The ADLINK CM2-BT2 with built-in SEMA Cloud functionality is ready-made for Internet of Things (IoT) applications. CM2-BT2 is able to connect legacy industrial devices and other IoT systems to the cloud, extract raw data from these devices, determine which data to save locally and which to send to the cloud for further analysis. The results these analyses can provide valuable information for policy decision making and generate innovative business opportunities.
Technical specifications | |
Core System |
|
---|---|
CPU |
Dual-core Intel® Atom™ Processor System-on-Chip Atom™ E3825 (2C), 1.33 GHz, 533/- (No Turbo), 6W Supports: single, dual or quad Out-of-Order Execution (OOE) processor cores, Intel® VT-x, Intel® SSE4.1 and SSE4.2, Intel® 64 architecture, IA 32-bit, PCLMULQDQ Instruction DRNG, Intel® Thermal Monitor (TM1 & TM2) Note: Availability of features may vary between processor SKUs. |
Memory | Up to 4GB DDR3L-1066/1333 MHz DDR3L SO-DIMM |
Embedded BIOS | AMI EFI with CMOS backup in 8MB SPI BIOS |
Cache | Primary 32 KiB, 8-way L1 instruction cache and 24 KiB, 6-way L1 write-back data cache |
Expansion Busses | PC/104-Plus (ISA & PCI) |
SEMA Board Controller | Supports: Voltage/Current monitoring, Power Sequence debug support, AT/ATX mode control, Logistics and Forensic information, Flat Panel Control, General Purpose I2C, Failsafe BIOS (dual BIOS), Watchdog Timer and Fan Control |
Debug Headers |
40-pin multipurpose flat cable connector Note: Use in combination with DB-40 debug module providing BIOS POST code LED, BMC access, SPI BIOS flashing, Power Testpoints, Debug LEDs |
Video |
|
GPU Feature Support |
7th generation Intel® graphics core architecture with four execution units Supports two independent displays 3D graphics hardware acceleration Support for DirectX 11, OCL 1.1, OGL ES Halt/2.0/1.1, OGL 3.2 Video decode hardware acceleration including support for H.264, MPEG2, MVC, VC-1, WMV9 and VP8 formats Video encode hardware acceleration including support for H.264, MPEG2 and MVC formats |
LVDS/eDP | Single/dual channel 18/24-bit LVDS from eDP |
VGA | Yes |
Audio |
|
Chipset | Intel® HD Audio integrated in SoC |
Audio Codec | ALC886 |
Ethernet |
|
Intel® MAC/PHY | 2x Intel i210 (MAC/PHY) Ethernet controller |
Interface | 10/100/1000 GbE connection |
I/O Interfaces |
|
USB | 3x USB 2.0 (1x on mSATA) + 1x USB 3.0 |
SATA | 1x SATA 3 Gb/s shared with mSATA (optional 2nd SATA 3GB/s port w/o mSATA support) |
GPIO | 8x |
Serial | 2x RS-232/485 (with full handshake) + 2x RS-232/485 (TX, RX, CTS, RTS only) |
LPC |
|
LPC | LPC UART NCT5104D (Nuvoton) |
Power |
|
Standard Input |
ATX = 5V±5% / 5Vsb ±5% AT = 5V±5% |
Management | ACPI 5.0 compliant |
Power States | C1-C6, S0, S3, S4, S5 (Wake on USB S3/S4, Wake on LAN S3/S4/S5) |
ECO mode | Supports deep S5 (ECO mode) for power saving |
Other |
|
Form Factor | PC/104-Plus |
Dimension | 90 mm x 96 mm |
Operating Systems |
Standard Support: Windows 7/8 32/64-bit, Linux 32/64-bit Extended Support (BSP): WES7/8, WEC7, Linux, QNX, VxWorks |
Environmental and physical specifications |
|
Operating Temperature |
Standard: 0°C to +60°C Extreme Rugged™: -40°C to +85°C |
Humidity |
5-90% RH operating, non-condensing 5-95% RH storage (and operating with conformal coating) |
Shock and Vibration |
IEC 60068-2-64 and IEC-60068-2-27 MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D |
HALT | Thermal Stress, Vibration Stress, Thermal Shock and Combined Test |
Model | Description |
CM2-BT2-E3825 | PC/104-Plus, E3825 (2C), 1.33 GHz, incl. heat spreader, 0°C to 60°C |
CM2-BT2-E3825-CC | PC/104-Plus, E3825 (2C), 1.33 GHz, incl. heat spreader, 0°C to 60°C, conformal coated (HumiSeal 1B73) |
CM2-BT2-E3825-ETT | PC/104-Plus, E3825 (2C), 1.33 GHz, incl. heat spreader, -40°C to 85°C |
CM2‑BT2‑E3825‑ETT‑CC | PC/104-Plus, E3825 (2C), 1.33 GHz, incl. heat spreader, -40°C to 85°C, conformal coated (HumiSeal 1B73) |
DDR3L memory | Verified 2GB, 4GB DDR3L SODIMM memory available |