Connect Tech’s SSD/104 SATA is a complete rugged stackable solid state drive (SSD) and storage solution that allows up to two mSATA SSD modules to be installed into any PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104 stack or embedded system. SSD/104 SATA solid state drive (SSD) and storage solution improves performance, expands storage capacity and reduces overall storage footprint in an embedded system.
Designed with the latest generation of mSATA SSD modules, SSD/104 SATA solid state drive (SSD) and storage solution can be easily upgraded to accommodate future generations of mSATA modules for even greater system capacity and performance.
When combined with mSATA SSD modules, SSD/104 SATA solid state storage solution directly interfaces with the standard SATA bus, which can be used as a drop-in replacement for any SATA storage device. SSD/104 SATA can also be interfaced with any single board computer or embedded system using standard 7-pin SATA.
SSD/104 SATA is available as a complete storage solution with a preinstalled mSATA module, or as a separate mSATA carrier which supports any mSATA SSD module.
Technical specifications | |
Storage | 128GB, 16GB, 32GB, 4GB, 64GB, 8GB, Up to 256GB maximum using 2 mSATA modules or more with future generations of mSATA modules |
Flash Type | SLC or MLC |
Power Requirements |
+3.3V / 0.5A maximum, Low Power Consumption: 260mA (Active) / 130 mA (Idle), PCI-104 Bus, PCIe/104 Bus |
Interface |
Supports all SATA generations: • SATA I – 1.5Gbps 150MB/s • SATA II – 3Gbps 300MB/s • SATA III – 6Gbps 600MB/s |
Dimensions |
mSATA SSD Module: 2.000" x 1.175" (50.80mm x 29.85mm), JEDEC 300-MB Compliant, Mini PCIe Form Factor Compliant SSD/104 Carrier: 3.550" x 3.775" (90.17mm x 95.89mm), PC/104 Compliant |
Connectors |
3.5mm pitch Phoenix Type power connector, mSATA Connectors, PCI-104 or PCIe/104 stacking connectors (optional), Standard Right Angle 7-pin SATA data connectors |
Cable-Free Operation | SATA signals from PCIe/104 or PCI/104-Express Type 2 SBC |
Ports | Up to 2 mSATA SSD modules |
Environmental and physical specifications |
|
---|---|
Operating Temperature |
Commercial: 0°C to +70°C (+32°F to +158°F), Industrial: -40°C to +85°C (-40°F to +185°F) |
Model | Description |
SDG001 | SSD/104 SATA Stackable SSD. Full Build – Both PCIe./104 and PCI-104 Connectors are installed |
SDG002 | SSD/104 SATA Stackable SSD. PCIe/104 Build – Only PCIe/104 Connector is installed |
SDG003 | SSD/104 SATA Stackable SSD. PCI-104 Build – Only PCI-104 Connector is installed |
SDG004 | SSD/104 SATA Stackable SSD. No bus connectors installed, external power must be used |
SDG007 | SSD/104 SATA Stackable SSD. Power via PCIe/104 or external power. Connects the SATA lanes in the TYPE 2 PCIe/104 Bus to both mSATA drives. Bottom stacking. |