new M-Max SW21X/PS
M-Max SW21X/PS Rugged Gigabit Ethernet Switch M-Max SW21X/PS is a ruggedized 12/14/16-Port Gigabit Ethernet Layer 2+ Managed Switch providing reliable operation in tough environments including transportation (ground, rail, air and marine), agriculture, and mining and processing. It accepts a wide power supply voltage input, and is tested and guaranteed over temperature range of −40 to +75°C. Its rugged enclosure is designed according to VITA75 footprint. Extended salty fog protection is also available upon request. The rugged switch complies with MIL-STD-810G and MIL-STD-704F. The M-Max SW21X/PS has up to sixteen 10/100/1000 Mbps copper twisted pair ports. Support for control and management is through web interface, and host processor access through a Command Line Interface (CLI). The optional embedded power supply is designed to meet MIL-STD-461F specifications. MicroMax, as a manufacturer of ruggedized industrial computers, takes a customized approach to each client. Our engineering group can design M-Max systems to fit customer-specific technical requirements.
new M-Max SW216
M-Max SW216 Rugged Gigabit Ethernet Switch M-Max SW216 is a ruggedized 16-Port Gigabit Ethernet Layer 2+ Managed Switch providing reliable operation in tough environments including transportation (ground, rail, air and marine), agriculture, and mining and processing. It accepts a wide power supply voltage input, and is tested and guaranteed over temperature range of −40 to +75°C. Its rugged enclosure is designed according to the VITA75 footprint. The SW216 has sixteen 10/100/1000 Mbps copper twisted pair ports. Support for control and management is through web interface, and host processor access through a Command Line Interface (CLI). MicroMax, as a manufacturer of ruggedized industrial computers, takes a customized approach to each client. Our engineering group can design M-Max systems to fit customer-specific technical requirements.
new M-Max 771 PR7/MMS
M-Max 771 PR7/MMS Rugged Industrial Computer with Data Acquisition The M-Max 771 PR7/MMS is a Quad Core rugged industrial computer with data acquisition features for tough environments. The enclosure is designed according to the VITA 75 footprint and can be mounted on different vehicle types. The lightweight compact sealed case with fanless heat dissipation resists contamination and humidity. The system has been certified to comply with MIL-STD-810G and airborne MIL-STD-704F. The system is expandable by one mPCIe module and one PCI/104 Plus board. MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client. Our engineering group can design M-Max systems to fit customer-specific technical requirements.
new M-Max 871 EP4/MMS
M-Max 871 EP4/MMS High performance Rugged Industrial Computer Rugged high performance computer for tough environments. The M-Max 871 EP4/MMS enclosure is designed according to the VITA 75 footprint and can be mounted on different vehicle types. Lightweight compact sealed case with patented fanless heat dissipation resists contamination and humidity. Providing shock and vibration protection, the M-Max 871 EP4/MMS can operate under extreme temperatures (-40 to +60 °C). Computing power is in the high-end desktop class. The embedded power supply complies with MIL-STD-704F specification. MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client. Our engineering group can design M-Max systems to fit customer-specific technical requirements.
new M-Max 400 RC
M-Max 400 RC Relay Systems Interface Unit M-Max 400 RC is a highly reliable compact rugged computer for building all-electric interlocking distributed systems. The system is designed for converting CAN-interface control signals (twisted pair or single-mode fiber) into relay control signals of railroad automation systems. The M-Max 400 RC uses ‘2 out of 2’ architecture for higher reliability of control signals. Two autonomous identical computers inside the M-Max 400 RC are connected by internal interfaces. External relays are connected to control outputs in a way to get an AND circuit in signal control. Each computer has an independent power input and an internal uninterruptible power supply (UPS) based on ultracapacitors, ensuring up to 40 seconds of operation with the input power cut off. Depending on configuration the system allows to maintain 12 or 24 paired relays.
new M-Max 720 PR7
M-Max 720 PR7 Battery Powered Rugged Computer System for Mission-Critical Applications The M-Max 720 PR7 is a high performance battery powered rugged computer system for mission-critical applications. The system is designed to operate in extremely harsh environments and is equipped with: GPS module, 900 MHz Radio modem, 48x Isolated Digital I/O interfaces, four functional LEDs, expanded set of RS-232/485, USB 2.0, VGA and Gigabit Ethernet ports. The computer is based on the ultra-low power 1.46GHz Intel Atom Dual Core E3826 CPU. The system is designed to operate as a standalone computer or together with the M-Max B00 external Rugged Battery unit. The system is built with a 24/28V DC electrical power system with a wide input voltage range from 12V DC to 30V DC. It is resistant to high voltages, spikes, and surges. The system’s LiFePO4-batteries based UPS provides 10 hours of backup power and supports an online connection to an external Rugged Battery unit. The system provides a smooth switch from the internal to the external battery and back when the power is not provided. One external battery unit provides additional 10 hours of operation for the system. MicroMax, as a manufacturer of highly rugged industrial computers, takes a customized approach to each client and can provide even a single system for development and production.
new M-Max V75 chassis
M-Max V75 chassis Rugged VITA 75-compliant Conduction-cooled Enclosure The M-Max V75 chassis, designed according to the VITA 75 footprint, is a fully sealed rugged enclosure with passive cooling, providing reliable operation in tough environments including transportation (ground, rail, air and marine), agriculture, mining and processing. The machine-worked aluminum chassis is especially designed for the most challenging environments. Providing excellent shock and vibration protection, the completely fanless chassis uses natural convection and conduction cooling. Typical systems housed in this VITA 75-compliant enclosure deliver IP66 dust and moisture protection, withstand shocks up to 40g and vibration up to 2.5g. The fully sealed enclosure houses up to two PC/104 or similar-sized boards. The configurable front panel can be outfitted with a variety of customer-defined connectors. The M-Max V75 chassis is tested and guaranteed over temperature range of −40 to +65°C. The embedded power supply complies with MIL-STD-704F specification. MicroMax, as a manufacturer of ruggedized industrial computers, takes a customized approach to each client. Our engineering group can design M-Max systems to fit customer-specific technical requirements.
new M-Max V75 Short chassis
M-Max V75 Short chassis Rugged VITA 75-compliant Conduction-cooled Enclosure Technical specifications Material: Aluminum T6061 Heat dissipation: 14W Cooling system: Natural convection and conduction cooling for inside modules; Natural convection cooling for outside surfaces Capacity: 1 PC/104 or similar board Mechanical (W x H x L): 8 x 1.5 x 7.4 in (203.2 х 38 х 188 mm) Weight (approx.): 1320 g / 2.91 lbs Environmental and physical specifications for typical systems Dust/Moisture: IP66 Operating Temperature: -40 to +70 °C @ 11W Humidity: Operating: 5 to 95 % at +25 °C, non-condensing Vibration Operating acceleration amplitude up to 2.5g Shock: Maximum peak shock acceleration up to 40g
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
CAPTCHA
Loading data...
Subscribe to newsletter
specify your contacts