ADLPS104-150
Vendor:ADL Embedded Solutions
- Details
- Specification
- Order information
- PCI/104-Express Form Factor (90mm x 96mm)
- Two Variants Available
- MTBF: 500,000h
- Extended operating temperature: -40°C to +85°C
The ADLPS104-150 power supply board is designed to meet the needs of high-powered Intel® Core™ industrial and embedded motherboards by providing robust ATX voltages (5V, 5VS, 3.3V, 12V) in a stackable PCI/104-Express form factor designed for — 40°C to +85°C operation at 150W. Its small (90mm x 96mm) footprint allows it to fit in many space limited applications. As well, the ADLPS104-150 is tailored to work in conjunction with our ADLQM67PC Sandy Bridge SBC with more than enough headroom for inrush startup currents, and quiescent operation with multiple peripheral cards. Of course, it is also an economical choice for the ADLGS45PC and other lower power platforms.
The ADLPS104-150 features ATX compliant signaling to allow ACPI/APM power management from within compliant operating systems.
The ADLPS104-150 is available in two variants, one allowing an input voltage range of 7-30V but providing only the 5V, 5VS, and 3.3V outputs, the other with a narrower input voltage range of 14-36V but providing 5V, 5VS, 3.3V and 12V outputs.
The board is protected against many types of input power anomalies, such as over-currents, voltage deviations and voltage surge. Short bursts of over-current are simply filtered out. Should overvoltage or under voltage situation persist too long, the power supply shuts off. Noise interference is dampened by up to 35dB. The output is protected against reverse voltage and short-circuit. Additionally, the power supply design does not include the use of electrolytic capacitors, thus dramatically increasing the lifespan of the power supply.
| Technical specifications | |
| Two variants available |
ADLPS104-150-5: Input: 7-30V, Output: 5V, 5VS, 3.3V (optional 7-36V available) ADLPS104-150-12: Input: 14-36V, Output: 5V, 5VS, 3.3V, 12V 36V input voltage option available upon request |
| Voltage and current specifications (common all variants) |
Maximum Input Current = 15A Maximum Power = 150W Combined Available Output Current: 5VS/5A, 5V/20A, 3.3V/5A, 12V/10A |
| Input protection |
Overcurrent Overvoltage / Undervoltage / Surge Reverse voltage |
| Output protection |
Voltage out of range (monitored via PWRGD) Short-circuit |
| ATX compliant signals | ATX compliant signals available (PS-ON, PWRGD etc.) |
| Dimensions | PCI/104-Express form factor (90mm x 96mm) |
| MTBF | 500,000h |
|
Environmental and physical specifications |
|
|---|---|
| Operating temperature |
-25°C to +70°C (standard) -40°C to +85°C (with 293034 heat spreader) |
| EMI | Enhanced EMI circuitry designed for IEC 55022 cl. B Emission and EN 55024 immunity compliance |
| Model | Description |
| ADLPS104-150-5 | ADLPS104-150-5, 5V, 5VS, 3.3V, ET (optional 7-36V available) |
| ADLPS104‑150‑12 | ADLPS104-150-12, 5V, 5VS, 12V, 3,3V |
| ADLPS104‑150‑HSP | ADLPS104-150-HSP Heat spreader for -40°C to +85°C operation; hardware kit included |
| MILCOTS-FILTER | MIL-STD 704/1275/461 Input Filter; 120w max. |
