MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
EMM-DIO4M-XT
PC/104 4-Port RS-232/422/485 Serial I/O Module with DIO
High Performance Serial I/O Functionality
The Emerald‑MM‑DIO4M‑XT is a PC/104 form factor serial module offering 4 programmable serial ports. The module is based on a ST16C554 quad UART with 16-byte TX/RX FIFOs. Programmable features include serial port protocols, line termination, slew rates, enable / shutdown, base addresses, and interrupt status register address. The EMM-DIO4M-XT fits a wide variety of rugged and on-vehicle embedded serial I/O application needs.
Digital I/O Lines
EMM-DIO4M-XT also offers 48 programmable digital I/O lines. Configurable features include the digital I/O base address, interrupt level, output mode, and voltage level selection. The lines can be set for pull-up / pull-down resistors in two banks of 24 digital I/O lines each.
Rugged Design
The Emerald-MM-DIO4M-XT was designed with harsh applications in mind including latching connectors to further improve reliability. Extended temperature operation of −40°C to +85°C is tested and guaranteed. The module is compatible with MIL-STD-202G shock and vibration specifications.
Key Features
Emerald-MM-DIO4M-XT is a programmable PC/104 serial I/O module offering 4 multiprotocol serial ports and 48 digital I/O lines. The serial ports are based on a ST16C554 quad UART with 16-byte TX/RX FIFOs. Each serial port can be independently configured for RS-232, RS-422, or RS-485 protocols, along with programmable 120-ohm line termination. Other programmable serial port features include slew rate, enable / shutdown and base address. All serial ports also feature +/-15KV ESD protection. The serial ports are brought out in pairs to two pin headers with latching connectors for increased isolation and ruggedness. With its wide operating temperature range and high resistance to shock and vibration, the EMMDIO4M-XT fits a wide variety of rugged and on-vehicle embedded serial I/O application needs. EMM-DIO4M-XT also offers 48 programmable digital I/O lines configured as six 8-bit ports. All ports have individual direction control. Ports 0, 1 and 2 offer programmable edge detection with interrupt capability on change of state. Other programmable DIO features include pull-up / pull-down resistors, base address, interrupt level, output mode, and voltage level.
Software Support
The EMM-DIO4M-XT is compatible with Windows 7/Vista/2000/XP and Linux 2.6. All drivers are shipped with the product.
Janus-MM
Dual CAN Ports, Carrier for Wireless and GPS Modules
JANUS-MM combines dual CAN interfaces with sockets for wireless communications and GPS to create a complete I/O subsystem for automotive and vehicle tracking applications. The dual CAN ports use the Philips SJA1000T CAN controller and 82C251 transceiver, for full CAN2.0B functionality. Each port is independently isolated from the system to eliminate sensitivity to noise and ground shifts in the network. Jumper options include slew rate control, transceiver power source (on-board or loop power), address, and interrupt settings. Both memory and I/O addressing are supported. For ruggedized applications, 0Ω jumper-bypass resistors can be installed in any configuration.
JANUS-MM includes sockets and support circuitry for GSM/GPRS and CDMA wireless communication modules from MultiTech, as well as 8-channel and 12-channel GPS receivers from Trimble Navigation. A connector is provided to supply backup power for the GPS almanac. A built-in dual UART circuit provides the necessary interface to the modules. The add-on modules are available separately based on your desired configuration. See below for information on available modules.
Diamond-MM-XT
12-bit Analog I/O PC/104 Module
Diamond-MM has all the primary features you expect in a high-performance analog I/O board at a reduced price. The analog input circuit uses a 12-bit A/D converte and can be configured for single-ended or differential input wiring, as well as unipolar or bipolar input ranges. It also offers 10 different input ranges, so it can work with a wide variety of input signals. The maximum A/D conversion rate is approximately 2,000-20,000 per second using interrupts (depending on the operating system) or 100,000 per second using DMA.
Two optional analog outputs provide 12-bit resolution over a 0-5V or user-adjustable output range with 8mA drive current and 4uS settling time. The D/A can also be used as a digital attenuator for an analog signal fed into one of the reference inputs.
The board contains 8 digital inputs and 8 digital outputs. It has an on-board 82C54 counter/timer chip to control the A/D sampling rate and provide general purpose counting functions.
Diamond-MM is available in four models: with or without analog outputs, and in commercial (0ºC-70ºC) or industrial (-40ºC to +85ºC) operating temperature range.
Diamond-MM-16-AT
16-channel, 16-bit Analog I/O with Autocalibration
The Diamond-MM-16-AT features top performance and flexibility for a mid-range price. It has 16 single-ended / 8 differential analog inputs with both unipolar and bipolar input ranges and programmable gain. It has a maximum sampling rate of 100KHz, supported by a 512-sample FIFO with a 256-sample threshold for gap-free A/D sampling. Both single-channel and multi-channel scan sampling modes are supported. The A/D can be triggered with a software command, the on-board programmable timer, or an external signal. These feature give you maximum flexibility to configure the board to your application.
COM Express Modules
Low-power, high-performance, wide temperature COM Express computer on modules
These compact, low-power, and powerful COM Express modules are suitable for powering a wide range of embedded applications. Additionally, to support real‑world applications subject to temperature extremes these modules are rated for operation over enhanced (-20 to +71 °C) and extended (-40 to +85 °C) temperature ranges.
Each Diamond COM Express module integrates a complete set of PC-compatible functions, including a low-power, high-performance Intel processor and from 1GB to 4GB of soldered-on or SO-DIMM system memory. In addition, the modules provides interface controllers for high-resolution displays, gigabit Ethernet, and SATA storage devices, as well as multiple USB 2.0, parallel, digital I/O, and audio ports.
By plugging these powerful, plug-and-play COMs into standard or custom application baseboards, OEMs can reduce development costs, minimize design risks, and shorten time-to-revenue while benefiting from the latest embedded technologies.
Aurora
1.6GHz Atom Z530P PC/104 Single Board Computer
Aurora is a rugged, single board computer (SBC) based on the 1.6GHz Intel Atom Z530P CPU and conforming to the compact, PC/104-sized, SUMIT-ISM form-factor.
The SBC supports up to 2GB of DDR2 SO-DIMM SDRAM and provides high-resolution LVDS and SDVO graphics interfaces. Additional I/O ports include SATA, USB, serial, digital I/O, and Gigabit Ethernet. Flexible system expansion is based on industry-standard, stackable PC/104 (ISA) and SUMIT-A (PCIe) modules. A location is also provided for an optional on-board USB flashdisk.
Aurora's power-efficient design leverages Intel's ultra-low-power (Menlow) silicon platform, consisting of the Atom Z5xx (Silverthorne) processors and US15W chipset (Poulsbo). These ICs are positioned on the bottom of the board, resulting in easy and efficient heat removal via a heatspreader for wide-temperature, fanless operation.
Aurora is compatible with Linux, Windows XP, Windows Embedded Standard, Windows Embedded CE, and QNX. All necessary drivers are provided with the product.
Ruby-MM-416
4 Channel 16-bit Analog Output+24 DIO PC/104 Module
The new Ruby-MM-416 PC/104 module provides 4 channels of 16-bit resolution analog voltage output. The output range for each channel can be independently selected for 0-10V, ±5V, or ±10V with jumpers. All outputs are updated simultaneously, either with a software command or in response to an external signal. The board includes 24 lines of digital I/O using an 82C55 chip. The I/O connector pinout is compatible with the Ruby-MM-4 12-bit analog output board shown in our catalog on pages 20-21. Other features include +5V-only operation, individual DC/DC converters with filtered outputs for each DAC to supply ±15V for operation, and a six-layer circuit board to bury and shield the analog signals.
Ruby-MM-412/812/1612
4, 8, or 16-Channel 12-bit Analog Output‑PC/104 Module
The Ruby-MM series provides 4, 8 or 16 channels of 12-bit resolution analog voltage outputs plus 24 digital I/O lines on a single PC/104 module. An on-board precision voltage reference circuit offers analog output ranges of 0-2.5V, 0-5V, and 0-10V in unipolar mode or ±2.5V, ±5V, and ±10V in bipolar mode. All analog outputs can source or sink up to 5mA simultaneously.
The analog outputs are based on the DAC8412 quad 12-bit D/A converter chip. This chip resets all outputs to mid-scale on power-up, meaning 0V for bipolar ranges and 1/2 the full-scale voltage for unipolar ranges. To obtain power-on reset to 0V for unipolar ranges, a special-order version is available using the DAC8413 which powers up to zero scale instead.
On the 16-channel model, each group of 8 channels can be set for a different output range. On the 4- and 8-channel models, all outputs have the same output range. All outputs are updated simultaneously, either with a software command or in response to an external trigger.
The board includes 24 digital I/O lines using an 82C55 chip. All I/O lines have 10K Ohm pull-up resistors for guaranteed logic levels on power-up.
Ruby-MM-1612 is designed and tested for extended temperature operation (-40 to +85oC). It requires only +5VDC from the system power supply via the PC/104 bus. Analog ±15V supplies are derived from miniature DC/DC converters on the board. All I/O is contained on a single 50-pin connector compatible with standard .1” connector ribbon cables, such as Diamond Systems’ C-50-18.
IMB-M43-C236
Industrial ATX Motherboard with Intel Core i7/i5/i3 and Xeon E3 Processors
The IMB-M43-C236 is ADLINK’s ATX industrial motherboard, supporting the 6th/7th Generation Intel Core and Xeon E3-1200 v5/v6 processor in the LGA1151 package, and the Intel C236 Express chipset, the IMB-M43-C236 supports such high-speed data transfer interfaces as PCIe3.0, USB 3.0 and SATA 6 Gb/s (SATA III), with dual-channel DDR4 2133/2400 MHz ECC or non-ECC memory up to 64 GB in four DIMM slots.
Delivering a scalable high performance platform for machine automation systems, machine vision systems, and testing & measurement applications, the IMB-M43-C236 enables intelligent selection of expansion interfaces from among 4xPCIe 3.0×4 lanes plus one 1xPCIe 3.0×8 lane, 2xPCIe 3.0×4 lanes plus 2xPCIe 3.0×8 lanes, or 2xPCIe 3.0×4 lanes plus 1xPCIe 3.0×16 lane.
Additionally, singularly robust I/O configuration enhances high speed data connection reliability via USB3.0, LAN and SATA, for maximum performance and compatibility.
EGX-MXM-P2000
Embedded MXM GPU Module with NVIDIA Quadro Embedded P2000
The EGX-MXM-P2000 features advanced NVIDIA Quadro GPU with NVIDIA Pascal Architecture technology in MXM 3.1 Type A form factor. The EGX-MXM-P1000 has 768 NVIDIA CUDA cores and a peak single-precision floating-point performance of 2.3 TFLOPS.
The EGX-MXM-P2000 has 4GB of GDDR5 memory and supports NVIDIA GPUDirect RDMA which helps increase data throughput by up to 80% and consequently system responsiveness by up to 60%.
Additionally, 4 UHD display outputs and an extended operating temperature range of −40°C to 85°C are supported.
The embedded graphics product is suitable for mission-critical harsh-environment edge computing applications with size, weight, and power (SWaP) and network connectivity constraints.
