The ADLVIS-1660 Dual CXP-6 is a rugged, small form factor (SFF) CoaXPress solution intended for military and industrial applications. It’s a two-board small form factor PCIe/104 solution featuring a Quad Intel i7-4700EQ processor with a dual CXP-6 module using the x16 PCIe/104 bus resulting is a stunning 1,250 MB/s effective camera bandwidth.
The ADLVIS-1660 features include small outline coaxial cabling for DIN1.0/2.3 connectors optimized for SFF design. It supports PoCXP, is GENICAM compliant and includes Euresys Memento event logging for efficient application software development. A second CXP-6 module can easily be added to support four 1xCXP-6 cameras or two 2xCXP-6 cameras.
The ADLVIS-1660 targets rugged, small form factor industrial high-performance vision solutions in a host of military and industrial environments. It enables very high-definition applications as well as high-framerate applications in less than ideal environments for security and surveillance, traffic management, science, machine vision and a vast range of next-generation vision products.
Applications: Hyperspectral Imaging, Traffic Surveillance, Security Monitoring and Control, Unmanned Systems — High-Resolution Image/Video Capture, High-Speed Automated Optical Inspection, Very High-Resolution Line-Scan Image Acquisition, Military and Defense ISR, High Frame-Rate Motion Analysis and Recording.
Technical specifications | |
Processor | Quad Intel Core i7-4700EQ |
RAM | 8GB DDR3 |
Form Factor | PCIe/104 (96mm x 115mm) |
Expandability | Expandable to 2x Dual-Port CXP-6 Modules |
Connectors |
2x CXP-6 DIN 1.0/2.3 female connectors System I/O: 26p D-sub connector Camera Power Input: 4p 0.1 in Molex KK 7478 male C2C Link: 2x3 6p 0.1 in header |
Lamp Indicators |
‘A’ ‘B’ HOST LEDS: 2x bi-color red/green FPGA Status LED: bi-color red/green Board Status LED: bi-color red/green |
Interface Standards | CoaXPress 1.0 and 1.1 |
Aggregated Camera Data Transfer Rate | 12.5 Gbits/s (1250MB/s) Maximum |
PoCXP Safe Power |
17W of 24VDC regulated power per CoaXPress port PoCXP device detection and automatic power-on Overload and short-circuit protections |
24V Power Input | Connects to Auxiliar Power input on CoaXpress module |
Camera Support Types |
Area-Scan Cameras: Gray-scale and color (RGB and Bayer CFA) Single-tap (1x-1Y) progressive scan |
Pixel Formats Supported |
Raw, Monochrome, Bayer, RGB, and RGBA (PFNC names): Raw Mono8, Mono10, Mono12, Mono14, Mono16 BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX=GR, RG, GB, or BG RGB8, RGB10, RGB12, RGB14, RGBA16 |
Area Scan Camera Control |
External hardware trigger with optional delay and trigger decimation Accurate control of strobe position with support for early/late strobe pulses |
10 GPIO Lines |
2x differential inputs (DIN) 2x single-ended TTL I/O (TTLIO) 4x Isolated Inputs (IIN) 2x Isolated Outputs (IOUT) |
GPIO Usage |
Any I/O input line can be used by any LIN tool of the I/O Toolbox I/O input lines can be used by any QDC tool in I/O toolbox to decode A/B signals of a motion encoder LIN and QDC tool outputs can be further processed by other tools (DIV, MDV, DEL) to generate trigger events such as:cycle trigger, cycle sequence trigger, start-of-scan trigger and end-of-scan trigger. |
I/O Toolbox Configuration Tools |
Line Input tool (LIN): Edge detector for rising/falling edges of any selected input line Quadrature Decoder tool (QDC): Selected transitions, Backward motion compenasator, 32-bit up/down counter Divider tool: (DIV): Triggeres every Nth input event from any I/O toolbox event source Multiplier/Divider tool: (MDV): Generates m events every d input event from any I/O toolbox event source Delay tool (DEL): Delay up to 16 events from one or two I/O toolbox event sources |
On-Board Memory | 512MB |
Data Stream Statistics |
Measurement of: Frame rate (area-scan only) Line Rate Data Rate Configurable Averaging interval |
Event Signaling and Counting |
EVENT_NEW_BUFFER event on newly filled buffers Custom Event Sources: I/O toolbox events, Camera & Illumination control events CoaXPress data stream events; CoaXPress host interface events Event-specific data State of all System I/O lines sampled at the event occurence |
Environmental and physical specifications |
|
---|---|
Operating Temperature | -20°C to +70°C; Optional -40°C to +85°C |
Model | Description |
ADLVIS-1660 | 3-Card Stack: CXP, i7-4700EQ CPU and PSU; POE ext. power cable; PSU cables, -20°C - +70°C |
ADLVIS-1660-EX | 3-Card Stack: 2-CH CXP, i7-4700EQ CPU and PSU; POE ext. power cable; PSU cables, -40°C -+85°C |
ADLCXP-I/O | Breakout Board w/ DB25 CXP GPIO and LED Activity |
ADLQM87PC-CK | CPU Cable Kit for ADLQM87PC i7-4700EQ |
ADLVIS‑MES9200‑HSP | CXP Heat Spreader for ADLMES9200 Chassis (custom services available) |
ADLQM87PC-SP0600 | ADLQM87PC Cu-Enhanced 0.600” Heat Spreader |
ADLQM87PC-Fansink | ADLQM87PC Cu-Enhanced Heatsink with Dual Fans |