M-Max SW208/AC
AC Powered Rugged Gigabit Ethernet Switch
Vendor:MicroMax Computer Intelligence
- Details
- Specification
- 8 ports of 10/100/1000 Mbps
- Shock handling up to 40g, Vibration up to 2.5g
- IP66 rated dust and moisture protection
- Operating temperature from -40 to +75 °C
The M-Max® SW208/AC is a ruggedized 8-Port Gigabit Ethernet Layer 2+ Managed Switch providing reliable operation in tough environments including transportation (ground, rail, air and marine), agriculture, and mining and processing. It accepts a wide power supply voltage input, and is tested and guaranteed over temperature range of −40 to +75°C. Its rugged enclosure is designed according to VITA75 footprint. The SW208/AC has eight 10/100/1000 Mbps copper twisted pair ports. Support for control and management is through web interface, and host processor access through a Command Line Interface (CLI).
| Technical specifications | |
| Main features: |
Layer 2+ Managed Switch Built-in microcontroller with management software 8K MAC addresses and 4K VLANs (IEEE 802.1Q) 8K IP multicast group support Programmable multi-layer classifier with 8 QoS queues per port DSCP remarking for IPv4 and IPv6 frames Rapid spanning tree protocol (RSTP) support |
| Connectors: |
1x TVP00RF-9-98P-ND (Power) 8x M12 (Ethernet) All connectors are IP67 |
| LAN: | 8x switched 10/100/1000 Base-T ports |
| Power: | from 90 to 264 V AC 47-63 Hz |
| Power Consumption: | 6 W (typical) |
| Enclosure: |
Rugged full metal enclosure Passive cooling system (no fans) |
| Indication: | Power ON, 8x LAN activity |
| Mechanical (W x H x L): | 203.2 x 38 x 188 mm (without end caps and connectors) |
| Weight: | 1430 g / 3.15 lbs |
|
Environmental and physical specifications |
|
|---|---|
| Operating Temperature: |
-40 to +75 °C Complies with MIL-STD-810G (High temp. method 501.5, Low temp. method 502.5, Procedure I, II) |
| Non-Operating Temperature: | -40 to +85 °C |
| Humidity: | Operating: 5 to 95 % at +25 °C, non-condensing |
| Vibration |
Operating acceleration amplitude up to 2.5g (3–500 Hz) Complies with MIL-STD-810G (Method 514.6, Procedure I, Category 14) |
| Shock: |
Maximum peak shock acceleration up to 40g (11 ms) Complies with MIL-STD-810G (Method 516.6, Procedure V) |
| Dust/Moisture: | IP66 |
