ADLINK ACL-8216 is a 16-CH, 16-bit, 100 kS/s multi-function DAQ Card.
The ACL-8216 device features flexible configurations on analog inputs. It provides analog inputs with 4 programmable input ranges for bipolar inputs.
The A/D on the ACL-8216 device features a sampling rate of up to 100 kS/s with resolution at 16 bits. The device supports automatic analog input scanning, and offers a differential mode for 8-CH analog inputs and maximum noise elimination, as well as single-ended modes for 16-CH analog inputs.
The ACL-8216 also features 2-CH 12-bit analog outputs, 1-CH 16-bit general purpose timer/counter, 16-CH TTL digital and 16-CH TTL digital outputs.
ADLINK ACL-8216 delivers cost-effective and reliable data acquisition capabilities and is ideal for a broad variety of applications.
Technical specifications | |
Analog Input (A/D) |
|
---|---|
Converter | ADS7805 or equivalent, successive approximation type |
Resolution | 16 Bit |
Number of channels | 16 single-ended or 8 differential |
Input Range: (programmable) | Bipolar: ± 10V, ±5V, ±2.5V,±1.25V |
Conversion Time | 8µs |
Sampling Rate |
100KHz maximum for single channel 20KHz maximum for multi-channels multiplexing |
Overvoltage protection | Continuous ± 35V maximum |
Differential Linearity Error | ± 2 LSB |
Accuracy | 0.003%, ± 1 LSB |
Input Impedance | 10MΩ / 5pF |
AD conversion trigger sources | Software, Pacer, and External |
Data Transfer | Pooling, DMA, Interrupt |
Analog Output (D/A) |
|
Converter | DAC7541 or equivalent, monolithic multiplying |
Number of channels | Two double-buffered analog outputs |
Resolution | 12-bit |
Output Range |
Internal reference: (unipolar) 0 to 5V or 0 to 10V External reference: (unipolar) max. +10V or -10V |
Settling time | 30 μs |
Linearity | ±1/2 bit LSB |
Output driving capability | ±5mA max. |
Digital I/O (DIO) |
|
Number of channels | 16 TTL compatible inputs and outputs |
Input Voltage |
Low: Max. 0.8V High: Min. +2.0V |
Input Load |
Low: +0.5V @ -0.2mA max. High: +2.7V @+20mA max. |
Output Voltage |
Low: Max. 0.5V High: Min. +2.7V |
Driving Capacity |
Low: Max. +0.5V at 8.0mA (Sink) High: Min. 2.7V at 0.4mA (Source) |
Programmable Counter |
|
Device | 8254 |
A/D pacer | 32-bit timer (two 16-bit counter cascaded together) with a 2MHz time base |
Pacer Output | 0.00046 Hz to 100 KHz |
Counter | One 16-bit counter with internal 2MHz time base or external clock source |
General Specifications |
|
I/O Base Address | 16 consecutive address location |
Interrupt IRQ | IRQ3, 5, 6, 7, 9, 10, 11, 12, 15 |
DMA Channel | CH1 and CH3 (Jumper selectable) |
Connector | 37-pin D-type connector |
Power Consumption |
+5 V @ 420 mA typical +12V @ 240 mA typical |
Dimension | 163mm(L) x 123mm(W) |
Environmental and physical specifications |
|
Operating temperature | 0˚C to 55˚C (32˚F to 131˚F ) |
Storage temperature | -20˚C to 80˚C (-4˚F to 176˚F) |
Humidity | 5 to 95%, non-condensing |
Model | Description |
ACL‑8216 | 16-CH 16-Bit 100 kS/s Multi-Function DAQ Card |