ND-6021
Vendor:ADLINK Technology Inc.
- Details
- Specification
- Order information
- Voltage Output: 0 to 10 V
- Current Output: 0 to 20 mA, 4 to 20 mA
- Output Isolation: 5000 VRMS
- Resolution: 12-bit resolution
Adlink’s NuDAM data acquisition modules make up a total acquisition network and control system.
Up to 256 NuDAM modules can be remotely controlled on any RS-485 network from a host computer, via a single serial RS-232, allowing communication from as far as 4000 feet from the host.
Based on the RS-485 multi-drop network system, each module has a unique address ID, whereby simple ASCII command & response protocols through the standard RS-485 interface can control all the NuDAM modules in the RS-485 network.
The NuDAM modules provide direct communications with a wide variety of sensors, perform all signal conditioning, scaling, linearization and conversion, and can acquire measurements of temperature, pressure, flow, voltage, current, and multiple digital signal types.
| Technical specifications | |
|
Interface |
|
|---|---|
| Interface | RS-485, 2 wires |
| Speed (bps) | 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K |
| Isolation Voltage | 5000 Vrms |
|
Analog Output |
|
| Signal Output type | Differential type |
| Resolution | 12 bits |
| Accuracy |
±0.1% of FSR for current output ±0.2% of FSR for voltage output |
| Unit Conversion | V or mA |
| Voltage output range | 0 to 10 V (uni-polar) |
| Current output range | 0 to 20 mA, 4 to 20 mA |
| Maximum Sampling Rate | 100 samples /sec |
| Slew rate of Voltage output | 0.0625 to 64 V/sec |
| Slew rate of Current output | 0.125 to 128 mA/sec |
| Internal Current Load Resistor | 500∧ (%1) |
|
Watchdog Function |
|
| Module internal watchdog timer | 150 ms |
| Power failure threshold | 4.65 V |
| Host programmable watchdog | 100 ms ~ 25.500 sec |
|
Power |
|
| Power supply | +10V to +30V |
| Power consumption | 1.32 W |
| Model | Description |
| ND‑6021 | Analog Output Module |
