cPCI-3915
3U cPCI SBC
3U CompactPCI® Intel® Pentium® M Celeron® M Processor SBC with Dual-GbE on PCI-Express®.
cPCI-6965
Value 6U CompactPCI® Intel® Core™2 Duo Processor Blade with Dual Independent Displays
The cPCI-6965 Series is a highly integrated 6U CompactPCI SBC in single slot (4HP) or dual slot (8HP) width form factor. It has been designed to support the Intel® Core™ 2 Duo and Celeron® M processors in 478-pin Micro-FCPGA. The cPCI-6965 is based on the Mobile Intel® GME965 Express chipset which offers outstanding graphics and I/O bandwidth, asset management capabilities, storage speed and reliability.
The cPCI-6965 supports dual-channel non-ECC 533/667 MHz DDR2 memory with a maximum capacity of up to 4GB, 533/800 MHz Front-Side Bus (FSB), and Mobile Intel® Graphics Media Accelerator X3100 (Intel® GMA X3100). The integrated graphics support dual independent displays through two DVI outputs on the front panel.
The cPCI-6965 offers versatile I/O ports such as two Gigabit Ethernet ports, two RS-232/422/485/485+ selectable serial ports, four USB 2.0 ports, PS/2 Keyboard/Mouse, and parallel port on the front panel. Additional I/O can be routed to available Rear Transition Modules (RTM), including USB, VGA, SCSI, Floppy port, Mic-in, Line-out, and SATA. The board also supports one 32-bit/33MHz CompactPCI interface and a PMC expansion slot. Storage features of the cPCI-6965 include a pin header and mounting space for an onboard USB NAND flash module, two Serial ATA interfaces with mounting space for a 2.5” HDD, and CompactFlash socket.
cPCIS-2600
Versatile 3U Platforms with Hot-swappable Fans and Chassis Alarm
The cPCIS-2600 series is designed for demanding applications, where passive backplane PCI systems are unsuited. It is specially designed for sturdy, flexible, and versatile desktop, benchtop or 19" rackmount configuration platform. The base card cage of cPCIS-2600 provides a total 84HP (21-slot) space for 3U form factor CompactPCI or PXI modules. The space can be configured to include a 6.4" TFT LCD display, redundant modular power supply, and front or rear panel I/O access. The built-in chassis alarm module can monitor internal temperature and cooling fans status. It will alert users if the system temperature goes too high or if one fan fails. Front-access hot-swappable fan trays design makes chassis maintenance simpler and easier. The cPCIS-2600 series is the ideal platform for various test and measurement, instrumentation, traffic control, industrial automation, and mission critical applications.
COM Express Type 6 104e
Carrier Board
Connect Tech’s COM Express® Type 6 104e is a compact carrier board which matches the dimensions of a COM Express® Basic module and offers the ultimate durability with rugged, locking pin header connectors.
In addition to the option for multiple video display, on-board DisplayPort/HDMI/DVI switching, USB 3.0, dual GbE and swichable Mini-PCIe / mSATA ports a PCIe/104 Type 2 connector allows for even further 10 expansion. COM Express® Type 6 104e Carrier Board is ideal for space constrained applications, harsh environments, demanding conditions and supports extended temperature ranges of -40°C to +85°C.
BlueStorm/Express
PCI Express
The new BlueStorm/Express family offers reliable, high speed data transfer for your PCI Express system. These x1 lane, standard profile PCI Express serial cards offer two, four, eight or 16 ports of RS-232/422/485 connectivity, compatible with any PCI Express slot. Bidirectional data speeds up to 1.8432 Mbps (RS-422/485) ensure your data acquisition, office automation, POS, self-service kiosk or scientific/instrumentation applications communicate in a reliable, cost-effective manner.
The BlueStorm/Express supports three RS-422/485 modes: full duplex (four wire) with RTS/CTS flow control, half duplex (two wire) with auto TxD echo cancellation, and multi-drop (four wire) communications of multi-drop devices.
Available with optional surge suppression and DB-9 male cables, the BlueStorm/Express is backed by Connect Techs Lifetime Warranty and free technical support.
Titan/cPCI Rear I/O - Rear I/O Opto
CompactPCI
These robust rear panel I/O options for the Titan/cPCI are available in two 3U versions: Rear I/O and Rear I/O Opto. These reliable additions allow the convenience of rear I/O connectivity for your CompactPCI application, while maintaining high performance and reliability.
Titan/cPCI
CompactPCI
Following a tradition of producing cost-effective serial cards while maintaining high performance and quality, Connect Techs Titan offers a number of features on its small, 3U CompactPCI form factor. This flexible adapter board includes 2 or 4 ports of jumper selectable RS-232 or RS-485 configuration, the option for front or rear I/O, and support for all of the most popular operating systems, including Windows XP, Windows 2000 and Windows Server 2003.
BlueStorm/LP RS-485
Universal PCI
The low profile BlueStorm/LP is the perfect fit for your high density chassis or low profile PC. Fully Universal PCI 2.3 compliant, this RS-422/485 adapter can be installed in either a 3.3V or 5V system, and fits into low profile and standard height PCI computers with the change of a bracket. This enables you to connect multiple devices to your system, taking full advantage of the space saving qualities of its MD1 low profile design without sacrificing performance. Data speeds up to 1.8432 Mbps (RS-422/485) ensure your data acquisition, office automation, POS, self-service kiosk or scientific/instrumentation applications communicate in a reliable, cost-effective manner.
The BlueStorm/LP supports three RS-422/485 modes: full duplex (four wire) with RTS/CTS flow control, half duplex (two wire) with auto TxD echo cancellation, and multi-drop (four wire) full duplex communications of multi-drop devices.
Available with surge suppression or without and DB-9 male cables, the boards can be ordered with low profile bracket, standard sized bracket or both for the ultimate flexibility. Like all Connect Tech products, the BlueStorm/LP is backed by our Lifetime Warranty.
The BlueStorm/LP comes in 2, 4 and 8 port RS-422/485 models as well as 1 plus 1, 2 plus 2, and 4 plus 4 RS-232 plus RS-422/485 models.
BlueStorm/LP RS-232
Universal PCI
The low profile BlueStorm/LP is the perfect fit for your high density chassis or low profile PC. Fully Universal PCI 2.3 compliant, this RS-232 adapter can be installed in either a 3.3V or 5V system, and fits into low profile and standard height PCI computers with the change of a bracket. This enables you to connect multiple devices to your system, taking full advantage of the space saving qualities of its MD1 low profile design without sacrificing performance. Data speeds up to 921.6 Kbps ensure your data acquisition, office automation, POS, self-service kiosk or scientific/instrumentation applications communicate in a reliable, cost-effective manner.
Available with surge suppression or without and DB-9 male cables, the PCI serial cards can be ordered with low profile bracket, standard sized bracket or both for the ultimate flexibility. Like all Connect Tech products, the BlueStorm/LP is backed by our Lifetime Warranty.
The BlueStorm/LP comes in 2, 4 and 8 port RS-232 serial interface models as well as 1 plus 1, 2 plus 2, and 4 plus 4 RS-232 plus RS-422/485 serial interface models.
Echo/ISA
Serial Communications Adapter
The Echo/ISA is an 8 port serial card designed for those needing continued support for ISA bus based systems. Multiple Echo boards can reside in a system to accommodate large multi-channel I/O requirements. This flexible solution enables independent configuration of each ports baud rate, parity, data and stop bits, and supports the most popular operating systems.
We recommend
-
New
M-Max SW208
Rugged Gigabit Ethernet Switch
M-Max SW208 is a ruggedized 8-Port Gigabit Ethernet Layer 2+ Managed Switch providing reliable operation in tough environments including transportation (ground, rail, air and marine), agriculture, and mining and processing.
It accepts a wide power supply voltage input, and is tested and guaranteed over temperature range of −40 to +75°C. Its rugged enclosure is designed according to VITA75 footprint.
The SW208 has eight 10/100/1000 Mbps copper twisted pair ports. Support for control and management is through web interface, and host processor access through a Command Line Interface (CLI).
MicroMax, as a manufacturer of ruggedized industrial computers, takes a customized approach to each client. Our engineering group can design M-Max systems to fit customer-specific technical requirements.
-
M-Max 820 EP/USO
Rugged Industrial Error-free Rackmount System
M-Max 820 EP/USO consists of two rugged industrial computers with the highest performance currently available for systems with passive cooling. It is designed to provide reliable operation using ‘2 out of 2’ or redundant architectures in harsh environments for critical applications. The fully-ruggedized rackmount aluminum chassis is fanless and utilizes natural convection and conduction cooling in accordance with MIL-STD-810 standards.
Providing shock and vibration protection, the M-Max 820 EP/USO can operate under extreme temperatures (-40 to +55 °C), dust and humidity. Delivering excellent performance due to Intel Core i7 CPUs (2.1-3.0 GHz), it also features excellent 2D and 3D graphics capabilities via VGA interface. Data storage options include vibration proof industrial SSDs with RAID functionality. The computer is used as a part of a safety system at railroad and operate as an optical time-domain reflectometer.
MicroMax, as a manufacturer of highly rugged industrial computers, takes a customized approach to each client and can provide even a single copy development and production.
-
M-Max 810 EP/MMS
High Performance Rugged ATR-System
M-Max 810 EP/MMS is a rugged industrial computer with the highest performance available at the moment for systems with passive cooling system.
The computer is developed to provide reliable operation in harsh environments for critical applications. The fully-ruggedized ATR-type aluminum chassis is fanless and uses natural convection and conduction cooling in accordance with MIL-STD-810 standards.
This unique fully sealed fanless ATR enclosure is especially designed to house PC/104 form-factor boards. Providing shock and vibration protection, the Max 810 EP/MMS can operate under extreme temperatures (-40..+55 °C), dust, and humidity.
Delivering excellent performance thanks to Intel Core i7 CPU (2.1-3.0 GHz), it also features excellent 2D and 3D graphics capabilities via VGA and HDMI interfaces. Storage system consists of industrial SSDs with RAID functionality.
MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client and is able to develop and produce even one-off systems.
-
New
M-Max SW208
Rugged Gigabit Ethernet Switch
M-Max SW208 is a ruggedized 8-Port Gigabit Ethernet Layer 2+ Managed Switch providing reliable operation in tough environments including transportation (ground, rail, air and marine), agriculture, and mining and processing.
It accepts a wide power supply voltage input, and is tested and guaranteed over temperature range of −40 to +75°C. Its rugged enclosure is designed according to VITA75 footprint.
The SW208 has eight 10/100/1000 Mbps copper twisted pair ports. Support for control and management is through web interface, and host processor access through a Command Line Interface (CLI).
MicroMax, as a manufacturer of ruggedized industrial computers, takes a customized approach to each client. Our engineering group can design M-Max systems to fit customer-specific technical requirements.
-
M-Max 810 EP/MMS
High Performance Rugged ATR-System
M-Max 810 EP/MMS is a rugged industrial computer with the highest performance available at the moment for systems with passive cooling system.
The computer is developed to provide reliable operation in harsh environments for critical applications. The fully-ruggedized ATR-type aluminum chassis is fanless and uses natural convection and conduction cooling in accordance with MIL-STD-810 standards.
This unique fully sealed fanless ATR enclosure is especially designed to house PC/104 form-factor boards. Providing shock and vibration protection, the Max 810 EP/MMS can operate under extreme temperatures (-40..+55 °C), dust, and humidity.
Delivering excellent performance thanks to Intel Core i7 CPU (2.1-3.0 GHz), it also features excellent 2D and 3D graphics capabilities via VGA and HDMI interfaces. Storage system consists of industrial SSDs with RAID functionality.
MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client and is able to develop and produce even one-off systems.
-
New
M-Max SW208
Rugged Gigabit Ethernet Switch
M-Max SW208 is a ruggedized 8-Port Gigabit Ethernet Layer 2+ Managed Switch providing reliable operation in tough environments including transportation (ground, rail, air and marine), agriculture, and mining and processing.
It accepts a wide power supply voltage input, and is tested and guaranteed over temperature range of −40 to +75°C. Its rugged enclosure is designed according to VITA75 footprint.
The SW208 has eight 10/100/1000 Mbps copper twisted pair ports. Support for control and management is through web interface, and host processor access through a Command Line Interface (CLI).
MicroMax, as a manufacturer of ruggedized industrial computers, takes a customized approach to each client. Our engineering group can design M-Max systems to fit customer-specific technical requirements.
