Vendor:Connect Tech’s Xtreme I/O ADC-DAC is an analog and digital peripheral board for the PCI-104 small form factor embedded marketplace. This product is ideal for data acquisition, measurement and control applications.
| Technical specifications | |
|
Analog Inputs |
|
|---|---|
| Channels | 32 Single Ended / 16 Differential |
| Resolution |
DAG003: 16-bit DAG004: 16-bit DAG005: 12-bit (low cost option) |
| Sampling Rate | 100,000 samples per second |
| Calibration | Built in temperature Auto calibration |
| Protection | ±25V |
| Ranges |
Software-Programmable Input Ranges: 0-5V, 0-10V, ±5V, ±10V |
| Accuracy | 1LSB INL and DNL |
| Signal-to-Noise Ratio | 87 dB |
|
Analog Outputs (DAG003 only) |
|
| Channels | 4 |
| Resolution | 16-bit |
| Ranges |
Six Programmable Output Ranges: • Unipolar: 0V to 5V, 0V to 10V • Bipolar: ±5V, ±10V, ±2.5V, –2.5V to 7.5V |
| Accuracy | 1LSB INL and DNL |
| Outputs Drive | ±5mA |
|
Digital I/O |
|
| I/O | 16-bit bidirectional I/O |
| Input/Output Ranges | Hardware selectable +3.3V or +5V(TTL/CMOS) |
| High Current | 24mA |
| Form Factor |
PCI-104 Fully PCI 2.0 bus compliant Jumpers not required for configuration or board detection |
| Dimensions | PC/104 compliant: 95.885mm x 90.17mm (3.775" x 3.550") |
| Operating System | Linux, QNX, Windows |
|
Environmental and physical specifications |
|
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
| Model | Description |
| DAG003 | Xtreme I/O ADC-DAC, Analog Inputs: 16-bit 32 SE / 16 Diff, Analog Outputs: 16-bit 4 Channels, GPIO: 16-bits |
| DAG004 | Xtreme I/O ADC-DAC, Analog Inputs: 16-bit 32 SE / 16 Diff, Analog Outputs: none, GPIO: 16-bits |
| DAG005 | Xtreme I/O ADC-DAC, Analog Inputs: 12-bit 32 SE / 16 Diff, Analog Outputs: none, GPIO: 16-bits |
| CBG001 | 26 pin header to 1 x DB-25 female for GPIO |
| CAG8104 | 40 pin header to 4 x DB-9 Male for ADC |
| CAG104 | 10 pin header to 1 x DB-9 male connector for DAC |
Loading data...