Sections All products
Use checkboxes for multiple choice, click a name to enter one section only.
Updating results...
Form Factors All form-factors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
Vendor All vendors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
T-Cannector v2 T-Cannector v2 CAN bus hub Kvaser T-cannector v2 is a CAN bus hub with three female and one male D-SUB9 connectors. Used typically in application development scenarios, this offers an adjustable CAN termination resistor (120/60/0 Ohm) that provides an affordable and safe way of terminating the CAN circuit, as well as powering devices that take their power from the USB connection or the CAN network to which they are attached, such as Kvaser’s Blackbird and Memorator series. This device comes with a 12V power supply and EU, USA, UK and Chinese plugs. Major Features of Kvaser T-cannector v2: Acts as a CAN bus hub with 3 female and 1 male D-SUB9 connectors Each DSUB9 has screws to secure the connection to the Kvaser CAN interface Adjustable termination via easy-to-use switch 12V 1A power supply LED to indicate power on Voltage range of 12V-24V DC This is a new version of an existing product that responds to user requests for more termination options. Notably our previous product came in two versions: with fixed termination of 120 Ohms and without. The Kvaser T-cannector v2 is extremely price-competitive, providing an external 12V 1A power source for Kvaser CAN interfaces and a safe, trustworthy means of circuit termination that protects customer’s interface investment and will prevent short circuits from damaging their development boards. D-sub 9 pin 120 Ohm termination adapter D-sub 9 pin 120 Ohm termination adapter CAN adaptor Kvaser D-sub 9 pin 120 Ohm termination adapter is a CAN adaptor with a 9-pin male D-Sub connector at one end and a 9-pin female D-Sub socket at the other. Between CAN High (pin 7) and CAN Low (pin 2) there is a built-in 120 Ohm CAN terminating resistor. This adapter provides quick and easy termination to any Kvaser high-speed CAN product. The Kvaser CAN termination adapter is used when there is a need to terminate a CAN node without internal termination or when no CAN node is connected to the bus. The Kvaser D-sub 9 pin 120 Ohm termination adapter has a 9-pin male D-Sub plug connector and a 9-pin female D-Sub socket. A 120 ohm terminating resistor sits between pins 2 and 7.
USBcan Light 4xHS USBcan Light 4xHS USB-CAN interface with 4 high speed CAN buses The USBcan Light 4xHS is a compact, reliable and cost-effective means of connecting four high speed CAN buses to a PC or mobile computer. With galvanic isolation as standard, this USB to quad channel CAN interface has a standard USB connector at one end and four high speed CAN channels in a single 26-pin HD D-SUB CAN connector at the other. The supplied HD26-4xDS9 splitter can be used to connect to four separate 9pin DSUB connectors. USBcan Pro 2xHS v2 USBcan Pro 2xHS v2 USB-CAN interface with CAN FD support The USBcan Pro 2xHS v2 is a USB to dual channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors, it is high-performance, yet compact, and can be used as a simple dual-channel interface to connect two high speed CAN buses to a PC or mobile computer, or can be programmed to do more. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device. Feature List: Supports CAN FD Quick and easy plug-and-play installation Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers Power is taken from the USB bus Galvanic isolation High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet Kvaser MagiSync provides automatic time synchronization between several PC-to-bus interfaces connected to the same PC Programming functionality to support interface mode e.g. Optimize protocol handling, pre-filter CAN messages directly on the interface, or simulate missing hardware Simultaneous operation of multiple devices Software: Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads Units are shipped with Kvaser TRX, a lightweight development environment Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available RP1210A Application Programming Interface available On-line documentation in Windows HTML-Help and Adobe Acrobat format
Memorator Light HS Memorator Light HS CAN interface Designed for troubleshooting any CAN-based (controller area network) system, the Kvaser Memorator Light HS is an easy-to-use tool for logging serial data, with no preconfiguration or software setup required. With an autobaud function that determines CAN bus bit rate, the Kvaser Memorator Light can be attached to any high-speed CAN bus without configuration. All CAN bus traffic is logged in a circular buffer, overwriting the oldest data when the buffer becomes full. A separate circular buffer keeps track of error frame conditions and the message traffic that occurs near the conditions. Major Features Single high-speed CAN channel (compliant with ISO 11898-2). Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers. Supports bit rates from 10 Kbit/sec up to 1 Mbit/sec. Auto detects bit rate — removes the need for configuration. Always in silent mode — log bus traffic without interfering. 1 GByte of internal memory for message storage. All received CAN frames recorded in a circular buffer — oldest data overwritten by newest. A second circular buffer records 1000 messages before and after an error frame occurs. The Kvaser Memorator Light extraction software provides easy access to the recorded data when connected to the device via a USB port. The tool supports multiple formats used by popular analysis software. In addition, the extraction software allows the user to clear and reinitialize the device’s memory Software Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic. All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 and RP1210A Application Programming Interfaces available. USBcan Professional 5xHS USBcan Professional 5xHS USB-CAN interface CAN FD ready Kvaser USBcan Pro 5xHS is a five channel, high performance, CAN bus interface that provides a quick and flexible way to connect your PC to multiple CAN bus, in real-time. With all channels configured for High Speed CAN (ISO 11898-2), the Kvaser USBcan Pro 5xHS handles transmission and reception of standard and extended CAN messages on the bus with a high time stamp precision. This device is CAN FD ready.
Leaf Light HS v2 OBDII Leaf Light HS v2 OBDII USB-CAN interface The Leaf Light v2 OBDII provides a simple way of connecting a PC with a vehicle’s on-board computer by means of USB 2.0 connector and a 16-pin OBDII-compliant CAN connector. Having made its name as the work-horse of USB to CAN interfaces, Kvaser’s Leaf Light product series provides reliable, low cost tools for connecting any CAN network to a PC or mobile computer in vehicle diagnostic applications and beyond. BlackBird SemiPro HS/HS BlackBird SemiPro HS/HS Wireless USB/CAN PC interface Kvaser BlackBird SemiPro is a powerful and versatile WLAN solution that is able to function over existing wireless infrastructure or to generate it’s own ’hotspot’ wireless network. Kvaser BlackBird SemiPro is a high performance wireless communication link to the CAN bus utilizing WLAN technology, which offers increased mobility and extended range of coverage for CAN bus networks. Major features: - WLAN version 802.11b/g - Encryption: WPA2/WPA/WEP128/WEP64 - Accessibility: Public/Private - Provides the functionality of a WLAN and a USB to CAN bus interface in a single device - Designed for USB 2.0, backward compliant with USB 1.1 - IP67 rated lightweight aluminium housing - Messages are time-stamped and synchronized with a precision of 25 microsecond - Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers - Supports silent mode for analyzing tools - Polyurethane cabling for extreme environments - Galvanic isolation of the CAN bus driver stage to protect the hardware - 100% software compatible with applications written for all Kvaser hardware with Kvaser CANlib SDK - Equipped with a 45 cm (17.7 in.) long CAN cable - Interfaces the CAN bus with a D-SUB connector - Quick and easy Plug-and-Play installation - Operating voltage CAN bus (7 — 40 V DC) - Includes DSUB 15 pin to 2xDSUB 9 pin adapter
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
CAPTCHA
Loading data...
Subscribe to newsletter
specify your contacts