PCI-9111 Series
Vendor:ADLINK Technology Inc.
- Details
- Specification
- Order information
- Supports a 32-bit 5 V PCI bus
- 16-CH single-ended analog inputs
- Up to 100 kS/s sampling rate
- Operating temperature: 0°C to +60°C
ADLINK’s PCI-9111 series are 16-CH, 100 kS/s low-cost multi-function DAQ cards that feature flexible analog input configurations.
An RC filter is implemented on each A/D input channel to allow attenuation or filtering of the input signals.
The PCI-9111 series provide analog inputs with 5 programmable input ranges for bipolar inputs. The PCI-9111 series also support automatic analog input scanning.
The PCI-9111DG provides 12-bit A/D resolution while the PCI-9111HR provides 16-bit A/D resolution. The PCI-9111 series also feature 1-CH 12-bit analog output, 16-CH TTL digital inputs and 16-CH TTL digital outputs.
ADLINK’s PCI-9111 series delivers cost-effective and reliable data acquisition capabilities, and is ideal for a broad variety of applications.
| Technical specifications | |
|
Analog Input |
|
|---|---|
| Number of channels | 16x single-ended |
| Resolution |
12 bits (PCI-9111DG) 16 bits (PCI-9111HR) |
| Conversion time | 8 µs |
| Maximum sampling rate | 100 kS/s |
| Input signal ranges (bipolar, software programmable) |
(Gain 1) ±10 V (Gain 2) ±5 V (Gain 4) ±2.5 V (Gain 8) ±1.25 V (Gain 16) ±0.625 V |
| Accuracy |
(Gain 1, 2) 0.01% of FSR ± 1 LSB (Gain 4, 8) 0.02% of FSR ± 1 LSB (Gain 16) 0.04% of FSR ± 1 LSB |
| Input Coupling | DC |
| Overvoltage protection | Continuous ±35 V |
| Input Impedance | 10 MΩ |
| Trigger modes | software, pacer, and external trigger (5 V/TTL compatible) |
| FIFO buffer size | 1 k samples |
| Data transfers | polling, interrupt |
|
Analog Output |
|
| Number of channels | 1x voltage output |
| Resolution | 12 bits |
| Output ranges (jumper selectable) |
Bipolar: ±10 V Unipolar: 0 to 10 V |
| Output driving capacity | ±5 mA max |
| Settling time | 30 µs |
| Data transfers | programmed I/O |
|
Digital I/O |
|
| Number of channels | 16 inputs and 16 outputs |
| Compatibility | 5 V/TTL |
| Data transfers | programmed I/O |
|
General Specifications |
|
| I/O connector |
37-pin D-sub female 20-pin ribbon male x 2 |
| Power requirements | +5 V, 570 mA typical |
| Dimensions (not including connectors) | 175 mm x 107 mm |
|
Environmental and physical specifications |
|
| Operating temperature | 0˚C to 60˚C |
| Storage temperature | -20˚C to 80˚C |
| Humidity | 5 to 95%, non-condensing |
| Model | Description |
| PCI‑9111DG | 16-CH 12-Bit 100 kS/s Low Cost Multi-Function DAQ Card |
| PCI‑9111HR | 16-CH 16-Bit 100 kS/s Low Cost Multi-Function DAQ Card |
| DIN‑37D‑01 | Terminal Board with One 37-pin D-sub Connector and DIN-Rail Mouting (Cables are not included) |
| ACLD‑9182A‑01 | Terminal board with 16-CH Isolated Digital Inputs (Cables are not included) |
| ACLD‑9185‑01 | Terminal Board with 16-CH Relay Outputs (Cables are not included) |
| DIN‑20P‑01 | Terminal Board with One 20-pin Ribbon Connector and DIN-Rail Mounting (Cables are not included) |
| ACLD‑9137‑01 | General-Purpose Terminal Board with One 37-pin D-sub Male Connector |
