The OSM-IMX93 is an OSM R1.1 Size-L module featuring NXP i.MX93 series processor with 2-core Arm Cortex-A55 & M33. With its in-SoC Arm Ethos U-65 microNPU, the module is made for edge solutions needing on-device AI processing at ultra-low power.
The OSM-IMX93 module supports LVDS and DSI graphics output, 2x GbE (1 TSN capable), 2x CAN bus, I2S audio codec interface, USB2 interfaces, and provides 15-year product availability.
Boasting the highest safety standards with a separate security island and available with rugged operating temperature options (-40°C to 85°C), the OSM-IMX93 is your ideal solution for various edge AI applications.
Technical specifications | |
System |
|
---|---|
CPU |
NXP i.MX93 series with 2-core Arm Cortex-A55 & M33 TrustZone Technology with Armv8 Cryptography Arm EthosTM U-65 microNPU |
Memory | 1/2GB LPDDR4 |
L2 Cache | 32kB L1-I, 32kB L1-D, and 64kB L2 cache per core |
Security |
TRDC – Resource Domain Controller: supports up to 16 resource domains Arm TrustZone (TZ) architecture Secure and trusted access control Battery Backed Security Module (BBSM): monotonic counter - Secure real-time clock (RTC) - Zeroizable Mast |
Audio Codec | I2S audio codec located on carrier |
Debug Header | JTAG interface |
Video |
|
GPU Core | PXP 2D accelerator |
MIPI DSI | 1x MIPI DSI 4 lanes (up to 1920x1200p60) |
LVDS | Up to 1366x768p60 or 1280x800p60 |
Camera |
MIPI CSI RX interface: Compatible with MIPI Alliance Interface spec v1.0 Up to 2 data lanes, up to 1.0 Gb/s per lane MIPI-HS, MIPI-LP mode support |
System Storage |
|
SDIO | 1x SDIO (4-bit) compatible with SD/SDIO standard, up to version 3.0 |
eMMC |
32, 64, or 128 GB (build option) Compatible with eMMC spec 4.41, 4.51, 5.0, 5.1 |
Ethernet |
|
Primary LAN | 10/100/1000 Ethernet controller on SoC (TSN capable) |
Secondary LAN | 10/100/1000 Ethernet controller on SoC |
Extension Buses |
|
USB | 3x USB 2.0, 1x USB 2.0 OTG |
UART | 4x UART interfaces (UART A/B has TX/RX/CTS/RTS) |
CAN | 2x CAN2.0B only or mixed CAN2.0B and CAN FD mode, data bit rate up to 8 Mbps |
SPI | 2x SPI |
I2S | 1x I2S interfaces with audio resolution from 16-bits to 32-bits and sample rate up to 192kHz (see Audio Codec support) |
I2C |
2x I2C interfaces: Support for 7-bit and 10-bit address mode Software programmable clock frequency of 100 kbit/s in Standard-mode, 400 Kbit/s in the Fast-mode or 1 Mbit/s in Fast-mode Plus |
GPIO | 16x GPIO with interrupt |
Power |
|
Input | 5V DC +/- 5% |
Operating Systems |
|
Standard Support | Yocto Linux BSP |
Extended Support (BSP) | Foundries.IO |
Mechanical |
|
Form Factor | SGET OSM Specifications 1.1 |
Dimension | OSM Size-L (Large) module 45 mm x 45 mm |
Environmental and physical specifications |
|
Operating Temperature |
Standard: 0°C to 60°C Rugged: -40°C to 85°C |
Humidity |
5-90% RH operating, non-condensing 5-95% RH storage (and operating with conformal coating) |
Shock and Vibration | IEC 60068-2-64 and IEC-60068-2-27, MIL-STD-202 F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D |
HALT | Thermal Stress, Vibration Stress, Thermal Shock and Combined Test |
Model | Description |
OSM-iMX93-2G-32G-CT | OSM Size-L module with NXP i.MX 93 SoC, microNPU, 2GB LPDDR4, 32GB eMMC, 0°C to 60°C |
OSM-iMX93-2G-32G-ER | OSM Size-L module with NXP i.MX 93 SoC, microNPU, 2GB LPDDR4, 32GB eMMC, -40°C to 85°C |
OSM‑iMX93‑2G‑32G‑BW‑CT | OSM Size-L module with NXP i.MX 93 SoC, microNPU, 2GB LPDDR4, 32GB eMMC, AC Wi-Fi BT 5.1, 0°C to 60°C |
NOTE: For certain processor or memory capacity SKUs not listed, please contact us |
|
I-Pi OSM IMX93 | I-Pi OSM development kit based on OSM-IMX93 module including NXP i.MX 93 dual core SoC, in SoC Arm Ethos U-65 microNPU, 2GB LPDDR4 memory, 32GB eMMC, US/EU AC power adapter |