new Venus
Venus 3.5 Inch Core i7/i5 SBC Based on the "Skylake" 6th generation Core i7/i5 U series processor with PassMark rating up to 4800, Venus offers the highest available CPU performance in a small form factor rugged SBC with modest power consumption. It incorporates a full suite of rugged features such as soldered memory, latching connectors, a thicker PCB, and true -40/+85ºC operating temperature, making it suitable for the most demanding vehicle applications. High I/O density, multiple expansion sockets, rugged design, modest power consumption of 14W, and wide temperature operation combine to make Venus an extremely attractive option for applications requiring high CPU performance or ruggedness.
DIAMOND-MM-16RP-AT PC/104 16-Bit Analog I/O Module with Autocalibration The DMM-16RP-AT features top performance and flexibility for a mid-range price. It has 16 single-ended / 8 differential analog voltage inputs with both unipolar and bipolar input ranges, programmable gain, and a maximum sampling rate of 100KHz. The 4 D/A channels and 16 digital I/O lines provide additional real-world control and monitoring capability. The full −40 to +85°C industrial temperature operation ensures reliable and accurate performance in any embedded system application. A fully-featured software library with example programs and a graphical user interface completes the solution to make the DMM-16RP-AT a solid choice for PC/104-Plus embedded systems requiring analog I/O. DMM-16RP-AT is implemented as a PC/104-Plus board, however it features a novel dual bus interface. Both ISA and PCI connectors are installed and connected to the FPGA. The board will autoselect the PCI bus when present, however a jumper can be used to disable the PCI bus and force the board into ISA bus mode if desired. This allows the board to be used in both PCI and ISA bus PC/104 systems (assuming the PCI-104 connector does not pose a mechanical interference problem with other boards in the system). The board uses 3.3V signaling on the PCI bus and must be used only with 3.3V PCI bus SBCs. The ISA bus uses the standard 5V logic levels.
new Diamond-MM-16R-AT
Diamond-MM-16R-AT PC/104 16-Bit Analog I/O Module with Autocalibration The DMM-16R-AT features top performance and flexibility for a mid-range price. It has 16 single-ended / 8 differential analog voltage inputs with both unipolar and bipolar input ranges, programmable gain, and a maximum sampling rate of 100KHz. The 4 D/A channels and 16 digital I/O lines provide additional real-world control and monitoring capability. The full −40 to +85°C industrial temperature operation ensures reliable and accurate performance in any embedded system application. A fully-featured software library with example programs and a graphical user interface completes the solution to make the DMM-16R-AT a solid choice for PC/104 embedded systems requiring analog I/O. DMM-16R-AT is fully compatible with the original DMM-16-AT analog I/O module and can serve as a drop-in replacement offering reduced cost and enhanced digital I/O features. The mechanical design, connector type and pinout, and software interface are all identical the original board, eliminating any mechanical or software engineering efforts.
new nanoX-AL
nanoX-AL COM Express Mini Size Type 10 Module with Intel® Atom™ E3900 series, Pentium®, and Celeron® SoC The nanoX-AL is a COM Express® COM.0 R2.1 Type 10 module supporting Intel® Atom™ processor E3900 series system-on-chip (SoC). The nanoX-AL is specifically designed for customers who need optmized processing and graphics performance with low power consumption in a long product life solution. The nanoX-AL features the dual/quad core Intel® Atom™ processor E3900 series supporting non-ECC type DDR3L single-channel or dualchannel memory at 1600/1867 MHz to provide excellent overall performance. Integrated Intel® Gen9 LP Graphics includes features such as OpenGL 4.3, DirectX 12, OpenCL 2.0 and support for H.265/HEVC, H.264, MPEG2, VC1, VP9, MVC, JPEG/MJPEG hardware decode. Graphics outputs include DDI ports supporting HDMI/DVI/DisplayPort and single-channel 18/24-bit LVDS (eDP by build option). The nanoX-AL is specifically designed for customers with balanced performance and power consumption requirements who want to outsource the custom core logic of their systems for reduced development time. The nanoX-AL has soldered type non-ECC DDR3L memory up to 8GB. In addition, onboard eMMC memory (8GB/16GB/32GB) and SD signals are available as build options. The nanoX-AL features a single onboard Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as remote console, CMOS backup, hardware monitor, and watchdog timer.
Eaglet Compact Form Factor I/O Baseboard with installed ARM Computer-on-Modules The Eaglet SBC combines the Toradex Apalis family of ARM COMs with a wide variety of standard and industrial I/O features to create off-the-shelf solutions for ARM-based industrial embedded computing. Eaglet SBCs include the selected ARM module and heat sink pre-installed on the Eagle baseboard. Eaglet SBCs include the selected ARM module and heat sink pre-installed on the Eaglet baseboard. Eaglet provides a long life, scalable platform for ARM-based application development. Toradex’s Apalis module family currently contains three members, with the newest module, Apalis TK1, recently introduced in July 2016. The Apalis form factor, as well as all processors used on the modules, have long life commitments from their suppliers, ensuring long life availability of the complete product. Customers have great flexibility in selecting not only the price/performance characteristics of the installed COM, but multiple configurations including the number of cores, memory and flash size, and operating temperature range. Most I/O features can be configured to meet any customer’s specific requirements as well as cost and power consumption targets. This includes removal of unneeded features and I/O connectors plus additional ruggedization services.
Helix PC/104 SBC with 1GHz Vortex86DX3 CPU and On-board Data Acquisition Diamond’s family of Helix PC/104 SBCs combines mid-range CPU performance, standard PC I/O, and on-board data acquisition circuitry at a competitive price. Available PC I/O includes 6 USB 2.0, 4 serial ports (2 RS-232/422/485 and 2 RS-232), 1 10/100Mbps Ethernet, and a SATA port. The data acquisition circuit includes 20 16-bit analog inputs, 4 16-bit analog outputs and 27 digital I/O lines configurable as counter/timers and pulse width modulators. Helix supports stackable I/O expansion with PC/104 I/O modules and provides a PCIe MiniCard socket for additional I/O expansion. I/O modules featuring WiFi, Ethernet, analog I/O, digital I/O, and CAN are available in the PCIe MiniCard form factor, providing compact expandability without increasing the total height of the system. Helix SBCs run Linux and Windows Embedded Standard 7. Both Linux and Windows Embedded 7 Software Development Kits are available with bootable images and drivers to get you started on your design project right out of the box. The Helix SBC was designed with rugged applications in mind. With an operating temperature of −40°C to +85°C, soldered on-board memory, and thicker PCB, Helix is an excellent choice for vehicle and other harsh environment applications. Customization Options The following customization options are available for the Helix SBC family. Some of these options are mutually exclusive and minimum order quantities apply. 2GB on-board RAM instead of 1GB Additional Gigabit Ethernet port on D model 1 CANbus 2.0 port mSATA interface shared with PCIe MiniCard socket +8-32V 50W DC/DC wide voltage power input Latching connectors instead of pin headers Replace configuration jumpers with 0 ohm resistors Conformal coating Custom BIOS & custom FPGA code Development Kits Complete Development Kits with a bootable operating system are available with all the components you need to get started on your embedded design project. The kit contains a Helix SBC, 32GB MLC SATA-DOM flashdisk with your choice of Windows Embedded 7 or Linux pre-loaded, cable kit, AC adapter, and software CD. Helix Cable Kit The Helix cable kit includes cables for Helix input and output. Many cables are also available individually.
Jupiter-MM-5000 Advanced Technology PC/104-Plus DC/DC Power Supply Jupiter-MM-5000 power supplies consist of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, integrated thermal solution, detachable screw terminal block I/O connections, and PC/104 bus connectors. The wide input voltage range of 8 to 32VDC is compatible with industry standard 12V, 24V, and 28V inputs. On-board intelligence provides an unsurpassed level of control, monitoring and safety. All features are accessible and configurable via benchtop application software plus a programming library for real-time control. The Jupiter-MM-5000 uses a state of the art design with the latest generation high efficiency components. It delivers efficiency as high as 95 percent, reducing input power requirements as well as heat generation. Jupiter-MM-5000 was engineered for rugged applications such as automotive or on-vehicle. Extended temperature operation of −40°C to +85°C is tested and guaranteed. Low-profile, surface mount components reduce susceptibility to shock and vibration. Both a low profile heat sink and heat spreader are available. I/O connections are made with locking screw terminal blocks for the highest degree of ruggedness. Advanced System Controller The full featured Jupiter-MM-5312 models include a system controller that offers advanced configuration, control, and monitoring features. The system controller is accessed via a USB port and is accompanied by benchtop configuration software as well as an application library for in-application real-time control. Individual supply on/off control for +12V, +5V, +5V standby, +3.3V, and +3.3V standby outputs Individual supply output voltage / current monitoring Output voltage sequencing and slew rate control Output voltage adjustment Input voltage monitoring Fault handling based on programmable limits with interrupt notification, including supply shutdown in case of overload or other programmed conditions Hiccup mode for auto-restart when fault conditions are removed Min / max voltage and temperature logging Secondary input cutover voltage selection I/O Connectivity Jupiter-5000 has two detachable, locking screw terminal blocks with 14AWG wiring compatibility. The main power input is on a 4-position terminal block featuring dual input conductors for increased current capacity. One terminal blocks supply the output power for +5V and +12V. All output voltages from the supply are also fed to the designated power pins on the PC/104 and PC/104-Plus connectors. There is also a two-pin friction lock pin header for hardwired remote on-off control.
PCIe MiniCard Carrier
PCIe MiniCard Carrier PCI/104-Express Quad PCIe MiniCard Carrier The PCIe MiniCard carrier offers four PCIe MiniCard sockets on a compact PCI/104 Express form factor board. All four sockets have PCIe x 1 and USB interfaces and support full size and half size PCIe MiniCard modules. The module provides full support to all sockets while consuming only a single lane of host SBC resources. SIM card support is provided for two sockets. All power is derived from the PCIe/104 connector 5V power tab. The PCI-104 connector provides a pass through connection and is not used by the module. Extended temperature capability (-40°C to +85°C) enables the board to operate in environments with extreme temperature swings, such as vehicles or outdoor installations. For further enhanced ruggedness, zero ohm resistors can replace jumpers.
Pluto SBC
Pluto SBC ETX Form-Factor Embedded-Ready Subsystem with PC/104-Plus Expansion and Configurable CPU Pluto is a high performance, highly integrated board-level embedded-ready subsystem that matches the footprint of the popular ETX computer-on-module (COM) standard. Pluto’s CPU core consists of an ETX CPU module mounted on its bottom side, and is available with your choice of different power/performance CPUs. Pluto utilizes conduction cooling for improved ruggedness and reliability through the use of a heatspreader, improving thermal management and increasing the space for I/O functions and connectors. This innovative design has enabled Pluto to integrate additional serial and Ethernet controllers, a complete set of peripheral interface header connectors, and a PC/104-Plus expansion stack location — all within the compact ETX footprint. Four mounting holes on the bottom of the conduction cooled heatspreader are provided to mount Pluto in an enclosure or to a bulkhead. These mounting holes are #6-32 threaded holes on 2.8″ centers. Choice of CPUs: 1.91GHz Intel Bay Trail E3845 1.65GHz AMD Fusion G-T56N 1.0GHz AMD Fustion G-T40N Pluto is offered in a range of models that vary according to the choice of ETX CPU module and on-board SO-DIMM SDRAM capacity. A choice of ETX COMs offers scalable performance for your application as well as protection from obsolescence through plug compatible CPU modules. It can be used either as a highly integrated embedded component, or as a platform for application development and reference designs. Pluto’s baseboard includes connectors and interfaces for keyboard, mouse, USB, serial, parallel, Ethernet, sound, various mass storage devices. It supports the connection of a wide variety of displays, including CRTs, 18-bit or 24-bit LVDS-interfaced flat panels, and televisions. Power is supplied by means of a robust six-pin terminal block. System Block Diagram Pluto Cable Kit The Pluto cable kit includes cables for Pluto input and output. Number Qty Cable Description 1 2 6989007 Dual USB cable 2 1 6989004 Audio in/out cable 3 2 6989012 SATA data cable 4 1 6989011 PS/2 Keyboard / Mouse cable 5 2 6989015 Ethernet RJ-45 cable 6 2 6989008 Dual Serial Port cable 7 1 6989006 Parallel cable 8 1 6989010 VGA cable 9 1 6989001 Parallel to floppy cable 10 1 6989005 IDE data cable 11 1 6989002 DC Power cable, +5V & +12V, 4-wire 12 1 6989003 DC Power cable, +5V, 2-wire
EMM-DIO4M-XT PC/104 4-Port RS-232/422/485 Serial I/O Module with DIO High Performance Serial I/O Functionality The Emerald-MM-DIO4M-XT is a PC/104 form factor serial module offering 4 programmable serial ports. The module is based on a ST16C554 quad UART with 16-byte TX/RX FIFOs. Programmable features include serial port protocols, line termination, slew rates, enable / shutdown, base addresses, and interrupt status register address. The EMM-DIO4M-XT fits a wide variety of rugged and on-vehicle embedded serial I/O application needs. Digital I/O Lines EMM-DIO4M-XT also offers 48 programmable digital I/O lines. Configurable features include the digital I/O base address, interrupt level, output mode, and voltage level selection. The lines can be set for pull-up / pull-down resistors in two banks of 24 digital I/O lines each. Rugged Design The Emerald-MM-DIO4M-XT was designed with harsh applications in mind including latching connectors to further improve reliability. Extended temperature operation of −40°C to +85°C is tested and guaranteed. The module is compatible with MIL-STD-202G shock and vibration specifications. Key Features Emerald-MM-DIO4M-XT is a programmable PC/104 serial I/O module offering 4 multiprotocol serial ports and 48 digital I/O lines. The serial ports are based on a ST16C554 quad UART with 16-byte TX/RX FIFOs. Each serial port can be independently configured for RS-232, RS-422, or RS-485 protocols, along with programmable 120-ohm line termination. Other programmable serial port features include slew rate, enable / shutdown and base address. All serial ports also feature +/-15KV ESD protection. The serial ports are brought out in pairs to two pin headers with latching connectors for increased isolation and ruggedness. With its wide operating temperature range and high resistance to shock and vibration, the EMMDIO4M-XT fits a wide variety of rugged and on-vehicle embedded serial I/O application needs. EMM-DIO4M-XT also offers 48 programmable digital I/O lines configured as six 8-bit ports. All ports have individual direction control. Ports 0, 1 and 2 offer programmable edge detection with interrupt capability on change of state. Other programmable DIO features include pull-up / pull-down resistors, base address, interrupt level, output mode, and voltage level. Software Support The EMM-DIO4M-XT is compatible with Windows 7/Vista/2000/XP and Linux 2.6. All drivers are shipped with the product.
Login / Registration
укажите почту
введите пароль
Forgot password?
Loading data...
Subscribe to newsletter
specify your contacts