MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
MZ104-EV
PC/104 Low Cost CPU Board with ZFx86
The MZ104-EV embedded control module incorporates the revolutionary ZFx86 “PC-on-a-chip” processor with a 10/100Base-T Ethernet and a CRT/LCD Video Controller. The MZ104-EV offers the quickest route to integrating a full x86 AT-compatible computer into your embedded control application, using the PC/104 form factor. The MZ104-EV is fully compatible with all standard PC Software, and will run any standard operating system capable of running on a fully compatible PC with FPU, such as Linux, MS & DR-DOS, WinCE, Windows 9x/ME/NT/2000, and many others.
MZ104
100Mhz PC/104 Module
The MZ104 is a PC/104 compliant system controller measuring just 3.55 inches by 3.775 inches. The MZ104 offers the quickest route of integrating a full x86 AT-compatible computer into your embedded control application using the PC/104 form factor. In addition, the built-in peripherals minimize the number of additional modules required. By combining the system hardware, I/O, software (integrated RTOS image) and solid-state mass storage, the MZ104 lowers your exposure to possible development risks, costs and significantly reduces your time-to-market. The MZ104’s full compatibility with the popular PC/104 embedded expansion bus, which allows you to easily integrate the widest selection of low-cost hardware peripherals. The numerous features provide an ideal price/performance solution.
ETX-GX2
ETX module
ETX-GX2 is an RoHS compliant ETX module specially designed to facilitate speedy development of semi custom designs. The ETX-GX2 core consists of an AMD Geode GX2 processor and AMD Geode CS5535 companion device. The GX2 CPU onboard is available in two version : as a Geode GX533@1.1W or as a Geode GX466@0.9W The ETX-GX2 supports DDR based SODIMMs. Memory can be soldered on board as either 128MB or 256MB, and/or can be inserted in the onboard 200-pin SODIMM socket that accept up to 512 MB DDR SODIMMs. The ETX-GX2 incorporates a VGA controller, an single channel EIDE controller supporting both PIO and UDMA modes, 4 USB ports, two serial ports, one parallel port (SPP/ECP/EPP) shared with FDD, one PS2 keyboard/mouse interface. Additionally onboard are an 10/100Base-T Ethernet port, watchdog timer, an AC97 Audio Codec and support for LVDS based Flat Panel displays.
Pyxis-MM
Pyxis-MM GPS Receiver and Modem Carrier Board
Pyxis-MM enables you to install a Trimble Navigation GPS receiver module and the SocketModem family of embeddable modem modules from MultiTech Systems onto a PC/104 system. Use it to provide location identification and communications features for vehicle-based embedded systems such as vehicle tracking, navigation, or precision farming. Or use it to communicate via land-line telephone connection to remote equipment such as weather stations or oil & gas wells.
You can install a GPS receiver module alone, any one SocketModem module alone, or a GPS receiver plus a modem module. Pyxis-MM includes all the necessary I/O circuitry to interface the selected modules onto the PC/104 bus, including serial ports, power supplies, and land-line telephone interface. A backup power connector is provided to maintain GPS almanac and minimize time to first fix. The board runs on +5V and operates over -40 to +85oC.
Pearl-MM
Relay Output PC/104 Module
Pearl-MM is a PC/104 format industrial control module with 16 relays. The relays have PDT (form C) configuration. Each relay has 3 contacts: Common, Normally Open, and Normally Closed. For safety and reliability, all relays are in their power-off state (Common connected to Normally Closed) at power-up or system reset. The relays can switch both AC and DC voltages. They feature long life (100,000,000 operations), quick actuation time (4ms max operate and release), and isolation (500V AC or DC).
Diamond-MM-32-AT
16-bit Analog I/O PC/104 Module With Autocalibration
After reading about our new Diamond-MM-32 board, we think you will be convinced: There is simply no other board in the world that can compare with these features at any price. And that does not mean that this board is expensive. On the contrary, we have priced Diamond-MM-32 to compete with the standard 16-bit A/D boards that you will find from our competitors around the world. Take a look at the performance and features described below and see for yourself. Diamond-MM-32 is the first PC/104 analog I/O board to feature automatic calibration of both analog inputs and outputs for enhanced accuracy and reliability. The potentiometers, which are subject to tampering and vibration, have been eliminated. Instead, all A/D calibration adjustments are performed using an octal 8-bit DAC. The DAC values are stored in an EEPROM and are recalled automatically on power up. The board includes three precision voltage references for negative full scale, zero, and positive full-scale. A calibration utility program provided with the board allows you to recalibrate the board anytime, in both unipolar and bipolar modes, and store the new settings in EEPROM. Autocalibration applies to the 4 D/A channels as well. The full-scale D/A range is selected with a jumper block. The analog outputs are fed back to the A/D converter so they can be calibrated without user intervention. Again, calibration settings are stored in EEPROM and automatically recalled on power-up.
Diamond-MM-48-AT
Autocalibrating 16-ch 16-bit A/D + 8-ch 12-bit D/A Ext Temp
Diamond-MM-48-AT is the newest in Diamond Systems’ popular AT series of PC/104 autocalibrating analog I/O boards. It combines the features of two different I/O boards into a single board to reduce the size and weight of your PC/104 stack: The analog I/O features are similar to our DMM-16-AT board: 16 analog inputs with 16-bit A/D, 8 analog outputs with 12-bit D/A, and on-board counter/timer for A/D sample rate and interrupt control. The digital I/O features are similar to our Opal-MM board: 8 relays with SPDT (form C) contacts and 4 optocouplers with up to 28V AC/DC input capability. The optocouplers feature an interrupt on edge detection feature for safety applications. An additional 4 TTL level digital I/O lines are also provided on the board, and these lines also feature interrupt on edge detection capability. Diamond-MM-48-AT is designed for rugged environments. It uses latching I/O connectors, and all jumpers can be bypassed with the installation of 0-ohm resistors to provide a vibration-proof fixed configuration. In addition the board is tested and guaranteed to operate reliably over the industrial temperature range of -40 to +85oC.
HE-HP2
100 Watt High Efficiency
100 Watt capability on the +5V output Secondary input Combine with the HESC-SERD, BAT-NiMh2-RTC & BAT-NiMh2 to provide 160 Watts output and full power management with RTC support Extended temperature: -40°C to +85°C
HE104-HP-16
75Watt High Efficiency Power Supply
75W output 6V to 40V DC input range PC/104 compliant 5V, 12V, -12V -40°C to 85°C operation
HE104-DX-SIO
High Efficiency 60 Watt PC/104 Power Supply with Super I/O
60 Watt power supply 6V to 40V DC input range +5V, +12V, -5V and -12V DC output Super I/O chip includes two asynchronous serial ports and one standard parallel port Highly Compact PC/104 compliant Extended temperature: -40°C to 85°C operation
