MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
USBcan II
CAN/USB interface with one or two channels
The Kvaser USBcan II provides a dual channel CAN bus interface through a standard USB interface.
The USBcan II can be ordered with two high-speed channels, with one high-speed and one low-speed or with one-high speed and one single-wire CAN.
Kvaser USBcan II is a flexible way of communicate with the CAN bus through a desktop PC or laptop.
The USBcan II device is a USB 1.1 device. It also works with USB 2.0 in full-speed mode, i.e. 12 Mbit/s.
It contains the powerful M16C microcontroller from Mitsubishi with two built-in CAN controllers.
It handles CAN messages with 11 bit (CAN 2.0A) as well as 29 bit (CAN 2.0B) identifiers.
Remote frames can be sent and received without restrictions.
USBcan II can detect and generate error frames on the CAN bus.
Available models:
USBcan II HS/LS
USBcan II HS/SWC
Leaf SemiPro HS
CAN-USB interface
Kvaser Leaf SemiPro HS is a one channel USB interface for High Speed CAN (ISO 11898-2). It offers the possibility to easily connect several interfaces to a PC. The time stamping is synchronized through Kvaser MagiSync™, providing flexibility and making it perfect for multi-channel applications. Includes Galvanic Isolation for protection against voltage spikes.
Major Features:
Automatic and accurate clock synchronization between several Kvaser Leaf SemiPro interfaces through Kvaser MagiSync™. The technical solution is unique and patented by Kvaser.
Handles up to 15,000 messages per second, time-stamped and synchronized with a precision of 25 microsecond.
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
Reliable error handling.
Supports silent mode for analyzing tools.
Low power consumption.
Excellent EMC performance.
Galvanic isolation of the CAN bus driver stage to protect the hardware.
Labeled CAN channel for easy identification of the supported physical layer.
Equipped with a 110 cm (44 in.) long USB cable and a 30 cm (12 in.) long CAN cable.
Interfaces the CAN bus with a 9-pin D-SUB connector.
Designed for USB 2.0, backward compliant with USB 1.1.
Support for SocketCAN, see elinux.org for details.
Quick and easy Plug-and-Play installation.
A practically unlimited number of Kvaser Leafs can be connected via standard USB hubs for simultaneous use on a single PC.
Software:
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types
J2534 Application Programming Interface available
RP1210A Application Programming Interface available
On-line documentation in Windows HTML-Help and Adobe Acrobat format
USBcan Professional
CAN/USB interface with two channels
The Kvaser USBcan Professional provides two CAN bus interfaces through a single USB connection. When combined with the Kvaser Linx the Kvaser USBcan Professional also supports bus types like J1587.
The Kvaser USBcan Professional supports Kvasers MagiSync technology to synchronize time stamps across multiple units without extra wires providing flexibility for multi-channel applications. With quick reaction times and high data throughput, the Kvaser USBcan Professional is perfect for rapid ECU re-flashing, advanced bus analyzers, and efficient development work.
Major features of Kvaser USBcan Professional
* One device for desktop and laptop.
* Quick and easy plug-and-play installation.
* Automatic and accurate clock synchronization between several Kvaser USBcan Professional interfaces through Kvaser MagiSync. The technical solution is unique and patented by Kvaser.
* Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
* Support for Kvaser Linx J1587.
* CAN Messages are time-stamped and synchronized with a precision of 2 microseconds.
* Large on-board RAM buffer for CAN message.
* Handles up to 40 000 messages per second.
* Excellent error handling.
* Supports silent mode for analyzing tools.
* Galvanic isolation of the CAN bus driver stage to protect the hardware.
* Labeled CAN channel for easy identification of the supported physical layer.
* 100% compatible with applications written for all Kvaser hardware with KVASERs CANlib.
* Interfaces the CAN bus with 9-pin D-SUB connectors or RJ45 connectors.
* Designed for USB 2.0, backward compliant with USB 1.1.
* A practically unlimited number of Kvaser USBcan Professional devices can be connected via standard USB hubs for simultaneous use on a single PC.
* Driver support for major operating systems.
* 100% compatible with applications written for Leaf, LAPcan, PCIcan, andPCcan with KVASERs CANlib.
* Two high-speed channels with ISO 11898-2 compliant CAN transceivers, 10 kbit/s up to 1 Mbit/s.
* Plastic housing with dimension W*L*H about 50*90*25 mm (approx 2 x 3,5 x 1 inch)
Available models:
USBcan Professional
USBcan Professional RJ45
Leaf Professional
USB/CAN interface with extreme performance
Kvaser Leaf Professional with MagiSync is a one channel USB interface for CAN and LIN. It offers the possibility to easily connect several interfaces to a PC. The time stamping is synchronized through Kvaser MagiSync. Providing flexibility and making it perfect for multi-channel applications. High-Speed, Low-Speed and Single-Wire CAN and LIN are supported through different product versions.
Major features
* Automatic and accurate clock synchronization between several Kvaser Leaf Professional interfaces through Kvaser MagiSync. The technical solution is unique and patented by Kvaser.
* Messages are time-stamped and synchronized with a precision of 1 microsecond.
* Handles up to 20 000 messages per second.
* Auto transmit buffers, to send messages on a defined interval.
* Auto response buffers, to send messages on a defined event.
* Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
* Excellent error handling.
* Supports silent mode for analyzing tools.
* Low power consumption.
* Excellent EMC performance.
* Polyurethane cabling for extreme environments.
* Galvanic isolation of the CAN bus driver stage to protect the hardware.
* Labeled CAN channel for easy identification of the supported physical layer.
* 100% compatible with applications written for all Kvaser hardware with KVASERs CANlib.
* Equipped with a 110 cm (44 in.) long USB cable and a 30 cm (12 in.) long CAN cable.
* Interfaces the CAN bus with a 9-pin D-SUB connector or OBD2 connector.
* Designed for USB 2.0, backward compliant with USB 1.1.
* Quick and easy Plug-and-Play installation.
* A practically unlimited number of Kvaser Leafs can be connected via standard USB hubs for simultaneous use on a single PC.
* Please note that not all applications listed under Application Support for Kvaser Leaf Professional, support the Kvaser Leaf Professional LIN product version.
Available models:
Leaf Professional LS
Leaf Professional SWC
Leaf Professional LIN
PCIEcan 2xHS v2
High speed CAN network card with 2 high speed CAN channels
Kvaser PCIEcan 2xHS v2 is a highly integrated, high speed controller area network (CAN) network card that adds two high speed (ISO 11898-2 compliant) CAN channels to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and lower profile than the Kvaser PCIEcan 2xHS and includes a DS9 to 2xDS9 splitter cable.
Offering silent mode, error frame detection/generation and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.
PCIEcan 4xHS
High speed CAN network card with 4 high speed CAN channels
Kvaser PCIEcan 4xHS is a highly integrated, high speed CAN network card that adds four high speed controller area network (CAN) channels to any standard computer board with PCI Express capability. Offering silent mode, error frame detection and an on-board buffer, this small form factor add-on board fits many embedded data acquisition systems and is CAN-FD ready.
Features:
CAN FD ready
Quick and easy plug-and-play installation
Supports High Speed CAN (ISO 11898-2)
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
Low profile card (86×69mm) allows ultra-compact systems
Implements Kvaser's CAN IP in an FPGA, resulting in high max message rate
Four CAN Hi-Speed channels in a single 26-pin HDD-SUB CAN connector
The HD26 splitter connects tothe CAN bus via four 9-pin DSUB connectors
Four yellow LEDs that indicate when a CAN message was received orsent
Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet
Supports silent mode for analysis tools listens to the bus without interfering
Detection and generation of error frames and remote frames
Designed for standard and industrial computers
Galvanically isolated CAN bus drivers
Wide operating temperature of 0°C to +85°C
Supports the Kvaser Linx
Software:
Documentation, software and drivers can bedownloaded for free atwww.kvaser.com/downloads
Kvaser CANLIB SDK isafree resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic
All Kvaser CAN interface boards share acommon software API. Programs written for one interface type will run without modifications onthe other interface types!
J2534 Application Programming Interface available
RP1210A Application Programming Interface available
On-line documentation in Windows HTML-Help and Adobe Acrobat format
Kvaser OBD II Adapter Cable
Interface accessory
A Kvaser OBD II Adapter Cable connects any Kvaser CAN bus interface with a 9 Pin DSUB connector to a vehicle with an OBD II (J1962) connector.
ICOP-2811
PC/104 VGA/LCD Module
The TP6508IQ is an advanced single-chip flat panel VGA controller. It’s used for small-size computer or notebook computer system with simple operation and powerful features. Also it contains all of the functions and supports logic required to implement the IBM VGA display standards and enhanced display modes on LCD, PLASMA, EL panel and TV display at register and BIOS level compatible.
A simultaneous display technology is implemented in TP6508IQ to be used for CRT/Flat panel, LCD/TV display. For minimum chip-count or board-space, it can design to complete a video subsystem with only one 256kx16 DRAM (512k Bytes). This video subsystem can support all panel type without any glue logic or external frame buffer.
AIM104-IN16
PC/104 16-channels Opto-Isolated Digital Input PC104 Module
The AIM104-IN16 is an 8-bit PC/104 module providing 16 opto-isolated inputs. The isolated supply may be sourced from either the on-board DC/DC converter or an external supply, so that there are two variants: the AIM104-IN16 and the AIM104-IN16-DC/DC. The board includes jumper options for each channel.
Valentino
Multi-channel Video Output Board Line
The Valentino Multi-Channel Video Output Boards output 2, 4 or 8 (depending the model) independent video output channels for analog PAL or NTSC video formats. Each video output channel is set to one of five video output modes (Composite, S-Video or Component [RGB/YUV] video) in software. To avoid PCI-bus load, the board is equiped with full frame video memories for each video output channel, that keep the latest refreshed image stored. TM The valentino boards are designed for the standard PCI-bus (32bit/33MHz). All video outputs are available by a standard HD 62-pins connector on the board bracket. Multiple "Multi-channel Video Output Boards" in one PC-system are allowed to extend the total number of video output channels for the computer system (256 boards theoretically). TM Each valentino board adds maximum 8 video output channels to the system. TM R R The valentino line is supported for Windows , Linux and QNX . For software developers open source application sample code is provided.
