ND-6013
Vendor:ADLINK Technology Inc.
- Details
- Specification
- Order information
- 2, 3 or 4 wire RTD input support
- Programmable RTD input range
- Internal watchdog timer for device failure protection
- Easy installation, wiring and programming
Adlink’s NuDAM data acquisition modules make up a total acquisition network and control system.
Up to 256 NuDAM modules can be remotely controlled on any RS-485 network from a host computer, via a single serial RS-232, allowing communication from as far as 4000 feet from the host.
Based on the RS-485 multi-drop network system, each module has a unique address ID, whereby simple ASCII command & response protocols through the standard RS-485 interface can control all the NuDAM modules in the RS-485 network.
The NuDAM modules provide direct communications with a wide variety of sensors, perform all signal conditioning, scaling, linearization and conversion, and can acquire measurements of temperature, pressure, flow, voltage, current, and multiple digital signal types.
| Technical specifications | |
|
Interface |
|
|---|---|
| Interface | RS-485, 2 wires |
| Speed (bps) | 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K |
| Isolation Voltage | 2500 Vrms |
|
RTD Input |
|
| Input type | Pt or Ni input, 2, 3 or 4 wires |
| Channels | 3 |
| Resolution | 16 bits |
| Sampling Rate | 10 sample/sec |
| Unit Conversion | °C or Ohm |
| Temperature Range | Programmable 5 levels, ±100°C, 0~100°C, 0~200°C, 0~600°C, 0~60 Ohms |
| Accuracy | ±0.1% |
|
Power |
|
| Power supply | +10V to +30V |
| Power consumption | 0.696 W |
| Model | Description |
| ND‑6013 | 3-CH RTD Input Module |
