new M-Max Platforms Roadmap
M-Max Platforms Roadmap M-Max Family Of Rugged Platforms The platform is not a standard model of a computer, a system can be ordered based on a certain platform with a certain amount of I/O ports that does not exceed the highest number available. M-Max Family Of Computers Built To Work Under Extreme Conditions: Low and high temperature range (From −40 to +75 °C) Protected from dirt, dust and moisture (up to IP66) Vibration and Shock (6g/ 40g) Major Features: Exceptional reliability due to absence of moving parts (Up to15years of service) Very high availability— frequency of required system maintenance is over 7 years Passive cooling system, no outside air intake Custom built systems Two levels of shock and vibration isolation M-Max Systems are built with our patented technology to dissipate excessive heat from computer boards and other electronic devices working in high vibration environments. This patented design enables the removal of heat from electronic components housed on a circuit board vibroinsulated from an enclosure. What is The M-Max Platform? PLATFORM is a base model with a set of basic features. Basic Features: Performance of CPU and GRU cores Type and available range of RAM (min / max) Type and size ofavailable storage (min / max) Types and number of available I/O ports (min) Resilience to external factors ( min / max) Power Consumption (min) Platform — Product Project Flow:
new MM-TBL-10K
MM-TBL-10K Rugged Vehicle Tablet MM-TBL-10K is a rugged and reliable vehicle tablet, widely used in transportation (ground, rail, air and marine), agriculture, mining and other industrial applications. The open-source software platform allows customization of the user’s Android-based applications to run them on MM-TBL-10K. The tablet will enable your employees to operate more efficiently and effectively. Hardware, software and device interfaces can be customized according to user requirements. Optional docking station enables mounting where convenient — especially useful for transport applications.
new M-Max 400 USO-U
M-Max 400 USO-U Rugged Industrial Error-Free Computer System for Railroad Applications M-Max 400 USO-U is a compact, highly reliable rugged computer system for onboard and stationary applications. It is a revision of our M-Max 400 ST/USO system, which has proved extremely successful at stationary objects of railway infrastructure. The system is built in full compliance with CENELEC SIL4 specifications and provides error-free data processing for railroad signaling systems. M Max 400 USO-U consists of two independent units that repeatedly synchronize / swap data and perform a series of cross-checks. Both subsystems of the M-Max 400 USO-U are separated into two independent units combined in a frame for 19″ rack mounting. Each unit has its own SBC, 128 GB industrial grade SSD, and capacitive energy storage, providing up to 4 seconds of uptime in case of power loss. Watchdog timer has been added to the power supply. To increase maintenance abilities, the system was modified to enable replacement of the RTC batteries and data storage without removal of the entire frame from the rack.
new M-Max HR 1U GX
M-Max HR 1U GX Rugged 19/2” Rackmount Conduction-Cooled Low-Cost Computer System The M-Max HR 1U GX is a high-performance compact rugged low-cost computer based on Intel Celeron CPU. The computer expands our M-Max HR 1U Systems Family. The fully-ruggedized fanless 19/2"-type aluminum chassis uses natural convection and conduction cooling to comply with MIL-STD-810 standards. The versatile mechanical design of the enclosure allows combining several systems into one assembly either side by side or by stacking, as well as mounting on a flat surface or into a 19″ rack. COTS technology components allow configuring the system to comply with a wide variety of airborne, marine and ground vehicle applications.
new M-Max HR 1U DT
M-Max HR 1U DT Rugged 19/2” Conduction-Cooled System The M-Max HR 1U DT is a high-performance compact rugged computer based on Intel's Dual Core i7 CPU. The fully-ruggedized fanless 19/2"-type aluminum chassis uses natural convection and conduction cooling to comply with MIL-STD-810 standards. The versatile mechanical design of the enclosure allows combining several systems into one assembly either side by side or by stacking, as well as mounting on a flat surface or into a 19″ rack. COTS technology components allow configuring the system to comply with a wide variety of airborne, marine and ground vehicle applications. The M-Max HR 1U DT is based on our M-Max HR 1U Systems Family. The system was previously known as M-Max 851 DT.
M-Max HR 3U
M-Max HR 3U Rugged 19/2” Conduction-Cooled Systems Family The M-Max HR 3U rugged industrial system provides reliable operation in tough environments. The fully-ruggedized 19/2"-type aluminum chassis is fanless and uses natural convection and conduction cooling to comply with MIL-STD-810 standards. Versatile mechanical design of the enclosure allows to combine several systems into one assembly side by side or by stacking, mount them on a flat surface or into a 19″ rack using appropriate mounting parts. COTS technology components allow configuring the system to comply with a wide variety of airborne, marine and ground vehicle applications. The M-Max HR 3U system is compatible with the following M-Max platforms: GX Platform, PR7 Platform, AR Platform, DT Platform, EP4 Platform, CU Platform.
M-Max ATR
M-Max ATR Rugged ATR Conduction-Cooled Systems Family The M-Max ATR is an ATR-compliant family of fully sealed rugged systems with passive cooling, providing extreme physical protection for high performance applications. The machine-worked aluminum chassis is especially designed for the most challenging environments. Providing excellent shock and vibration protection, the completely fanless chassis uses natural convection and conduction cooling. The fully sealed 1/2 ATR Short version enclosure houses up to 8 PC/104 or similar-sized boards. The configurable front panel can be outfitted with a variety of customer-defined connectors. The M-Max ATR system is compatible with the following M-Max platforms: PR7 Platform, AR Platform, DT Platform, EP4 Platform, CU Platform.
M-Max PD 7
M-Max PD 7 Rugged Pandora-based Conduction-Cooled Systems Family The M-Max PD 7 is a compact lightweight rugged system in which the number of internal cables is reduced to the minimum. The use of this approach considerably speeds up the assembly process and improves reliability and ruggedness because most or all internal cables can be eliminated. The entire stack doesn’t require any special corner mounts or guides and is bolted directly to the front plate of the case, forming a rugged, easily-handled assembly. One end cap of the M-Max PD 7 system serves as a base plate for the PC/104 stack with the panel I/O board on the top of the stack. Once the stack is complete, it is inserted into the enclosure and bolted into place directly to both the top and the bottom of the enclosure via convenient mounting holes for extra rigidity. The M-Max PD 7 system is compatible with PR7 Platform
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters