Xtreme I/O Opto
Vendor:Connect Tech
- Details
- Specification
- Order information
- 24 inputs and 24 outputs (optically isolated)
- Optical Isolation: 3kV RMS
- FPGA Register Controlled Device (jumpers are not required)
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
Connect Tech’s Xtreme I/O Opto is a 48-bit isolated PCI‑104 Digital I/O board grouped with 24 optically isolated inputs and 24 optically isolated outputs. The flexibility of the FPGA technology allows integration and customization to meet application requirements.
Fully PCI-104 compliant, Xtreme I/O Opto Digital I/O can be controlled directly from a memory mapped register set in any operating system.
The reliability of the Xtreme I/O Opto, along with the added protection provided by 3kV isolation on the Digital I/O ensures optimal performance and protection under extreme environmental conditions. Xtreme I/O Opto is ideal for PC/104 and other embedded technology applications in the military, aerospace, medical and industrial sectors.
| Technical specifications | |
| Inputs |
24 optically isolated inputs (24-bits) Wide input voltage range from +0 up to +40V DC Independent grounds and reverse voltage protection Selectable interrupt generation on any input signal (change of state, rising or falling edge) 1.8kOhm current limiting series resistor on each input |
| Outputs |
24 optically isolated outputs (24-bits) Wide output voltage range from +0 up to +40V DC Open collector configuration with common emitters Individual selectable output voltage levels with a 4.7kOhm pull up Maximum output current: 8mA |
| Connectors | 2×25 (50 position) 0.1” (DIL) pin headers available in vertical or right angle |
| Optical Isolation | 3kV RMS |
| Control/Addressing |
FPGA Register Controlled Device (No jumpers needed) Custom logic available upon request |
| Dimensions | PC/104 Compliant |
| Bus | ISA (PC/104) connector can be optionally installed as a pass-through connector, PCI-104 (PCI) option |
| Software Compatibility |
Custom CTI Device Drivers for QNX, Linux, Windows Device can also be controlled directly from a memory mapped register set in any operating system |
|
Environmental and physical specifications |
|
|---|---|
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
| Model | Description |
| DAG001 | Xtreme I/O Opto, PCI-104 |
| DAG002 | Xtreme I/O Opto, PC/104-Plus |
