Sections All products
Use checkboxes for multiple choice, click a name to enter one section only.
Updating results...
Form Factors All form-factors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
Vendor All vendors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
new Ziggy Ziggy Miniature, low-cost carrier board for NVidia Jetson TX2 / TX2i module Ziggy offers a compact, low cost platform for evaluation of Jetson computer modules as well as implementation of a marketable solution for AI and machine learning applications. Ziggy provides access to the most popular I/O features of the Jetson modules, including camera, Ethernet, USB, and serial. In addition it features a unique data acquisition circuit with analog input, analog output, and digital I/O to enable Ziggy to interface to the «real world» of analog and digital sensors and controls. Diamond provides a complete Linux BSP for Ziggy with built-in support for all I/O including the data acquisition features. A GUI provides convenient real-time control of the data acquisition I/O. The ZiggyBox is a cost-effective, compact, complete turnkey Jetson computing solution consisting of a Jetson TX2/TX21i module installed on a Ziggy carrier board and housed in an enclosure with table-top, wall mount, or DIN-rail mount capability. new Jethro Jethro Miniature, I/O-rich carrier board for NVidia Jetson TX2 / TX2i module Jethro offers a compact, low cost solution for implementation of high-performance computing solutions based on the NVidia Jetson TX2/TX2i computer modules. Jethro provides access to most I/O features of the Jetson modules, including camera, Ethernet, USB, and serial. In addition it features a unique data acquisition circuit with analog input, analog output, and digital I/O to enable Jethro to interface to the «real world» of analog and digital sensors and controls. All I/O on Jethro uses latching connectors for increased resistance to shock and vibration. This plus an operating temperature range of −40 to +85°C make Jethro an ideal choice for deploying Jetson computing technology in vehicle or outdoor environments. Diamond provides a complete Linux BSP for Jethro with built-in support for all I/O including the data acquisition features. A GUI provides convenient real-time control of the data acquisition I/O Mass storage Jethro contains an M.2 2242 size socket for the addition of up to 256GB of additional SATA-based mass storage. A micro-SD socket is also provided. Expansion capabilities A PCIe minicard socket enables the installation of additional I/O to meet the needs of diverse applications. A modem socket on Jethro enables the installation of cost-effective and pre-approved Nimbelink™ Skywire® cellular modems featuring a range of global cellular standards.
new Elton Elton High-Performance Carrier System for NVIDIA Jetson AGX Xavier Module Ideal Platform for compute-intensive rugged embedded applications With its NVIDIA Xavier computing power, rugged design, and PCIe/104 expansion capability, Elton offers the ideal platform for implementing high performance computing and AI applications in mobile and harsh environments. Elton utilizes the NVIDIA Jetson AGX Xavier embedded computer module to deliver unmatched performance for AI, machine learning, image processing, and other compute-intensive tasks. The Xavier module delivers up to 30 TeraOps in performance (3×1013 operations per second) at a maximum power dissipation of 30 watts. Xavier also offers scalable performance for applications requiring lower overall power consumption of 10 or 15 watts. The module runs at 32 TOPs on a 512-core Volta GPU with Tensor Cores and accelerators, enabling high-performance AI-powered autonomous machines like never before. At 87×100mm (3.4×3.9″) it is slightly bigger than the other Jetson modules. Elton provides numerous sockets for I/O expansion. An industry-standard camera module socket supports the attachment of up to 8 CSI cameras (up to 4 cameras with 4K resolution). An M.2 socket supports the use of PCIe x4 NVMe flash storage up to 256GB. An LTE module socket supports the use of NimbeLink SkyWire cellular modems, featuring a broad range of solutions with worldwide compatibility. Standard PC-style I/O on Elton includes 2 USB 3.0 ports, 2 USB 3.1 ports, HD audio, HDMI and LVDS display, and 4 RS-232/422/485 ports with software configurability. All I/O is provided on pin headers that are compatible with both common non-latching and rugged latching mating cables, making Elton ideal for applications in environments subject to high shock and vibration. NVIDIA Meets PC/104 Unique among NVIDIA computing module carriers, Elton employs a PCI/104-Express expansion socket. The socket provides support for PCI-104, PCIe/104 type 2 (x8 lane), and PCIe/104 OneBank expansion modules (4×1 lanes), enabling rapid creation of truly rugged, custom-configured, high performance, PCIe-based solutions using off-the-shelf I/O modules from a large number of manufacturers worldwide. Typical PCIe/104 I/O expansion includes 1G/10G Ethernet, video capture, and high resolution video display. A wide variety of industrial I/O modules, including analog, digital, serial, motion control, and other types is also available. Data Acquisition A built-in data acquisition circuit provides 12-bit A/D up to 1MSPS, 12-bit D/A, and 3.3V GPIO. DiamondТs free C-language programming library simplifies application development, while a GUI control panel offers convenient control and monitoring of real-world processes as well as ready-to-run data logging capability. Unique and Rugged Unique among NVIDIA module carriers, Elton offers a full PCI/104-Express expansion socket with PCIe x8, PCIe x1, and PCI expansion capabilities in a solution designed for vehicle and harsh environment applications. Elton bridges the world of NVIDIA high performance computing and graphics capabilities and the world of PC/104 rugged systems. Elton is the first product to bring NVIDIA into the PC/104 ecosystem and helps to prove the enduring value of PC/104 as the PCIe expansion system of choice for small form factor, high performance, rugged embedded computer systems. new Stevie Stevie High-Performance "translator" board for NVIDIA® Jetson™ AGX Xavier™ Module Adds expansion sockets and enables TX2 carriers to work with AGX Xavier Module. Stevie™ is a unique «translator» board that enables the Ziggy and Jethro TX2 carriers to be used with the higher performance AGX Xavier module. Stevie™ adds an M.2 PCIe NVMe flash socket, 2 CAN ports, and an additional USB 3.0 port, as well as a socket for connecting high performance cameras, thus rounding out the TX2 carriers to provide a complete platform for taking advantage of Xavier’s superior performance and features. Use together with Ziggy or Jethro carrier Adds M.2 and camera module mount 100×87mm (same as Xavier)
Pluto SBC Pluto SBC ETX Form-Factor Embedded-Ready Subsystem with PC/104-Plus Expansion and Configurable CPU Pluto is a high performance, highly integrated board-level embedded-ready subsystem that matches the footprint of the popular ETX computer-on-module (COM) standard. Pluto’s CPU core consists of an ETX CPU module mounted on its bottom side, and is available with your choice of different power/performance CPUs. Pluto utilizes conduction cooling for improved ruggedness and reliability through the use of a heatspreader, improving thermal management and increasing the space for I/O functions and connectors. This innovative design has enabled Pluto to integrate additional serial and Ethernet controllers, a complete set of peripheral interface header connectors, and a PC/104-Plus expansion stack location — all within the compact ETX footprint. Four mounting holes on the bottom of the conduction cooled heatspreader are provided to mount Pluto in an enclosure or to a bulkhead. These mounting holes are #6-32 threaded holes on 2.8″ centers. Choice of CPUs: 1.91GHz Intel Bay Trail E3845 1.65GHz AMD Fusion G-T56N 1.0GHz AMD Fustion G-T40N Pluto is offered in a range of models that vary according to the choice of ETX CPU module and on-board SO-DIMM SDRAM capacity. A choice of ETX COMs offers scalable performance for your application as well as protection from obsolescence through plug compatible CPU modules. It can be used either as a highly integrated embedded component, or as a platform for application development and reference designs. Pluto’s baseboard includes connectors and interfaces for keyboard, mouse, USB, serial, parallel, Ethernet, sound, various mass storage devices. It supports the connection of a wide variety of displays, including CRTs, 18-bit or 24-bit LVDS-interfaced flat panels, and televisions. Power is supplied by means of a robust six-pin terminal block. System Block Diagram Pluto Cable Kit The Pluto cable kit includes cables for Pluto input and output. Number Qty Cable Description 1 2 6989007 Dual USB cable 2 1 6989004 Audio in/out cable 3 2 6989012 SATA data cable 4 1 6989011 PS/2 Keyboard / Mouse cable 5 2 6989015 Ethernet RJ-45 cable 6 2 6989008 Dual Serial Port cable 7 1 6989006 Parallel cable 8 1 6989010 VGA cable 9 1 6989001 Parallel to floppy cable 10 1 6989005 IDE data cable 11 1 6989002 DC Power cable, +5V & +12V, 4-wire 12 1 6989003 DC Power cable, +5V, 2-wire COM Express Modules COM Express Modules Low-power, high-performance, wide-temperature COM Express computer-on-modules These compact, low-power, and powerful COM Express modules are suitable for powering a wide range of embedded applications. Additionally, to support real-world applications subject to temperature extremes these modules are rated for operation over enhanced (-20 to +71 °C) and extended (-40 to +85 °C) temperature ranges. Each Diamond COM Express module integrates a complete set of PC-compatible functions, including a low-power, high-performance Intel processor and from 1GB to 4GB of soldered-on or SO-DIMM system memory. In addition, the modules provides interface controllers for high-resolution displays, gigabit Ethernet, and SATA storage devices, as well as multiple USB 2.0, parallel, digital I/O, and audio ports. By plugging these powerful, plug-and-play COMs into standard or custom application baseboards, OEMs can reduce development costs, minimize design risks, and shorten time-to-revenue while benefiting from the latest embedded technologies.
Express-KL/KLE Express-KL/KLE COM Express Basic Size Type 6 Module with 7th Gen Intel® Core™ 7000 series and Intel® Xeon® Processors (formerly codename: Kaby Lake) The Express-KL/KLE is a COM Express COM.0 R2.1 Basic Size Type 6 module supporting the 64-bit 7th Generation Intel Core and Xeon processor E3 (codename «Kaby Lake-H») with Mobile Intel QM175, HM175, CM238 Chipset. The Express-KL/KLE is specifically designed for customers who need excellent graphics performance and high-level processing performance in a long product life solution. The Express-KL/KLE features Intel Hyper-Threading Technology (up to 4 cores, 8 threads) and DDR4 dual channel memory at 2133/2400 MHz with ECC/non-ECC support determined by CPU/chipset combination to provide excellent overall performance. Intel Flexible Display Interface and Direct Media Interface provide high speed connectivity from the CPU to the Intel QM175, HM175, CM238 Chipset. Integrated Intel Generation 9 Graphics includes features such as OpenGL 4.4/4.3/4.2, DirectX 11, Intel Clear Video HD Technology, Advanced Scheduler 2.0, 1.0, XPDM support, and DirectX Video Acceleration (DXVA) support for full H.265/HEVC 10-bit, MPEG2 hardware codec. In addition, High Dynamic Range is supported for enhanced picture color and quality and digital content protection has been upgraded to HDCP 2.2. Graphics outputs include LVDS and three DDI ports supporting HDMI/DVI/DisplayPort and eDP as a build option. The Express-KL/KLE is specifically designed for customers with high-performance processing graphics requirements who want to outsource the custom core logic of their systems for reduced development time. The Express-KL/KLE has dual stacked SODIMM sockets supporting up to 32 GB of DDR4 ECC/non-ECC memory. In addition to the onboard integrated graphics, a multiplexed PCIe x16 graphics bus is available for discrete graphics expansion. Input/output features include a single onboard Gigabit Ethernet port, eight PCIe x1 Gen3 lanes, USB 3.0 ports and USB 2.0 ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS with CMOS backup, supporting embedded features such as remote console, hardware monitor, and watchdog timer. nanoX-AL nanoX-AL COM Express Mini Size Type 10 Module with Intel® Atom™ E3900 series, Pentium®, and Celeron® SoC The nanoX-AL is a COM Express® COM.0 R3.0 Type 10 module supporting Intel® Atom™ processor E3900 series system-on-chip (SoC). The nanoX-AL is specifically designed for customers who need optmized processing and graphics performance with low power consumption in a long product life solution. The nanoX-AL features the dual/quad core Intel® Atom™ processor E3900 series supporting non-ECC type DDR3L single-channel or dualchannel memory at 1600/1867 MHz to provide excellent overall performance. Integrated Intel® Gen9 LP Graphics includes features such as OpenGL 4.3, DirectX 12, OpenCL 2.0 and support for H.265/HEVC, H.264, MPEG2, VC1, VP9, MVC, JPEG/MJPEG hardware decode. Graphics outputs include DDI ports supporting HDMI/DVI/DisplayPort and single-channel 18/24-bit LVDS (eDP by build option). The nanoX-AL is specifically designed for customers with balanced performance and power consumption requirements who want to outsource the custom core logic of their systems for reduced development time. The nanoX-AL has soldered type non-ECC DDR3L memory up to 8GB. In addition, onboard eMMC memory (8GB/16GB/32GB) and SD signals are available as build options. The nanoX-AL features a single onboard Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as remote console, CMOS backup, hardware monitor, and watchdog timer.
nanoX-BT nanoX-BT COM Express Mini Size Type 10 Module with Intel Atom E3800 series SoC or Celeron Processors (codename: Bay Trail) The nanoX-BT is a COM Express COM.0 R2.1 Type 10 module supporting Intel Atom processor E3800 Series and Intel Celeron N2930/J1900 processor SoC (codename: Bay Trail). The nanoX-BT is specifically designed for customers who need high-level processing and graphics performance with low power consumption in a long product life solution. The nanoX-BT features Intel Atom processor E3800 and Intel Celeron N2930/J1900 processor supporting non-ECC type DDR3L dual-channel memory at 1066/1333 MHz to provide excellent overall performance. Integrated Intel Gen7 HD Graphics includes features such as OpenGL 3.1, DirectX 11, OpenCL 1.1 and support for H.264, MPEG2, VC1, VP8 hardware decode. Graphics outputs include DDI ports supporting HDMI/DVI/DisplayPort and single-channel 18/24-bit LVDS (eDP is optional). The nanoX-BT is specifically designed for customers with high-performance processing graphics requirements who want to outsource the custom core logic of their systems for reduced development time. The nanoX-BT has soldered type non-ECC DDR3L memory for up to 4 GB. In addition, onboard eMCC memory (8/16/32GB) and SDIO signals are optionally supported. The nanoX-BT features a single onboard Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 3 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as remote console, CMOS backup, hardware monitor, and watchdog timer. cExpress-BT2 cExpress-BT2 COM Express® Compact Size Type 2 Module with Intel® Atom™ or Intel® Celeron® Processor SoC (codename: Bay Trail) The cExpress-BT2 is a COM Express COM.0 R2.1 Type 2 module supporting Intel Atom processor E3800 Series and Intel Celeron N2930/J1900 processor SoC (codename: Bay Trail). The cExpress-BT2 is specifically designed for customers who need high-level processing and graphics performance with low power consumption in a long product life solution. The cExpress-BT2 features Intel Atom processor E3800 and Intel Celeron N2930/J1900 processor supporting non-ECC type DDR3L dual-channel memory at 1066/1333 MHz to provide excellent overall performance. Integrated Intel Gen7 HD Graphics includes features such as OpenGL 3.1, DirectX 11, OpenCL 1.1 and support for H.264, MPEG2, VC1, VP8 hardware decode. Graphics outputs include DDI ports supporting HDMI/DVI/DisplayPort and single-channel 18/24-bit LVDS (eDP is optional). The cExpress-BT2 is specifically designed for customers with high-performance processing graphics requirements who want to outsource the custom core logic of their systems for reduced development time. The cExpress-BT2 has soldered type non-ECC DDR3L memory for up to 4 GB. In addition, onboard eMCC memory (8/16/32GB) and SDIO signals are optionally supported. The cExpress-BT2 features a single onboard Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 3 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as remote console, CMOS backup, hardware monitor, and watchdog timer. The ADLINK cExpress-BT2 computer-on-module with built-in SEMA Cloud functionality is ready-made for Internet of Things (IoT) applications. The cExpress-BT2 is able to connect legacy industrial devices and other IoT systems to the cloud, extract raw data from these devices, determine which data to save locally and which to send to the cloud for further analysis. The results these analyses can provide valuable information for policy decision making and generate innovative business opportunities.
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
CAPTCHA
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters