Back to results...

cExpress-AR

COM Express Compact Size Type 6 Module with AMD Ryzen Embedded V2000 CPU (Zen 2 architecture)
  • Details
  • Specification
  • Order information
  • Up to 8 cores based on AMD Zen 2 architecture
  • Up to 64GB Dual Channel DDR4
  • Improved graphics performance (new Radeon Vega GPU)
  • Extreme Rugged operating temperature: -45°C to +85°C

The cExpress-AR, featuring the new AMD Ryzen V2000 CPU with its high performance integrated Radeon graphics, is the first Type 6 module on the market to support an octa-core (8-core) embedded SoC, with up to 16 threads and an impressive turbo boost up to 4.2 GHz. Compared to earlier embedded quad-core V1000 processors, the additional cores combined with AMD’s Zen 2 architecture result in a more than two-fold performance increase and double the performance-per-watt efficiency.

ADLINK’s cExpress-AR provides standard support for up to 64GB DDR4 in two SO-DIMMs. ECC error correction based on selected SKUs and configurable TDP (down to 10W), while still offering 6 to 8 cores and passive cooling, make it well suited for mission critical application in harsh environments.

With integrated new generation AMD Radeon Vega graphics, the cExpress-AR supports up to four independent 4K displays via DisplayPort, HDMI, DVI and LVDS. The cExpress-AR, offers a range of high speed interfaces, including 2.5GbE Ethernet, 6 PCIe x1 Gen3 and 1 PCIe x8 Gen2 (configurable), and 4x USB 3.2 ports. These features are fully compatible with the COM Express Rev. 3 specification, allowing for existing systems to upgrade and gain in performance without changing the carrier design.

Technical specifications

Core System

CPU New AMD Ryzen Embedded V2000 CPU - 7nm process

AMD V2748 2.9/4.25GHz, 4MB L2, 35-54W (8C/7CU) AMD V2546 3.0/3.95GHz, 3MB L2, 35-54W (6C/6CU) AMD V2718 1.7/4.15GHz, 4MB L2, 10-25W (8C/7CU) AMD V2516 2.1/3.95GHz, 3MB L2, 10-25W (6C/6CU)
Memory Dual channel up to 3200 MT/s ECC/non-ECC DDR4 memory up to 64GB in two SODIMM sockets
ECC, non-ECC support
Embedded BIOS AMI UEFI with CMOS backup in 32 or 16MB SPI BIOS (dual BIOS by build option)
Cache 4MB L2 for V2748/V2718, 3MB L2 for V2546/V2516
Expansion Busses 6 PCIe x1 Gen3: Lanes 0/1/2/3 (configurable to x1, x2, x4) and Lanes 4/5 (x1, x2)

Note: PCIe switch by build option for additional x1 on Lanes 6/7

1 PCIe x8 Gen2: Lanes 16-23 (configurable to 1 x8, 2 x4)
LPC bus, SMBus (system) , I2C (user)
SEMA Board Controller Supports: Voltage/current monitoring, power sequence debug support, AT/ATX mode control, logistics and forensic information, flat panel control, general purpose I2C, watchdog timer, fan control and failsafe BIOS (dual BIOS by build option)
Debug Headers 30-pin multipurpose flat cable connector for use with DB-30 x86 debug module providing BIOS POST code LED, EC access, SPI BIOS flashing, power testpoints, debug LEDs

Video

GPU Feature Support AMD Radeon Vega Graphics, supporting 4 independent and simultaneous display combinations of DisplayPort/HDMI/LVDS, eDP or VGA outputs (4x 4K at DP, eDP)
Hardware encode/decode (including HEVC 10-bit)
DirectX 12 support
OpenGL 4.6 and ES 3.X support
OpenCL 2.1 support
Digital Display Interface DDI1/2/3 supporting DisplayPort 1.4, HDMI 2.1, DVI
DisplayPort 1.4, max. resolution 4096x2160@60Hz
HDMI 2.1, max. resolution 4096x2160 @60Hz
(max. resolution support dependent on carrier)
VGA Supported by build option through DP-to-VGA IC (in place of DDI3)
Max. resolultion 1920x1200 @60Hz
LVDS Single/dual channel 18/24-bit LVDS from eDP-to-LVDS IC
Max. resolution 1920x1200 @60Hz in dual mode
eDP Optional 4 lane eDP1.3 support, in place of LVDS
Max. resolution 4096X2160@60Hz (max. resolution dependent on carrier)

Audio

Chipset AMD Audio coprocessor
Audio Codec On carrier Express-BASE6 (ALC886 standard support)

Ethernet

Intel MAC/PHY Intel Ethernet Controller i225 Series (V/IT versions)
Interface 2.5Gbit/s, 1000/100/10 Mbit/s Ethernet connection

I/O Interfaces and storage

USB 4x USB 3.2/2.0/1.1 (USB 0,1,2,3) and 4x USB 2.0/1.1 (USB 4,5,6,7)
SATA 2x SATA 6Gb/s (SATA 0,1)
Serial 2x UART ports with console redirection
GPIO 4x GPO and 4x GPI from EC (GPI with interrupt TBC)

Note: USB 3.2 Gen2 support dependent on carrier design.
Super I/O Supported on carrier if needed (standard support for W83627DHG-P, other Super I/O support is by project basis)

TPM

Chipset Infineon
Type TPM 2.0 (LPC based, build option)

Power

Standard Input ATX = 12V±5% / 5Vsb ±5% or AT = 12V±5%
Wide Input ATX = 8.5-20 V / 5Vsb ±5% or AT=8.5-20V
Management ACPI 5.0 compliant, Smart Battery support
Power States S0, S3, S4, S5 , S5 ECO mode (Wake on USB S3/S4, WOL S3/S4/S5)
ECO mode Supports deep S5 mode for power saving

Other

Form Factor PICMG COM.0: Rev 3.0 Type 6
Dimension Compact size: 95 mm x 95 mm
Operating Systems Standard Support: Windows 10 IOT Enterprise 64-bit, Windows 10 64-bit, Ubuntu 20.04 (planning)

Environmental and physical specifications

Operating temperature Standard: 0°C to 60°C
Extreme Rugged: -45°C to 85°C (optional, selected SKUs)
Humidity 5-90% RH operating, non-condensing
5-95% RH storage (and operating with conformal coating)
Shock and Vibration IEC 60068-2-64 and IEC-60068-2-27
MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D
HALT Thermal Stress, Vibration Stress, Thermal Shock and Combined Test
Model Description
cExpress‑AR‑V2748 Compact COM Express Type 6 module with New AMD Ryzen V2748 at 2.9/4.15GHz, otca-core processor, Radeon Vega graphics with 7CU
cExpress‑AR‑V2546 Compact COM Express Type 6 module with New AMD Ryzen V2546 at 3.0/3.95GHz, hexa-core processor, Radeon Vega graphics with 6CU
cExpress-AR-V2718 Compact COM Express Type 6 module with New AMD Ryzen V2718 at 1.7/4.15GHz, otca-core processor, Radeon Vega graphics with 7CU
cExpress‑AR‑V2516 Compact COM Express Type 6 module with New AMD Ryzen V2516 at 2.1/3.95GHz, hexa-core processor, Radeon Vega graphics with 6CU
Accessories
HTS-cAR-B Heatspreader for cExpress-AR with threaded standoffs for bottom mounting
HTS-cAR-BT Heatspreader for cExpress-AR with through hole standoffs for top mounting
THS-cAR-B Low profile heatsink for cExpress-AR with threaded standoffs for bottom mounting
THS-cAR-BT Low profile heatsink for cExpress-AR with through hole standoffs for top mounting
THSH-cAR-B High profile heatsink for cExpress-AR with threaded standoffs for bottom mounting
THSF-cAR-B High profile heatsink with fan for cExpress-AR with threaded standoffs for bottom mounting
Login / Registration
укажите почту
введите пароль
Forgot password?
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters