MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
ADG016
PCI Express to PCIe/104 Adapter
This convenient adapter board allows users to install a PCIe/104 card into a standard PCI Express system slot.
Standard Usage
This adapter supports any x1 lane PCIe/104 add-in card. Simply mount the add-in card to the adapter and install the adapter in a PCI Express slot. Most PCIe/104 cards will require the connection of an IDE power cable to the P3 connector on the card. This cable provides the 5V rail to the add-in card.
Once everything is connected, you may begin using the add-in card just as you would any other PCI Express add-in card. No additional configuration is required.
ADG013
PCI-104 to PMC Adapter
This convenient adapter board allows PMC cards such as an IEEE 1386.1 card to be easily incorporated into an existing PCI-104 stack.
The design includes signal multiplexing circuits, allowing multiple PMC cards to operate in a PCI-104 stack using multiple adapters simultaneously.
Constructed with GND and Power Planes, this adapter has exemplary signal integrity and low DC resistance.
Standard Usage
Simply mount the PMC card to the adapter, set the PCI-104 slot selector switch and place into the host system’s PCI-104 stack.
Xtreme/Multi-I/O
Сommunication board
Connect Tech’s Xtreme/Multi-I/O features dual SJA1000 CANbus controllers, isolated serial and CAN ports, and two MultiTech Universal compatible sockets on a single PC/104 board design. This high density communication board offers an all-in-one communication solution, optimizing Size, Weight, and Performance requirements. This innovative product takes full advantage of the latest technologies in jumperless configuration, high voltage isolation and advanced communication functionality.
On-board FPGA and PIC32 microcontroller facilitate jumperless configuration of the board, with the FPGA providing a full-featured J1708 controller. Xtreme/Multi-I/O includes two galvanic isolated CANbus controllers with 2500V isolation protection and advanced networking and configuration capabilities.
The 4x RS-232 ports and 1x RS-485/J1708 port features 2500V isolation protection and individual +5VDC isolated power supplies, providing less noise and increased system protection. With USB connectivity and jumperless setup, extended operating temperature, and versatile options, Connect Tech’s Xtreme/Multi-I/O is ideal for CANbus, serial, wired and wireless communication.
ComSync/PCI-104 Gen. 3
Multi-protocol serial adapter
Based on the PCI bus and a compact form factor, this two‑channel, multi-protocol serial adapter offers high performance, reliable, synchronous or asynchronous serial communications for your industrial or embedded needs.
Providing the maximum in flexibility, this PCI-104 card allows you to choose from multiple electrical interfaces, protocols and encoding schemes to ensure your hardware solution is ideally suited to your specific application.
Xtreme I/O ADC-DAC
PCI-104 Analog and Digital Data Acquisition Board
Connect Tech’s Xtreme I/O ADC-DAC is an analog and digital peripheral board for the PCI-104 small form factor embedded marketplace. This product is ideal for data acquisition, measurement and control applications.
Xtreme I/O Express ADC‑DAC
PCIe/104 Analog and Digital Peripheral Board
Connect Tech’s Xtreme I/O Express ADC-DAC is an analog and digital peripheral board for the PCIe/104 small form factor embedded market place. This product is ideal for data acquisition, measurement and control applications.
The Xtreme I/O Express ADC-DAC supports harsh environments with demanding conditions with an extended temperature range of −40°C to +85°C.
Xtreme/104-Express
PCI/104-Express form factor RS-232/422/485 add-in card
Xtreme/104-Express is Connect Tech’s first PCI/104‑Express multi-port serial board. Fully PCI/104‑Express compliant, this board provides a PCI-104 pass-through connector for easy transition from legacy PCI-104 cards to PCI Express stacks.
Connect Tech’s highest throughput to date, Xtreme/104-Express incorporates a fractional baud rate generator that allows almost any baud rate to be matched accurately. Fail-safe transceivers ensure glitch-free network operations, while industrial temperature grade components make certain your communications are protected from disruptions that can occur in harsh environments.
This PCI/104-Express serial board offers reliability, high data rates and longevity for aerospace, medical, instrumentation and industrial control applications.
SSD-104 SATA 2.5”
SATA 2.5” Drive Carrier
Connect Tech’s SSD/104 SATA 2.5″ Drive Carrier is a complete rugged stackable storage solution that allows any 2.5″ SATA hard drive to be installed into any Type II PCIe/104 stack or embedded system.
The SSD/104 SATA 2.5″ Drive Carrier expands storage capacity and reduces overall storage footprint in an embedded system.
Designed to be used with any 2.5″ SATA drive, the SSD/104 SATA 2.5″ Drive Carrier can be used with the latest SATA III SSD’s for high performance applications or other high capacity drives.
Xtreme/PSU-UC
High Powered PC/104 Form Factor Power Supply
Connect Tech’s Xtreme/PSU-UC is a high efficiency, high powered PC/104 form factor power supply featuring a wide input voltage range that accepts +8 to+36V DC, and provides 115W total output power with +5V, +12V and +5V Standby output voltages.
Xtreme/PSU-UC features on-board Ultracapacitors to provide uninterrupted UPS backup capability. Because it uses Ultracapacitors in the place of batteries the Xtreme/PSU-UC can provide instant shortterm power backup in the event of a power loss or interruption, and be fully charged and ready to provide backup power again within seconds. The Xtreme/PSU-UPS uses rugged components and can operate in the industrial temperature range of −40°C to +85°C / −40°F to +185°F.
Xtreme/PSU-UC can be used in combination with Connect Tech’s stackable CPU and expansion boards for a total design solution, and is ideal for use in a broad range of rugged military and industrial applications.
SMART Battery Adapter
Battery Adapter
Connect Tech’s Smart Battery Adapter allows for easy integration of a SMART battery into an existing PC/104 system. Used in combination with the Xtreme/PSU‑UPS power supply, it provides a complete Power Supply solution with uninterrupted power supply and battery backup functionality.
