The PFCQor® Power Factor Correction module is an essential building block of an AC‑DC power supply. Used in conjunction with a holdup capacitor, SynQor’s DC‑DC converters and SynQor’s AC line filter, the PFCQor will draw a nearly perfect sinusoidal current (PF>0.99) from a single phase AC input. The module is supplied completely encased to provide protection from the harsh environments seen in many industrial and transportation environments.
Technical specifications | |
Operational features |
Input voltage range: 85-264Vrms Universal input frequency range: 47 - 63Hz / 360 - 800Hz 350W output power ≥0.99 Power Factor High efficiency: >95% (230Vrms) Internal inrush current limit Auxiliary 10V bias supply |
Mechanical features |
Industry standard quarter-brick pin-out Size: 1.54” x 2.39” x 0.50” (39.0 x 60.6 x 12.7 mm) Total weight: 3.07 oz. (87 g) Flanged baseplate version available |
Safety features |
Input/Output to baseplate isolation 2150Vdc UL 60950-1 CAN/CSA-C22.2 No. 60950-1 EN60950-1 CE Marked |
Control features |
PFC Enable Load Enable (also: Power Out Good signal) |
Protection features |
Input current limit and auto-recovery short circuit protection Auto-recovery input under/over-voltage protection Auto-recovery output over-voltage protection Auto-recovery thermal shutdown |
Compliance features |
(With SynQor AC Line Filter) EN55011 and EN55022, FCC PART 15 EN61000-3-2 |