PCI-9114
Vendor:ADLINK Technology Inc.
- Details
- Specification
- Order information
- 32-CH single-ended or 16-CH differential inputs
- 16-bit A/D resolution
- Up to 250 kS/s sampling rate (PCI-9114A-DG and PCI-9114A-HG)
- Operating temperature: 0°C to +55°C
ADLINK PCI-9114 series are 32-CH, 16-bit, high resolution multi-function DAQ Cards. The PCI-9114 device features flexible configurations on analog input.
The devices are divided into 2 kinds: normal gain version and high gain version. Both versions provide 4 programmable input ranges for bipolar and unipolar inputs. The A/D on the PCI-9114DG device features a sampling rate of 100 kS/s with resolution at 16 bits, while PCI-9114A-DG/HG device features a sampling rate of up to 250kS/s with resolution at 16 bits.
The device supports automatic analog input scanning, and offers a differential mode for 8-CH analog inputs and maximum noise elimination, as well as single-ended modes for 16- CH analog inputs. The PCI-9114 also features 1-CH 16-bit general purpose timer/counter, 16-CH TTL isolated digital inputs and 16-CH TTL isolated digital outputs.
ADLINK PCI-9114 delivers cost-effective and reliable data acquisition capabilities and is ideal for a broad variety of applications.
| Technical specifications | |
|
Analog Input |
|
|---|---|
| Number of channels | 32 single-ended or 16 differential |
| Resolution | 16 bits |
| Conversion time |
10 μs (PCI-9114DG) 4 μs (PCI-9114A-DG & PCI-9114A-HG) |
| Maximum sampling rate | 100 kS/s (PCI-9114DG) 250 kS/s (PCI-9114A-DG & PCI-9114A-HG) |
| Input ranges (software programmable) |
PCI-9114DG & PCI-9114A-DG: (Gain 1) ±10 V (Gain 2) ±5 V (Gain 4) ±2.5 V (Gain 8) ±1.25 V PCI-9114A-HG: (Gain 1) ±10 V (Gain 10) ±1 V (Gain 100) ±0.1 V |
| Accuracy |
PCI-9114A-HG: (Gain 1) 0.01% of FSR ± 1 LSB (Gain 2,4) 0.02% of FSR ± 1 LSB (Gain 8) 0.04% of FSR ± 1 LSB PCI-9114A-HG: (Gain 1,10) 0.01% of FSR ± 1 LSB (Gain 100) 0.02% of FSR ± 1 LSB |
| Input Coupling | DC |
| Overvoltage protection | Continuous ±35 V |
| Input Impedance | 1 GΩ |
| Trigger modes | software, pacer, and external trigger (5 V/TTL compatible) |
| FIFO buffer size | 1 k samples |
| Data transfers | polling, interrupt |
|
Isolated Digital Input |
|
| Number of channels | 16 |
| Maximum input range | 24 V, non-polarity |
| Digital logic levels |
0 - 24 V, non-polarity Input high voltage: 5 - 24 V Input low voltage: 0 - 1.5 |
| Input resistance | 2.4 KΩ @ 0.5 W |
| Isolation Voltage | 2500 VRMS |
| Data transfers | programmed I/O |
|
Isolated Digital Output |
|
| Number of channels | 16 |
| Output type | open emitter Darlington transistors |
| Sink current |
350 mA for one channel @ 100% duty 260 mA for all channels @ 10% duty |
| Power dissipation | Max. 1.47 W per chip (8 DO channels) |
| Supply voltage | 5-35 V |
| Isolation voltage | 2500 VRMS |
| Data transfers | programmed I/O |
|
Power Output |
|
| Output voltage | +12 V and -12 V |
| Resettable fuse protection | 500 mA |
|
General-Purpose Timer/Counter |
|
| Number of channels | 1 |
| Resolution | 16 bits |
| Compatibility | 5 V/TTL |
| Base clock available | 2 MHz, external clock to 2 MHz |
|
General Specifications |
|
| I/O connector |
37-pin D-sub female 20-pin ribbon male x 2 |
| Power requirements |
+5 V, 600 mA typical +12 V, 100 mA typical |
| Dimensions (not including connectors) | 175 mm x 107 mm |
|
Environmental and physical specifications |
|
| Operating temperature | 0˚C to 55˚C |
| Storage temperature | -20˚C to 80˚C |
| Humidity | 5 to 95%, non-condensing |
| Model | Description |
| PCI‑9114DG | 32-CH 16-bit 100 kS/s Normal Gain Multi-Function DAQ Card |
| PCI‑9114A‑DG | 32-CH 16-bit 250 kS/s Normal Gain Multi-Function DAQ Card |
| PCI‑9114A‑HG | 32-CH 16-Bit 250 kS/s High-Gain Multi-Function DAQ card |
