The DMI-1210 is a 12.1″ Driver Machine Interface panel PC designed specifically for the railway industry, equipped with Intel Atom x5-E3930 processor (formerly Apollo Lake), resistive touch, and MVB interface. It can be applied as an HMI unit for driver’s desks, control panel for passenger information systems, surveillance system control/display unit or in railway diagnostics and communications applications.
The DMI-1210 is an EN 50155 certified, cost-effective COTS driver interface that offers train radio display, electronic timetable, and diagnostic display functions and additional functionality such as train data recorder. The DMI-1210 accepts full range DC power input from +16.8V to 137.5VDC. Optional GNSS, 3G/LTE, WLAN, and Bluetooth give system integrators the necessary tools to expand use case possibilities.
With ADLINK’s built-in SEMA management (BMC inside), the DMI-1210 provides easy and effective health monitoring and system maintenance. Robustness and reliability are provided by careful component selection for extended temperature operation, isolated IOs, conformal coated circuit boards, and securable I/O connectors.
Technical specifications | |
System |
|
---|---|
Processor | Intel Atom x5-E3930 processor, 1.3GHz dual-core with ECC (TDP 6.5W) |
Display |
12.1", 4:3 TFT LCD 600cd/m2 luminance 700:1 contrast ratio 1024x768 pixel resolution 5-wire resistive touch Software controlled brightness |
Memory | DDR3L-1600GHz 4GB by SODIMM (optional 8GB) |
Storage |
1x M.2 slot for SATA module onboard 1x CFast slot, accessible with cover eMMC 5.0 32GB by default, 64GB by request |
Ethernet |
2x 1000BASE-T Ethernet ports based on Intel I210-IT 2kV isolation Supports WOL and teaming |
USB |
1x USB 1.1 port with 2kV isolation and M8 connector 1x USB 3.0 Type A port with dust cover for maintenance 1x USB 2.0 wafer connector onboard |
Light Sensor |
Sensor on front bezel to detect ambient illuminance Ready for auto-dimming application development (contact us) |
External I/O |
2x GbE ports via M12 connector 1x USB 1.1 via M8 connector 1x USB 3.0 via Type A connector with cover 2x DB-9 connectors for MVB or CAN bus 1x Mic-in and Line-out port via M8 connector 2x DB-9 RS-232/422/485 serial ports 5x antenna cutouts |
Internal I/O |
2x full size Mini PCI Express slots 2x micro-SIM slots (one is on the bottom side of mainboard) 1x USB 2.0 wafer connectors One PC/104 slot |
Wireless |
2x Mini PCIe card slots are available for cellular modem or WLAN modules Compliant to Mini PCIe card spec v1.2 (PCIe and USB 2.0) Each Mini PCIe slot supports one micro-SIM 4x RP-SMA antenna connector cutouts |
GNSS |
Built in 72 channel high sensitivity GNSS receiver GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1I, Galileo E1B/C SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN 1x SMA antenna connector |
MVB | Supported by PC/104 or Mini PCIe card with two DB-9 outputs |
CAN | Supported by Mini PCIe card with two DB-9 outputs |
Power Supply |
One 4-pin A-coded M12 connector +24V/+36V/+72V/+110VDC nominal power input (16.8V to 137.5V, EN50155 compliant) |
Power Consumption |
AT/ATX (default: AT mode) Max. 22W at 100% loading of CPU |
Status LEDs |
Power Status GbE Activity COM Tx/Rx Activity |
Software |
|
BIOS | AMI |
Board management | ADLINK SEMA 3.5 for WDT, hardware monitor, and fail-safe dual BIOS |
OS | Linux Ubuntu 16.04 LTS, Qt compatible, 64-bit Windows 10 |
Mechanical |
|
Dimension | 310 x 248 x 87.3 mm (w/o power connector) |
Weight | 4.6 kg without add-on modules |
Environmental and physical specifications |
|
Operating Temperature | -25°C to +70°C, EN50155 OT3 class |
Storage Temperature | -40°C to +85°C |
Humidity |
10-90% RH operating, non-condensing 5-95% RH storage, EN 60068-2-30, EN 50155 |
Vibration | EN50155 standard, method EN61373: 2010, Category 1 Class B |
Shock | EN50155 standard, method EN61373: 2010, Category 1 Class B |
IP rating | IP65 front, IP20 rear (IP42 rear by request) |
Safety | EN50124-1(isolation compliance) |
EMC |
EN 50155, EN 50121-3-2 EN 303413 (GNSS) EN 301489-1, EN 301489-19 (GNSS) |
Altitude |
4572m (15000ft) at 25°C MIL-STD-810G Method 500.5, Procedure II2 |
Model | Description |
DMI‑1210‑01, CC | 12.1" touch panel PC, Atom x5-E3930, DDR3L 1600 4GB, with GNSS, no PCIe mini cellular modules, no MVB module, IP42, conformal coating |
DMI‑1210‑02, CC | 12.1" touch panel PC, Intel Atom x5-E3930, DDR3L 1600 4GB, no GNSS, no Mini PCIe cellular modules, no MVB module, IP20, conformal coating |
PC/104 MVB kit |
1x PC/104 MVB card, Duagon D113L.T.-P4B2 (PD only, EMD type) 2x 9-pin D-sub male-to-female cables |
Mini PCIe Card MVB kit |
1x Mini PCIe MVB card, Duagon D017M-P-T-I1-Y30C-M3 (PD only, EMD type) 1x Y-split cable to 9-pin D-sub 1x male + 1x female (TBD) |
Mini PCIe Card CAN bus kit |
1x Mini PCIe CAN card 1x Y-split cable to 9-pin D-sub 2x male |
Mini PCIe Card cellular kit 01 (for TW, China) |
1x Mini PCIe GSM/TD-SCDMA/CDMA/WCDMA/LTE module 2x external antennas 2x internal RF cables |
Mini PCIe Card cellular kit 02 (for Europe) |
1x Mini PCIe GSM/TD-SCDMA/CDMA/WCDMA/LTE module 2x external antennas 2x internal RF cables |
Mini PCIe card WiFi/BT kit |
1x Mini PCIe WiFi/BT module 2x external antennas 2x internal RF cables |
Starter cable kit-DMI-A |
1x 4-pin A-coded M12 AC/DC power supply cable 2x 8-pin A-coded M12 to RJ45 Ethernet cable 1x 4-pin M8 to type A USB 1.1 cable 1x 6-pin M8 to microphone and speaker cable 2x 9-pin D-sub male-to-female cables for MVB |