Sections All products
Use checkboxes for multiple choice, click a name to enter one section only.
Updating results...
Form Factors All form-factors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
Vendor All vendors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
new Jupiter-MM-5000 Jupiter-MM-5000 Advanced Technology PC/104-Plus DC/DC Power Supply Jupiter-MM-5000 power supplies consist of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, integrated thermal solution, detachable screw terminal block I/O connections, and PC/104 bus connectors. The wide input voltage range of 8 to 32VDC is compatible with industry standard 12V, 24V, and 28V inputs. On-board intelligence provides an unsurpassed level of control, monitoring and safety. All features are accessible and configurable via benchtop application software plus a programming library for real-time control. The Jupiter-MM-5000 uses a state of the art design with the latest generation high efficiency components. It delivers efficiency as high as 95 percent, reducing input power requirements as well as heat generation. Jupiter-MM-5000 was engineered for rugged applications such as automotive or on-vehicle. Extended temperature operation of −40°C to +85°C is tested and guaranteed. Low-profile, surface mount components reduce susceptibility to shock and vibration. Both a low profile heat sink and heat spreader are available. I/O connections are made with locking screw terminal blocks for the highest degree of ruggedness. Advanced System Controller The full featured Jupiter-MM-5312 models include a system controller that offers advanced configuration, control, and monitoring features. The system controller is accessed via a USB port and is accompanied by benchtop configuration software as well as an application library for in-application real-time control. Individual supply on/off control for +12V, +5V, +5V standby, +3.3V, and +3.3V standby outputs Individual supply output voltage / current monitoring Output voltage sequencing and slew rate control Output voltage adjustment Input voltage monitoring Fault handling based on programmable limits with interrupt notification, including supply shutdown in case of overload or other programmed conditions Hiccup mode for auto-restart when fault conditions are removed Min / max voltage and temperature logging Secondary input cutover voltage selection I/O Connectivity Jupiter-5000 has two detachable, locking screw terminal blocks with 14AWG wiring compatibility. The main power input is on a 4-position terminal block featuring dual input conductors for increased current capacity. One terminal blocks supply the output power for +5V and +12V. All output voltages from the supply are also fed to the designated power pins on the PC/104 and PC/104-Plus connectors. There is also a two-pin friction lock pin header for hardwired remote on-off control. JTF Series JTF Series Component power supply 8-15 Watts High Power Density Wide 4:1 Input Range Operating Temperature -40 °C to +105 °C Single & Dual Outputs Standard Remote On/Off 1600 VDC Isolation
TPSi1075 TPSi1075 Isolated 75W DC/DC Power Converter Tri-M's TPSi1075 is an isolated PC/104-Plus power solution, designed for embedded applications requiring isolation and clean power in rugged environments. With wide-range input voltages, transient suppression, galvanic isolation, and quick-disconnect terminal mating plugs, this rugged design is ideal for any industrial application. Designed for harsh environments, including military standards, shock, vibration and extended temperature, the TPSi1075 is well suited for transportation, defence, and aerospace industries. For reliable protection and high performance, the TPSi1075 is the perfect solution for isolated DC power. HPSC104-SER HPSC104-SER 160 Watt UPS High Power PC/104 Vehicle Power Supply with Smart Charging The HPSC104-SER is a DC-DC converter that includes a flash based microcontroller and 4 amp charger for advanced power management and smart battery charging. Combined with a Tri-M standard battery pack or super cap module, the HPSC104-SER can be used as an Uninterruptible Power Source (UPS) for a PC/104 system. The HPSC104-SER is designed for low noise embedded computer systems, has a wide input range of 6 to 40 V DC and is ideal for battery or unregulated input applications. The HPSC104-SER provides up to four stages of battery charging and can charge SLA, NiCd, and NiMh batteries and level two and three SMBus compatible batteries. Charge currents are up to 4A, and battery charging voltages from 10V to 35V DC. The HPSC104-SER has advanced power management functions that allows timed on/off control of the unit, notification of changes to main power and changes in the battery status. For example, the HPSC104-SER can be programmed to power off the main outputs in 60 seconds and then turn them on again 12 hours later. In addition to smart charging and power management the HPSC104-SER can monitor up to 16 different temperatures using digital I²C digital temp sensors. The HPSC104-SER is available as RoHS, is PC/104 compliant and rugged enough for to meet the demands on military and mining vehicle power supplies, including -40°C to +85°C extended temperature rating.
IPWR104HR IPWR104HR 100 Watt Isolated Embedded Power Supply The RTD IPWR104HR embedded power supply module provides an elegant solution for PC/104 systems requiring an isolated reliable power supply. The two available wide input voltage ranges of 18 - 36V and 33 - 75V will suit applications ranging from communications to aviation. The IPWR104HR is available with a wide operating temperature range of -40 to +85 C. Power from the module is delivered to the PC/104 bus as well as to the card edge terminal blocks. Output voltages include +5 at 12A/20A, +12V at 2.0A and -12V at 500mA (100 Watt maximum combined output). These outputs are connected to the PC/104 bus as well as terminal blocks. HE104-75W HE104-75W 75 Watt High Efficiency PC104 Power Supply For applications requiring a DC-DC PC104 power converter that supplies up to 75W of power, Tri-M offers the HE104-75W. It is ideal for use on 12VDC and 24VDC mobile applications where power from a DC source (input) needs to be converted (output) to match the applications power requirements - generally an embedded computer. Efficiency of the HE is over 90% - the higher efficiency means less heat is generated - and it is designed to operate in extended temperature applications where temperatures can be between -40°C and +85°C. Input voltage spikes that go beyond the input voltage window (9VDC to 40VDC) are managed through transient suppressors that restrict the input voltage, while maintaining normal output power operation. The HE104-75W is designed to minimize any generated noise or interference, allowing it to be used for airborne or ground vehicles that encounter EMI or RFI.
HPS3512 HPS3512 203 Watt Max PC104 PSU with HPS-UPS Firmware The HPS3512 is a high power, high performance PC104 PSU that supplies +3.3V, +5V, and +12V outputs. The HPS3512 also includes a flash based microcontroller that supplies advanced power management, and an RS232 serial port. The HPS3512 is designed for low noise embedded computer systems, has a wide input range of 6-40V(>6:1) and is ideal for battery or unregulated input applications. The HPS3512 is specifically designed for vehicular applications and has heavy-duty transient suppressors (up to 18000W) that clamp the input voltage to safe levels, while maintaining normal power supply operation. The HPS3512 is a state-of-the-art Mosfet based design that provides outstanding line and load regulation with efficiencies up to 90 percent. Organic Semiconductor Capacitors (OSC-CON) and Polymerized Organic Semiconductor capacitors (POSCAP) provide filtering that reduces ripple noises below 20mV. The low noise design makes the HPS3512 ideal for use aboard aircraft or military applications or wherever EMI or RFI must be minimized. Constant frequency architecture controllers provide excellent line and load transient response on the +5VDC and +12VDC outputs. The HPS3512 has advanced power supply management functions that allows timed on/off control of the HPS3512, notification of changes to main power and secondary power status. For example, the HPS3512 can be programmed to power off the outputs in 60 seconds, and then turn on again 12 hours later. The HPS3512 size is 3.55 x 3.775 inches, which is the same size as the PC/104 standard, and has the same mounting holes pattern as the PC/104 standard. However, the HPS3512 does not include the PC/104 bus connectors. All generated voltages are provided to a removable header. A removable plug allows the HPS3512 to be easily installed. The RS232 serial port is provided on a 2x5 row pin header. The HPS3512 can be configured to meet almost any power supply and battery powered need for embedded applications, whether that is a simple +5V application, or providing power for backlighted LCD panels. Jupiter-MM Jupiter-MM 50 Watt PC/104 DC/DC Power Supply for Vehicle Applications This rugged, extended-temperature DC/DC power supply is designed specifically for air and ground vehicle applications. It consists of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, heat sink, input and output connectors, power-good indicator lamps, and both 8-bit and 16-bit PC/104 bus headers. Input voltage range is 7 to 30VDC, making it suitable for use with both 12V and 24V systems. Output power is provided directly onto the PC/104 bus connectors, as well as on an auxiliary connector for external tapping. Both dual output (+5, +12) and quad output (+5, +12, -5, -12) versions are available. Up to 10 amps can be provided on the +5 output, or the 50 watts of total power can be distributed across the 4 outputs. The low-profile SMT design guarantees that you can add other PC/104 modules on top of this board without any worries of mechanical interference. Simply stack your CPU and other cards on top or below the power supply module to provide power to your PC/104 system.
HE104-DX HE104-DX 60 Watt output +5V, +12V, -5V and -12V The HE104-DX is a 60 Watt PC/104 DC-DC rugged power supply. The HE104-DX is specifically designed for the rugged requirements of vehicular applications and has heavy-duty transient suppressors (3000W) on both main and secondary inputs) that clamp the input voltage to safe levels, while maintaining normal power supply operation. The HE104-DX is a state-of-the-art Mosfet based design that provides outstanding line and load regulation with efficiencies up to 95 percent. Organic Semiconductor Capacitors provide filtering that reduces ripple noises below 20mV. The low noise design makes the HE104-DX ideal for use aboard aircraft or military applications or wherever EMI or RFI must be minimized. The HE104-DX has a wide input range of 6 - 40V DC (>6:1). The +5V, +12V, -5V and -12V DC outputs are controlled by a constant frequency architecture regulator that provides excellent line and load transient response. The HE104-DX is also available in a low cost, +5V and +12V output only configuration, the HE104-DXL. The HE104-DX is a compact design measuring 3.55" x 3.775" x 0.9" and has an operating temperature of -40° to +85°C. The HE104-DX is available from stock and is now RoHS compliant. HE104+DX HE104+DX 108 Watt High Efficiency PC104+ Embedded Power Supply The HE104+DX is designed for low noise embedded computer systems, has a wide input range of 6-40V (>6:1) and is ideal for battery or unregulated input applications. The HE104+DX is specifically designed for vehicular applications and has heavy-duty transient suppressors (9000W on both main and secondary inputs) that clamp the input voltage to safe levels, while maintaining normal power supply operation. The HE104+DX is an embedded power supply with state-of-the-art Mosfet based design that provides outstanding line and load regulation with efficiencies up to 90 percent. Organic Semiconductor Capacitors provide filtering that reduces ripple noises below 20mV. The low noise design makes the HE104+DX ideal for use aboard aircraft or military applications or wherever EMI or RFI must be minimized. The +5VDC and +12VDC outputs are controlled by a constant frequency architecture regulator that provides excellent line and load transient response. The HE104+DX has an optocoupled on/off input (SD) to control the outputs of the HE104+DX. To enable the HE104+DX outputs, a 6 to 40V signal must be connected to the SD input. If remote control is not required, the SD input can be connected to the main power input. The common for the remote 6 to 40V signal must be connected to the HE104+DX common. If the SD input is connected directly to the main input power connector, the common for the SD input is already done. The HE104+DX is now RoHS compliant.
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
CAPTCHA
Loading data...
Subscribe to newsletter
specify your contacts