Sections All products
Use checkboxes for multiple choice, click a name to enter one section only.
Updating results...
Form Factors All form-factors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
Vendor All vendors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
JANUS-MM-4LP-XT JANUS-MM-4LP-XT PC/104-Plus Quad Isolated CAN Module with 24 Digital I/O High Performance CAN Functionality The Janus-MM-4LP-XT I/O module offers two or four CANbus 2.0B ports with opto-isolation plus 24digital I/O lines. Models are available inboth the PC/104-Plus and PC/104 form factors. AnFGPA core houses the CAN controller logic and provides data rates upto1Mbps. Each port supports standard and extended frames aswell asexpandedTX andRX message queues for enhanced performance. Each port has its own combination isolator and transceiver chip. The Janus-MM-4LP-XT fits awide variety ofrugged and on-vehicle embedded serial I/O application needs. Digital I/O Janus-MM-4LP-XT offers 24programmable digital I/O lines organized asthree 8-bit digital I/O ports. Rugged Design Janus-MM-4LP-XT was designed with harsh applications inmind including latching connectors tofurther improve reliability. Extended temperature operation of −40°C to+85°Cis tested and guaranteed. The module iscompatible with MIL-STD-202G shock and vibration specifications. Key Features All four CAN ports onthe Janus-MM-4LP-XT are driven from anFPGA-based CAN 2.0 bus controller core which provides full CAN2.0B functionality. Each port has anAnalog Devices combination isolation and transceiver chip, independently isolating itfrom the host system and other ports toeliminate sensitivity tonoise and ground shifts inthe network. The product has several jumper configurable options including CAN termination and bias. The digital I/O logic level and pull-up/ pull-down resistors are also jumper configurable. For additional ruggedization, zero ohm jumper-bypass resistors can beinstalled inany configuration. Software Support Janus-MM-4LP-XT comes with abasic CAN driver for Windows7, XPand Linux2.6. The driver supports dual-independent and dual-redundant modes. Hybrid 2xCAN/LIN Hybrid 2xCAN/LIN USB-2xCAN/LIN interface Kvaser Hybrid 2xCAN/LIN is a flexible, dual channel interface that allows each channel to be assigned independently as CAN or LIN. This makes the Kvaser Hybrid 2xCAN/LIN a must-have ’universal interface’ for every engineer involved in automotive communications! With a standard USB connector and two CAN/LIN channels in two separate 9-pin D-SUB connectors, this interface can connect a PC to two CAN buses, two LIN buses, or one CAN and one LIN bus. Feature List: Supports High Speed CAN (ISO 11898-2) up to 1Mbit/s and LIN 2.2A (ISO 17987 Part 1-7) up to 20 kbit/s Capable of sending up to 20000 messages per second, per CAN channel Supports CAN FD up to 5Mbit/s (with proper physical layer implementation) Quick and easy plug-and-play installation Supports CAN 2.0 A and CAN 2.0 B active USB powered (bus V+ reference required for LIN) LEDs indicate device status and bus activity Galvanically isolated CAN buses Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet Supplied with Kvaser CANlib and Kvaser LINlib, free software APIs that are common to all Kvaser hardware and enable the channels to be configured intuitively and fast Extended operating temperature range from -40 to 85 °C Support for SocketCAN, see elinux.org for details Software Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Java, Python and Visual Basic All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available RP1210A Application Programming Interface available
Leaf SemiPro Rugged HS Leaf SemiPro Rugged HS CAN-USB interface Kvaser Leaf SemiPro Rugged HS is a one-channel, IP65-rated, USB interface for High Speed CAN. Ruggedized to handle harsh environments, this interface includes Kvaser's patented MagiSync feature for synchronized time-stamping, and galvanic Isolation for protection against voltage spikes. Major Features IP65 rated lightweight aluminium housing protects against dust and moisture. Automatic and accurate clock synchronization between several Kvaser Leaf SemiPro interfaces through Kvaser MagiSync™. The technical solution is unique and patented by Kvaser. Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers. Supports silent mode for analyzing tools. Low power consumption. Polyurethane cabling for extreme environments. Galvanic isolation of the CAN bus driver stage to protect the hardware. Equipped with a 110 cm (44 in.) long USB cable and a 30 cm (12 in.) long CAN cable. Interfaces the CAN bus with a 9-pin D-SUB connector. Designed for USB 2.0, backward compliant with USB 1.1. Quick and easy Plug-and-Play installation. Software Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads. Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic. All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available. RP1210A Application Programming Interface available. On-line documentation in Windows HTML-Help and Adobe Acrobat format. Leaf Professional Rugged HS Leaf Professional Rugged HS CAN-USB interface Kvaser Leaf Professional Rugged is a one channel, very high performance, USB interface for CAN. With a IP65 rated aluminium housing, it offers the possibility to easily connect your PC and CANbus network. Includes Kvaser's patented MagiSync feature for synchronized time-stamping, and galvanic Isolation for protection against voltage spikes. Major features IP65 rated lightweight aluminium housing. Automatic and accurate clock synchronization between several Kvaser MagiSync-equipped interfaces through Kvaser MagiSync™. The technical solution is unique and patented by Kvaser. Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers. Supports silent mode for analyzing tools. Low power consumption. Excellent EMC performance. Polyurethane cabling for extreme environments. Galvanic isolation of the CAN bus driver stage to protect the hardware. 100% compatible with applications written for all Kvaser hardware with Kvaser's CANlib. Equipped with a 110 cm (44 in.) long USB cable and a 30 cm (12 in.) long CAN cable. Interfaces the CAN bus with a 9-pin D-SUB connector. Designed for USB 2.0, backward compliant with USB 1.1. Quick and easy Plug-and-Play installation. Software Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads. Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic. All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available. RP1210A Application Programming Interface available. On-line documentation in Windows HTML-Help and Adobe Acrobat format
Memorator Pro 2xHS v2 Memorator Pro 2xHS v2 CAN bus interface Kvaser Memorator Pro 2xHS v2 is a professional-level, dual channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation. Connected to a PC with USB2.0, the Kvaser Memorator Pro 2xHS v2 operates as a powerful real time CAN to USB interface, whilst in data logger mode, the compact design of this device makes for the perfect flight recorder. Configurable using Kvaser's Memorator Config Tool, this device is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 is CAN FD compliant. Major Features: Monitor two CAN channels simultaneously using just one device. Log data to an expandable SD card slot. Supports CAN FD up to 8Mbit/s (with proper physical layer implementation). Script functionality allows users to develop customised t-script applications written in the Kvaser t programming language. Power derived from the USB connection, CAN or an in-built power supply. Supports silent mode for analysis tools – listens to the bus without interfering. Detection and generation of error frames and remote frames. LED lights alert user to device status, including signalling a full SD card or card error. Galvanically isolated CAN bus drivers. Automatically time synchronises the data transmitted and received across both buses. Built-in Kvaser MagiSync technology time synchronises with other Kvaser interfaces connected to the same PC, resulting in simpler and more accurate multichannel data capture. Extended operating temperature range from -40 to 85 °C. NOTE: Product ships with Commercial Grade SD card (-25 to +85°C). Industrial Grade SD cards (-40 to +85°C) are available for additional purchase. Contact us for details. Compatible with J1939, CANopen, NMEA 2000® and DeviceNet. Plug and play installation, and a comprehensive user guide to help make t script development quick and easy. Software: Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads. Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Java, Python and Visual Basic. All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available. RP1210A Application Programming Interface available. On-line documentation in Windows HTML-Help and Adobe Acrobat format. T-Cannector v2 T-Cannector v2 CAN bus hub Kvaser T-cannector v2 is a CAN bus hub with three female and one male D-SUB9 connectors. Used typically in application development scenarios, this offers an adjustable CAN termination resistor (120/60/0 Ohm) that provides an affordable and safe way of terminating the CAN circuit, as well as powering devices that take their power from the USB connection or the CAN network to which they are attached, such as Kvaser’s Blackbird and Memorator series. This device comes with a 12V power supply and EU, USA, UK and Chinese plugs. Major Features of Kvaser T-cannector v2: Acts as a CAN bus hub with 3 female and 1 male D-SUB9 connectors Each DSUB9 has screws to secure the connection to the Kvaser CAN interface Adjustable termination via easy-to-use switch 12V 1A power supply LED to indicate power on Voltage range of 12V-24V DC This is a new version of an existing product that responds to user requests for more termination options. Notably our previous product came in two versions: with fixed termination of 120 Ohms and without. The Kvaser T-cannector v2 is extremely price-competitive, providing an external 12V 1A power source for Kvaser CAN interfaces and a safe, trustworthy means of circuit termination that protects customer’s interface investment and will prevent short circuits from damaging their development boards.
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
CAPTCHA
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters