Express-BD74
Vendor:ADLINK Technology Inc.
- Details
- Specification
- Order information
- Intel Xeon D and Pentium D SoC, 14nm process
- 4 SO-DIMMs, up to 128GB dual channel DDR4
- Up to 32 PCIe lanes (24x Gen3, 8x Gen2)
- Extreme Rugged Operating Temperature: -40°C to +85°C
The Express-BD74 is a COM Express COM.0 R3.0 Basic Size Type 7 module supporting the 64-bit Intel Xeon processor D (formerly «Broadwell-DE») system-on-chip (SoC) with up to 4 SO-DIMMs to boost system performance. The Express-BD74 is specifically designed for customers who need excellent computing performance with balanced power consumption and multiple 10G Ethernet connectivity in a long product life solution.
The Express-BD74 features Intel Virtualization Technology (including VT-x, VT-d, EPT), Intel Hyper-Threading Technology (up to 16 cores, 32 threads), Intel Trusted Execution Technology, Intel AES-NI Technology, and 4 SO-DIMMs to provide a maximum of 128GB DDR4 ECC (or non-ECC) memory capacity and dual-channel memory design at 1866/2133/2400 MHz (dependent on SoC SKU) for excellent overall performance.
An integrated Intel 10G Ethernet controller supports two 10GBASE-KR interfaces, relevant sideband signals and NC-SI. The Express-BD74 is designed to serve customers with optimized computing capability per watt and high speed connectivity requirements who want to outsource the custom core logic of their systems for reduced development time.
Input/output features include 24 PCIe Gen3 lanes, up to 8 PCIe Gen2 lanes, a single onboard Gigabit Ethernet port, USB 3.0/2.0 ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS with CMOS backup, supporting embedded features such as remote console, hardware monitor, and watchdog timer.
| Technical specifications | |
| Processor |
Intel Xeon D and Pentium D SoC, 14nm process (formerly ”Broadwell-DE”) Xeon D1559 1.6/2.1GHz 18MB, 45W (12C) (eTEMP) Xeon D1539 1.6/2.2GHz 12MB, 35W (8C) (eTEMP) Xeon D1577 1.3/2.1GHz 24MB, 45W (16C) Xeon D1548 2.0/2.6GHz 12MB, 45W (8C) Note: SKUs not listed above and D1577/D1559 may be supported on a project basis. Please contact us for more information. Supports: Intel VT (including VT-x, VT-d, VT-x with Extended Page Tables), Intel HT Technology, Intel SSE4.2, Intel 64 Architecture, Intel Turbo Boost Technology 2.0, Intel AVX2, Intel TSX-NI, Intel Platform Protection Technology with Intel TXT, Execute Disable Bit, Intel Data Protection Technology with Intel Secure Key, Intel AES-NI Note: Availability of features may vary between processor SKUs. |
| Memory |
Dual channel 1867/2133/2400 MHz DDR4 ECC memory in four SODIMM sockets (two on top, two on bottom), up to 128GB (dependent on SoC SKU) Note: Only D1548 supports up to 2400 MHz |
| BIOS | AMI EFI with CMOS backup in 16MB SPI BIOS |
| Cache |
24MB for D1577 18MB for D1559 12MB for D1548/D1539 |
| Expansion Busses |
PCIe x16 or 2 PCIe x8 or 4 PCIe x4 (Gen3) 8 PCIe lanes (Gen3): AB connector, Lanes 8-15 6 PCIe lanes (Gen2): AB connector, Lanes 0/1/2/3/4/5 Up 2 PCIe lanes (Gen2): CD connector, Lanes 6/7 LPC bus, SMBus (system) , I2C (user) Note: PCI Express lane 7 support in place of GbE |
| SEMA Board Controller | Supports: Voltage/current monitoring, power sequence debug support, AT/ATX mode control, logistics and forensic information, flat panel control, general purpose I2C, failsafe BIOS (dual BIOS, opt. support), watchdog timer and fan control |
| Debug Header | 40-pin multipurpose flat cable connector for use with DB-40 debug module providing BIOS POST code LED, BMC access, SPI BIOS flashing, power testpoints, debug LEDs |
| 10G Ethernet |
Intel MAC/Controller Intel 10G Ethernet Controller integrated in SoC 10G Interface 2x 10GBASE-KR 10G Sideband Signals 10G_INT 10G_PHY_MDIO/MDC & SDA/SCL 10G_PHY_CAP 10G_PHY_RST 10G_LED_I2C 10G_SFP_I2C 10G_SDP NC-SI NC-SI supported on AB connector, connect to GbE controller |
| Ethernet |
Intel MAC/PHY: Intel® Ethernet Connection i210 Interface: 10/100/1000 GbE connection |
| Multi I/O and Storage |
USB: 4x USB 3.0/2.0 (USB 0, 1, 2, 3) SATA: 2x SATA 6Gb/s (SATA0,1) Serial: 2 UART ports with console redirection GPIO: 4 GPO and 4 GPI |
| Super I/O | Supported on carrier if needed (standard support for W83627DHG-P) |
| TPM |
Chipset: Infineon Type: TPM 2.0 |
| Power |
Standard Input: ATX: 12V±5%, 5Vsb ±5%; AT: 12V±5% Wide Input: ATX: 8.5-20V, 5Vsb ±5%; AT: 8.5-20V Management: ACPI 5.0 compliant, Smart Battery support Power States: C1-C6, S0, S1, S3, S4, S5 , S5 ECO mode (Wake-on-USB S3/S4, WOL S3/S4/S5) ECO mode: Supports deep S5 mode for power saving |
| Operating Systems |
Standard Support Windows 10 (64-bit) Windows Server 2012 (64-bit) Windows 7 (64-bit) Linux (64-bit) Extended Support (BSP) Linux (64-bit) |
| Form Factor | PICMG COM.0 Rev 3.0 , Type 7 |
| Dimension | Basic size: 125 mm x 95 mm |
|
Environmental and physical specifications |
|
|---|---|
| Operating temperature |
Standard: 0°C to 60°C Extreme Rugged: -40°C to +85°C (build option, standard voltage only) Note: Extreme Rugged availability dependent on SoC SKU |
| Humidity |
5-90% RH operating, non-condensing 5-95% RH storage (and operating with conformal coating) |
| Shock and Vibration |
IEC 60068-2-64 and IEC-60068-2-27 MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D |
| HALT | Thermal Stress, Vibration Stress, Thermal Shock and Combined Test |
| Model | Description |
| Express-BD74-D1559 | Basic COM Express Type 7 module with Intel Broadwell-DE D1559, 12 core, at 1.5/2.1GHz, 4 SO-DIMMs |
| Express-BD74-D1539 | Basic COM Express Type 7 module with Intel Broadwell-DE D1539, 8 core, at 1.6/2.2GHz, 4 SO-DIMMs |
| Express-BD74-D1548 | Basic COM Express Type7 module with Intel Broadwell-DE D1548, 8C |
| Express-BD74-D1527 | Basic COM Express Type7 module with Intel Broadwell-DE D1527, 4C |
| Express‑BD74‑D1508 | Basic COM Express Type7 module with Intel Broadwell-DE D1508, 2C |
| Express‑BD74‑D1519 | Basic COM Express Type7 module with Intel Broadwell-DE D1519, 4C |
| Express-BD74-D1577 | Basic COM Express Type7 module with Intel Broadwell-DE D1577, 16C |
| HTS-BD74-BL | Heatspreader for Express-BD74 with threaded standoffs for bottom mounting |
| HTS-BD74-BTL | Heatspreader for Express-BD74 with through hole standoffs for top mounting |
| THS-BD7-BL | Low profile heatsink for Express-BD7 with threaded standoffs for bottom mounting |
| THS-BD7-BTL | Low profile heatsink for Express-BD7 with through hole standoffs for top mounting |
| THSH-BD7-BL | High profile heatsink for Express-BD7 with threaded standoffs for bottom mounting |
| THSF-BD7-BL | High profile heatsink with Fan for Express-BD7 with threaded standoffs for bottom mounting |
