new Astro Astro Carrier for NVIDIA® Jetson™ TX1 Astro is specifically designed to work with the NVIDIA® Jetson™ TX1 supercomputer-on-module. The Astro Carrier provides access to features found on the Jetson TX1 module in an extremely small footprint (87mm x 57mm/3.43" x 2.24"). It makes use of a high density, board-to-board connector that allows for use with Connect Tech’s off the shelf or custom designed break out boards. new Jupiter-MM-5000 Jupiter-MM-5000 Advanced Technology PC/104-Plus DC/DC Power Supply Jupiter-MM-5000 power supplies consist of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, integrated thermal solution, detachable screw terminal block I/O connections, and PC/104 bus connectors. The wide input voltage range of 8 to 32VDC is compatible with industry standard 12V, 24V, and 28V inputs. On-board intelligence provides an unsurpassed level of control, monitoring and safety. All features are accessible and configurable via benchtop application software plus a programming library for real-time control. The Jupiter-MM-5000 uses a state of the art design with the latest generation high efficiency components. It delivers efficiency as high as 95 percent, reducing input power requirements as well as heat generation. Jupiter-MM-5000 was engineered for rugged applications such as automotive or on-vehicle. Extended temperature operation of −40°C to +85°C is tested and guaranteed. Low-profile, surface mount components reduce susceptibility to shock and vibration. Both a low profile heat sink and heat spreader are available. I/O connections are made with locking screw terminal blocks for the highest degree of ruggedness. Advanced System Controller The full featured Jupiter-MM-5312 models include a system controller that offers advanced configuration, control, and monitoring features. The system controller is accessed via a USB port and is accompanied by benchtop configuration software as well as an application library for in-application real-time control. Individual supply on/off control for +12V, +5V, +5V standby, +3.3V, and +3.3V standby outputs Individual supply output voltage / current monitoring Output voltage sequencing and slew rate control Output voltage adjustment Input voltage monitoring Fault handling based on programmable limits with interrupt notification, including supply shutdown in case of overload or other programmed conditions Hiccup mode for auto-restart when fault conditions are removed Min / max voltage and temperature logging Secondary input cutover voltage selection I/O Connectivity Jupiter-5000 has two detachable, locking screw terminal blocks with 14AWG wiring compatibility. The main power input is on a 4-position terminal block featuring dual input conductors for increased current capacity. One terminal blocks supply the output power for +5V and +12V. All output voltages from the supply are also fed to the designated power pins on the PC/104 and PC/104-Plus connectors. There is also a two-pin friction lock pin header for hardwired remote on-off control.
new CM3-BT4 CM3-BT4 Extreme Rugged™, PCI-104 Single Board Computer with Intel® Atom™ Processor System-on-Chip The ADLINK CM3-BT4 with built-in SEMA Cloud functionality is ready-made for Internet of Things (IoT) applications. CM3-BT4 is able to connect legacy industrial devices and other IoT systems to the cloud, extract raw data from these devices, determine which data to save locally and which to send to the cloud for further analysis. The results these analyses can provide valuable information for policy decision making and generate innovative business opportunities. new Helix Helix PC/104 SBC with 1GHz Vortex86DX3 CPU and On-board Data Acquisition Diamond’s family of Helix PC/104 SBCs combines mid-range CPU performance, standard PC I/O, and on-board data acquisition circuitry at a competitive price. Available PC I/O includes 6 USB 2.0, 4 serial ports (2 RS-232/422/485 and 2 RS-232), 1 10/100Mbps Ethernet, and a SATA port. The data acquisition circuit includes 20 16-bit analog inputs, 4 16-bit analog outputs and 27 digital I/O lines configurable as counter/timers and pulse width modulators. Helix supports stackable I/O expansion with PC/104 I/O modules and provides a PCIe MiniCard socket for additional I/O expansion. I/O modules featuring WiFi, Ethernet, analog I/O, digital I/O, and CAN are available in the PCIe MiniCard form factor, providing compact expandability without increasing the total height of the system. Helix SBCs run Linux and Windows Embedded Standard 7. Both Linux and Windows Embedded 7 Software Development Kits are available with bootable images and drivers to get you started on your design project right out of the box. The Helix SBC was designed with rugged applications in mind. With an operating temperature of −40°C to +85°C, soldered on-board memory, and thicker PCB, Helix is an excellent choice for vehicle and other harsh environment applications. Customization Options The following customization options are available for the Helix SBC family. Some of these options are mutually exclusive and minimum order quantities apply. 2GB on-board RAM instead of 1GB Additional Gigabit Ethernet port on D model 1 CANbus 2.0 port mSATA interface shared with PCIe MiniCard socket +8-32V 50W DC/DC wide voltage power input Latching connectors instead of pin headers Replace configuration jumpers with 0 ohm resistors Conformal coating Custom BIOS & custom FPGA code Development Kits Complete Development Kits with a bootable operating system are available with all the components you need to get started on your embedded design project. The kit contains a Helix SBC, 32GB MLC SATA-DOM flashdisk with your choice of Windows Embedded 7 or Linux pre-loaded, cable kit, AC adapter, and software CD. Helix Cable Kit The Helix cable kit includes cables for Helix input and output. Many cables are also available individually.
new ADLQM67PC-2715QE ADLQM67PC-2715QE Embedded Single Board Computer The ADLQM67PC features first Quad core processor available in PC/104 form factor. The 2nd generation Intel Core i7 processor incorporates Intel’s latest embedded two-chip platform. This 2nd generation i7 processor integrates Intel's HD Graphics 3000 engine with AVX (Advanced Vector Extensions) as well as the memory controller functions of a traditional GMCH. The QM67 Platform Controller Hub (PCH) provides PCI-Express I/O bandwidth at twice the speed (5 GT/s) of previous i7 or Core 2 Duo platforms. The ADLQM67PC is ideal for rugged applications where high processor performance is critical. It brings unparalleled performance to applications such as radar and sonar processing, image signal processing, tactical command and control, surveillance and reconnaissance, transportation and railway. In addition to the wide range of rugged and harsh environment applications in which the ADLQM67PC can excel, it also supports a healthy set of features. The ADLQM67PC has a discrete 16-bit digital I/O port as well as separate VGA, LVDS, HDMI and Display Port interfaces. The ADLQM67PC also has 2x RS232 COM ports, 2x SATA 6Gb/s with RAID support, 8x USB2.0, two bootable Gigabit Ethernet LAN, HDA 7.1, and type 1 bottom-stacking PCIe/104 V2.01 supporting Gen2 throughput of 5 GT/s are just a few of the available features. NEW! ADLSST System Sensor Technology Utility The ADLSST System Sensor Technology v2.0 utility brings to the Linux environment the same type of CPU health monitor functions that have previously been readily available only in the Windows environment. ADL Embedded Solutions offers highly effective active and passive thermal solutions designed for this product. new USBcan Pro 2xHS v2 USBcan Pro 2xHS v2 USB-CAN interface with CAN FD support The USBcan Pro 2xHS v2 is a USB to dual channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors, it is high-performance, yet compact, and can be used as a simple dual-channel interface to connect two high speed CAN buses to a PC or mobile computer, or can be programmed to do more. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device. Feature List: Supports CAN FD Quick and easy plug-and-play installation Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers Power is taken from the USB bus Galvanic isolation High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet Kvaser MagiSync provides automatic time synchronization between several PC-to-bus interfaces connected to the same PC Programming functionality to support interface mode e.g. Optimize protocol handling, pre-filter CAN messages directly on the interface, or simulate missing hardware Simultaneous operation of multiple devices Software: Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads Units are shipped with Kvaser TRX, a lightweight development environment Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available RP1210A Application Programming Interface available On-line documentation in Windows HTML-Help and Adobe Acrobat format
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
CAPTCHA
Loading data...
Subscribe to newsletter
specify your contacts