cPCI-3520
Vendor:ADLINK Technology Inc.
- Details
- Specification
- Order information
- 14nm multi-core Intel Xeon E / 9th Gen Intel Core processor
- Dual channel DDR4-2666 soldered SDRAM with ECC, up to 32GB
- Up to three independent displays
- Operating temperature: -40°C to +85°C max.
The ADLINK cPCI-3520 Series is a 3U CompactPCI processor blade with soldered DDR4-2666 ECC memory of up to 32GB. The ADLINK cPCI-3520 features the Intel Xeon E, 8th/9th Gen Intel Core and Intel Celeron G processor (formerly Coffee Lake-H) with Mobile Intel CM246 Chipset. (Supports ECC memory dependent on processor).
The cPCI-3520 Series is a 3U CompactPCI blade available in single-slot (4HP), dual-slot (8HP) or triple-slot (12HP) width form factors with various daughter boards to provide a broad range of I/O requirements. Faceplate I/O in the single-slot (4HP) version includes 1x DVI-I, 2x GbE and 1x USB 3.0 port (these I/O are common to all versions). Faceplate I/O in the dual-slot (8HP) version includes additional 2x USB 2.0, 1x COM, 1x KB/MS and Line-in/Line-out on the cPCI-3520D or additional 2x DisplayPorts, 1x COM in RJ-45 connector, 1x KB/MS and 1x additional USB 2.0 port on the cPCI-3520G. Two more dual-slot options are the cPCI-3520L with additional 2x GbE, 1x COM and 2x USB and the cPCI-3520M with one 100-pin high density connector supporting additional 2x DVI-D, 2x USB 2.0, 2x COM, 2x KB/MS and Line-in/Line-out ports.
Graphics support is integrated on the CPU and allows 3 independent displays on the faceplate by selecting the cPCI-3520G with additional 2x DisplayPorts. Storage includes a CFast slot, mSATA socket or a 32GB onboard SSD and 2.5″ SATA drive on the layer 2 daughter board (cPCI-3520D/L/M/P). One optional PCI 32-bit/66MHz PMC site or PCIe x1 XMC site is available on the 8HP or 12HP versions (cPCI-3520S or cPCI-3520P).
Rear I/O signals to J2 include 4x PCIe x1, 3x SATA 3 Gb/s, and 3x USB 2.0. 3x GPIO and SMBus signals are also routed to the J2 connector. The optional Rear Transition Module (RTM) provides 3x SATA, 2x GbE, 2x USB, 1x COM (Tx/Rx), and 1x VGA port.
The cPCI-3520 is a high-performance solution for factory automation and other industrial applications that require superior data transfer capability and advanced computing power. The ADLINK cPCI-3520 provides high manageability, supports Satellite mode operation as a standalone blade in peripheral slots, and IPMI for Preliminary 2 Introduction system health monitoring. A GbE port on the faceplate supports Intel AMT 9.0 for remote monitoring.
| Technical specifications | |
| CPU |
Intel Xeon E-2276ME 6C/12T, 45W/35W, ECC Intel Xeon E-2276ML 6C/12T, 25W, ECC 9th Gen Intel Core i7-9850HL 6C/12T, 25W 9th Gen Intel Core i7-9850HE 6C/12T, 45W/35W 8th Gen Intel Core i5-8400H 4C/8T, 45W/35W 9th Gen Intel Core i3-9100HL 4C/8T, 25W, ECC |
| Chipset | Intel CM246 Chipset |
| Memory |
Dual channel DDR4-2666 SDRAM soldered, up to 32GB Supports ECC memory (dependent on processor) |
| BIOS | AMI UEFI BIOS, dual 128Mb SPI flash memory |
| BMC | Supports ADLINK SEMA 4.0 |
| CompactPCI Bus |
PCI 32-bit, 33/66 MHz, 3.3V or 5V universal V (I/O) Supports operation in system slot as master or in peripheral slot as stand-alone blade without connectivity to CompactPCI bus (Satellite mode) |
| PICMG Standards |
PICMG 2.0 CompactPCI R3.0 PICMG 2.9 System Management (R1.0) |
| PMC/XMC | Optional PCI 64-bit/66MHz PMC site or PCIe x1 XMC site |
| Ethernet |
One Intel I219LM controller for one Gigabit Ethernet front panel port with three Intel I210IT controllers for one Gigabit Ethernet front panel port and two rear ports Additional two Intel I210IT controllers for two Gigabit Ethernet front panel ports on riser card (cPCI-3520L/cPCI-3520T) |
| Graphics |
Integrated in Intel processor, 3D engine One DVI-I (digital+analog) port on front panel, analog switchable to rear, supports up to QXGA 2048x1536 pixels@75Hz, 32-bits Two DisplayPorts on riser card, support up to 2560×1440 pixels @ 60Hz, DVI, VGA and HDMI interfaces are available by adapter cables (cPCI-3520G only) Three independent displays with different /contents |
| USB |
Single USB 3.0 port on front panel, and up to three USB ports on front panel on selected SKUs Three USB ports to rear, two on RTM panel |
| Audio | Line-in and Line-out ports on front panel (cPCI-3520D only) |
| PS/2 | Keyboard/Mouse on cPCI-3520D and cPCI-3520G |
| Serial Port |
Up to four serial ports One RS-232/422/485 selectable port on front panel (cPCI-3520D/cPCI-3520L/ cPCI-3520T) One RS-232/422/485 10-pin header on riser card (cPCI-3520G only) Two serial ports on rear panel: one with Tx/Rx signal only, one converted from USB signal |
| Blade storage | One SATA direct connector for 2.5” onboard HDD (8HP version only) |
| CFast socket or mSATA socket | Optional onboard 32GB SSD (by replacing CFast adapter board) |
| RTM |
Three 7-pin SATA signal connectors Supports SATA RAID 0/1/5/10 |
| Operating System |
Microsoft Windows 10, 32/64-bit Linux 6.4 Wind River VxWorks 7.0 (support by request) (Please contact us for other OS support) |
| LEDs | Power, WDT, Storage Drive, Overheat, General Purpose |
| Battery | Coin cell lithium battery onboard for RTC CMOS RAM for BIOS configuration |
| Watchdog Timer | System Reset and NMI, with Programmable Interval, 1-65535 sec or 1-65535 minutes |
| Hardware Monitor | Monitors CPU temperature, system temperature and DC voltages by IPMI |
| TPM | Support TPM 2.0 (optional support upon request) |
| Form Factor | 3U 4HP/8HP/12HP CompactPCI blade 100mm x 160mm (L x W) |
| Weight |
Net weight 713.55g (cPCI-3520D with heatsink) Net weight 718.20g (cPCI-3520G with heatsink) |
|
Environmental and physical specifications |
|
|---|---|
| Operating temperature |
-20°C to +70°C -40°C to +85°C |
| Storage temperature | -50°C to +100°C (support on ECC version) |
| Relative Humidity | 95%, non-condensing |
| Shock | 20G peak-to-peak, 11ms duration, operating |
| Vibration | 2Grms random vibration, 5 to 500Hz in 3 axes, operating |
| Certifications | CE/FCC |
| Model | Description |
| cPCI‑3520/2776/M16/S128 | 1-slot (4HP) 3U CompactPCI blade with Intel Xeon E-2276ML processor, 16GB DDR4-2666 ECC soldered memory, DVI, 2x GbE, 1x USB 3.0 and onboard 128GB SSD |
| cPCI‑3520/9850HL/M16/S32 | 1-slot (4HP) 3U CompactPCI blade with Intel Core i7-9850HL processor, 16GB DDR4-2666 soldered memory, DVI, 2x GbE, 1x USB 3.0 and onboard 32GB SSD |
| cPCI‑3520D/9850HL/M16 | 2-slot (8HP) 3U CompactPCI blade with Intel Core i7-9850HL processor, 16GB DDR4-2666 soldered memory, DVI, 2x GbE, 1x USB 3.0, COM, 2x USB 2.0, PS/2 KB/MS, Line-in, Line-out, CFast socket and SATA connector |
| cPCI‑3520G/9850HL/M16 | 2-slot (8HP) 3U CompactPCI blade with Intel Core i7-9850HL processor, 16GB DDR4-2666 soldered memory, DVI, 2x GbE, 1x USB 3.0, RJ-45 COM, 2x DisplayPort, PS/2 KB/MS, 1x USB 2.0, CFast socket and SATA connector |
| cPCI‑3520T/9850HL/M16 (available by request) | 2-slot (8HP) 3U CompadctPCI blade with Intel Core i7-9850HL processor, 16GB DDR4-2666 soldered memory, DVI, 2x GbE, 1x USB 3.0, 2x GbE in RJ-45 and 2x GbE in MIL-STD M12 connectors, COM (RS-232/422/485), CFast socket and SATA space |
| cPCI‑3520L/9850HL/M16 | 2-slot (8HP) 3U CompactPCI blade with Intel Core i7-9850HL processor, 16GB DDR4-2666 soldered memory, DVI, 4x GbE, 1x USB 3.0, 2x USB 2.0, CFast socket and SATA space |
| cPCI‑3520M/9850HL/M16 (available by request) | 2-slot (8HP) 3U CompactPCI blade with Intel Core i7-9850HL processor, 16GB DDR4-2666 soldered memory, 3x DVI, 2x GbE, 1x USB 3.0, 2x USB 2.0, 2x COM, PS/2 KB/MS, Line-in, Lineout, CFast socket and SATA connector |
| cPCI‑3520S/9850HL/M16 | 2-slot (8HP) 3U CompactPCI blade with Intel Core i7-9850HL processor, 16GB DDR4-2666 soldered memory, DVI, 2x GbE, 1x USB 3.0, CFast socket and PMC/XMC connector |
| cPCI‑3520P/9850HL/M16 (available by request) | 3-slot (12HP) 3U CompactPCI blade with Intel Core i7-9850HL processor, 16GB DDR4-2666 soldered memory, DVI, 2x GbE, 1x USB 3.0, COM, 2x USB 2.0, PS/2 KB/MS, Line-in, Lineout, CFast socket, SATA connector and PMC/XMC connector |
| Accessory | |
| SATA drive installation kit | 2.5” SATA drive installation package including bracket, screws |
| Y‑cable for keyboard & mouse | Y-cable for keyboard & mouse and 200mm in cable length |
| DisplayPort to DVI cable | DisplayPort to DVI adapter cable with 150mm cable (one is included in cPCI-3520G package by default) |
| DisplayPort to VGA cable | DisplayPort to VGA adapter cable with 150mm cable |
| DisplayPort to HDMI cable | DisplayPort to HDMI adapter cable with 150mm cable |
| RJ‑45 to DB9 cable | (cPCI-3520G only) RJ-45 to DB9 COM adapter and 200mm in cable length |
| SCSI 100p to IO cable | (cPCI-3520M only and available by request) SCSI 100-pin male to 2 x DVI-D female, 2 x DB9 male, 2 x USB female, 2 x PS/2 female, 2 x audio jack, 150 mm cable Contact us for different CPU, memory, SSD/HDD, CFast and mSATA combinations. |
| Rear I/O | |
| cPCI‑R3P00 | 8 HP Rear I/O module with 2x GbE, 2x COM, 2x USB 2.0, 3x SATA connectors, VGA, 50mm depth |
| cPCI‑R3P00T | 8 HP Rear I/O module with 2x GbE, 2x COM, 2x USB 2.0, 3x SATA connectors, VGA, 80mm depth |
