Express-HL2

COM Express® Basic Size Type 2 Module with 4th Generation Intel® Core™ i7/i5/i3 Processor (codename: Haswell)
  • Details
  • Specification
  • Order information
  • 4th Generation Intel® i7/i5/i3 Processor with Mobile Intel® QM87 Express Chipset
  • Up to 16GB Dual Channel DDR3L at 1600MHz
  • Six PCIe x1, one PCIe x16 and 32-bit PCI-bus
  • Operating Temperature Standard: 0°C to +60°C Extreme Rugged™: -40°C to +85°C (optional)

ADLINK"s Express-HL and Express-HL2 COM Express modules with 4th generation Intel® i7/i5 processor (codename: Haswell) - up to 3.1GHZ quad core - and mobile Intel® QM87 Express chipset offer up to 16GB dual channel DDR3L SDRAM at 1600MHz. The Express-HL is a COM Express Type 6 module offering three independent displays via DDI interface, as well as seven PCIe x1, one PCIe x16 (Gen3) for graphics (or general purpose x8/4/1), four SATA III (6 Gb/s), Gigabit Ethernet, four USB 2.0, and four USB 3.0 interfaces. The Express-HL2 features the COM Express Type 2 pinout and offers 18/24-bit single/dual channel LVDS, Analog CRT, and a legacy 32 bit PCI bus, as well as PATA IDE interface.

The ADLINK Express-HL2 computer-on-module with built-in SEMA Cloud functionality is ready-made for Internet of Things (IoT) applications. The Express-HL2 is able to connect legacy industrial devices and other IoT systems to the cloud, extract raw data from these devices, determine which data to save locally and which to send to the cloud for further analysis. The results these analyses can provide valuable information for policy decision making and generate innovative business opportunities.

  • Show more
Technical specifications

Core System

CPU 4th Generation Intel® Core™ i7 Processors (Mobile) - 22nm (also known as “Haswell“)
i7-4860EQ 2.4 GHz (3.2 GHz Turbo), 47W (4C/GT3)
i7-4700EQ 2.4 GHz (3.4 GHz Turbo), 47W (4C/GT2)
i5-4400E 2.7 GHz (3.3 GHz Turbo), 37W (2C/GT2)
i5-4402E 1.6 GHz (2.7 GHz Turbo), 25W (2C/GT2)
i3-4100E 2.4 GHz (no Turbo) 3MB, 37W (2C/GT2)
i3-4102E 1.6 GHz (no Turbo) 3MB, 25W (2C/GT2)
Celeron® 2000E 2.2 GHz (no Turbo) 35W (2C/GT1)
Celeron® 2002E 1.5 GHz (no Turbo) 25W (2C/GT1)

Supports : Intel® VT, Intel® TXT, Intel® SSE4.2, Intel® HT Technology, Intel® 64 Architecture, Execute Disable Bit, Intel® Turbo Boost Technology 2.0, Intel® AVX2, Intel® AES-NI, PCLMULQDQ Instruction, Intel® Secure Key and Intel® TSX

Note: Availability of the features may vary between processor SKUs.
Memory Dual channel non-ECC 1600/1333 MHz DDR3L memory up to 16GB in dual SODIMM socket
Embedded BIOS AMI EFI with CMOS backup in 8MB SPI BIOS with Intel® AMT 9.0 support
L3 Cache 6MB for i7-4650U, 3MB for i5-4400E, i5-4402E, i3-4100E and i3-4102E
Expansion Busses PCI Express x16 (Gen3) or PCI Express (2 x8 or 1 x8 with 2 x4)
6 PCI Express x1: Lanes 0/1/2/3/4/5
32-bit PCI bus rev 2.3
LPC bus, SMBus (system) , I2C (user)
SEMA Board Controller Supports: Voltage/Current monitoring, Power Sequence debug support, AT/ATX mode control, Logistics and Forensic information, Flat Panel Control, General Purpose I2C, Failsafe BIOS (dual BIOS), Watchdog Timer and Fan Control
Debug Headers 40-pin multipurpose flat cable connector
Use in combination with DB-40 debug module
Providing BIOS POST code LED, BMC access, SPI BIOS flashing, Power Testpoints, Debug LEDs
60-pin XDP header for ICE debug of CPU/chipset

Video

GPU Feature Support Generation 7.5 graphics core architecture, supporting 2 independent and simultaneous display combinations of VGA and LVDS monitors
Encode/transcode HD content
LVDS Single/dual channel 18/24-bit LVDS from eDP (two lanes)
VGA Analog VGA support with 300 MHz DAC
Analog monitor support up to QXGA (2048 x 1536)

Audio

Chipset Intel® HD Audio integrated in chipset
Audio Codec Located on carrier Express-BASE6 (ALC886 standard supported)

Ethernet

Intel® MAC/PHY i217LM (Enterprise SKU) with AMT 9.0 support
Interface 10/100/1000 GbE connection

I/O Interfaces

USB 8x USB 2.0 (USB 0,1,2,3,4,5,6,7)
SATA Four ports SATA 6Gb/s (SATA0, SATA1, SATA2, SATA3)
PATA One PATA IDE single device only
GPIO 4 GPO and 4 GPI with interrupt
Super I/O On carrier if needed (standard support for W83627DHG-P)

TPM

Chipset Atmel AT97SC3204
Type TPM 1.2

Power

Standard Input ATX = 12V±5% / 5Vsb ±5% or AT = 12V±5%
Wide Input ATX = 8.5~20 V / 5Vsb ±5% or AT = 8.5~20V
Management ACPI 4.0 compliant, Smart Battery support
Power States C1-C6, S0, S1, S4, S3, S5 , S5 ECO mode (Wake on USB S3/S4, WOL S3/S4/S5)
ECO mode Supports deep S5 mode for power saving

Other

Form Factor PICMG COM.0: Rev 2.1 Type 2
Dimension Basic size: 125 mm x 95 mm
Operating Systems Standard Support: Windows 7/8 32/64-bit, Linux 32/64-bit
Extended Support (BSP): WES7/8, Linux, VxWorks, QNX

Environmental and physical specifications

Operating Temperature Standard: 0°C to 60°C
Extreme Rugged™: -40°C to +85°C (optional)
Humidity 5-90% RH operating, non-condensing
5-95% RH storage (and operating with conformal coating)
Shock and Vibration IEC 60068-2-64 and IEC-60068-2-27
MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D
HALT Thermal Stress, Vibration Stress, Thermal Shock and Combined Test
  • Show more
Model Description
Express-HL2-i7-4700EQ COM Express® Basic Size Type 2 Module with Intel® Core™ i7-4700EQ at 2.4/1.7 GHz with GT2 level graphics
Express-HL2-i5-4400E COM Express® Basic Size Type 2 Module with Intel® Core™ i5-4400E at 2.7 GHz with GT2 level graphics
Express-HL2-i5-4402E COM Express® Basic Size Type 2 Module with Intel® Core™ i5-4402E at 1.6 GHz with GT2 level graphics
Express-HL2-i3-4400E COM Express® Basic Size Type 2 Module with Intel® Core™ i3-4400E at 2.4 GHz with GT2 level graphics
Express-HL2-i3-4402E COM Express® Basic Size Type 2 Module with Intel® Core™ i3-4402E at 1.6 GHz with GT2 level graphics
Express-HL2-Celeron® 2000E COM Express® Basic Size Type 2 Module with Intel® Celeron® 2000E 2.2 GHz (no Turbo) 35W (2C/GT1)
Express-HL2-Celeron® 2002E COM Express® Basic Size Type 2 Module with Intel® Celeron® 2002E 1.5 GHz (no Turbo) 25W (2C/GT1)
Express-HL2-i7-4860EQ COM Express® Basic Size Type 2 Module with Intel® Core™ i7-4860EQ at 21.8GHz with GT3 level graphics
Accessory
HTS-HL-B Heatspreader for Express-HL2 with threaded standoffs for bottom mounting
HTS-HL-BT Heatspreader for Express-HL2 with thorughole standoffs for top mounting
THS-HL-B Low profile heatsink for Express-HL2 with threaded standoffs for bottom mounting
THS-HL-BT Low profile heatsink for Express-HL2 with thorughole standoffs for top mounting
THSH-HL-B High profile heatsink for Express-HL2 with threaded standoffs for bottom mounting
THSF-HL-B High profile heatsink with Fan for Express-HL2 with threaded standoffs for bottom mounting


  • Show more
Login / Registration
укажите почту
введите пароль
Forgot password?
CAPTCHA
Loading data...
Subscribe to newsletter
specify your contacts