| FIFO buffer size | 2 k samples |
| Data transfers | Programmed I/O, scatter-gather DMA |
|
Digital I/O |
|
| Resolution | 16 Bit |
| Number of channels | 2 |
| Compatibility | 5 V/TTL |
| Base clock available | 40 MHz, external clock up to 10 MHz |
|
General Specifications |
|
| Auto Calibration | Yes (+5 V, ±2 ppm/˚C) |
| Dimensions |
160 mm x 100 mm (not including connectors) (PXI-2000 series) 175 mm x 107 mm (not including connectors) (DAQ-2000 series) 168 mm x 107 mm (not including connectors) (DAQe-2000 series) |
| Connector | 68-pin VHDCI-type female |
| Power requirements |
+5 V 1.82 A typical +3.3 V 1.246 A, +12 V 0.448 A typical (DAQe-2010) +5 V 2.04 A typical +3.3 V 1.03 A, +12 V 0.75 A typical (DAQe-2005) +5 V 1.82 A typical +3.3 V 1.02 A, +12 V 0.67 A typical (DAQe-2006) |
|
Environmental and physical specifications |
|
| Operating temperature | 0˚C to 55˚C (32˚F to 131˚F ) |
| Storage temperature | -20˚C to 70˚C (-4˚F to 158˚F) |
| Humidity | 5 to 95%, non-condensing |
| Safety Compliance | CE/FCC, Class A |
| Model | Description |
| DAQ‑2010 | 4-CH 14-Bit 2 MS/s Simultaneous-Sampling Multi-Function DAQ Card |
| DAQ‑2005 | 4-CH 16-Bit 500 kS/s Simultaneous-Sampling Multi-Function DAQ Card |
| DAQ‑2006 | 4-CH 16-Bit 250 kS/s Simultaneous-Sampling Multi-Function DAQ Card |
