MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
PCIe-7360
100 MHz 32-CH High-Speed Digital I/O Card
ADLINK’s PCIe-7360 is a high-speed digital I/O board with 32-CH bi-directional parallel I/O lines. Data rate up to 400 MB/s is available through the x4 PCI Express interface. Clock rate can support up to 100 MHz internal clock or 200 MHz external clock, ideally suiting applications of high-speed and large-scale digital data acquisition or exchange, such as digital image capture, video playback and IC testing.
I/O Port Configuration & Level Shifting
The PCIe-7360, in initial power-up status for onboard 32-channel I/O lines is input lines. The 32-channel I/O lines are bidirectional and can be divided into four groups, each carrying 8 channels and individually configurable as an input or output port. The PCIe-7360 also supports software selectable logic levels of 1.8 V, 2.5 V, and 3.3 V, with all four groups matching the chosen logic level. In digital output mode, the outputs are tri-stated when the digital output lines are disabled. The programmable I/O direction and logic levels provide a flexible interface for devices under test (DUT).
Maximum Data Transfer Rate
The PCIe-7360 can support up to 400 MB/s throughput along with a 32-bit data width at a maximum 100 MHz internal clock rate or 8/16-bit data width at a maximum 200 MHz external clock rate. The combination scatter-gather bus mastering DMA, deep onboard 8 k-sample FIFO size, and x4 PCI Express interface guarantee no data loss during sustained high-speed data processing.
Phase Delay
The PCIe-7360 features phase shifting of external sample clock or internal sample clock exporting, optimizing acquisition/generation timing in high-speed data transfer applications. The phase shifting of sample clock supports adjustment up to 80 steps, that is phase shifting from 4.5¢X to 355.5¢X, preventing erroneous sampling during transition states, such that sample timing is valid and stable.
12C & SPI Serial Interfaces
PCIe-7360’s application function I/O (AFI) can be configured as a I2C or SPI master node. The I2C interface supports fast mode and uses two bi-directional lines, SCL (serial clock) and SDA (serial data) respectively. The SPI interface uses four-wire signaling based on SCK (serial clock), SI (serial data input), SO (serial data output), and CS (chip select). Peripheral devices can communicate directly via the PCIe-7360's built-in I2C or SPI protocols along with provided APIs.
USB-1210
4-CH 16-Bit 2MS/s Simultaneous-Sampling USB DAQ Module
The USB-1210 is a 16-bit high-speed USB 2.0-based DAQ module equipped with 4 analog input channels providing simultaneous sampling at up to 2MS/s per channel.
The USB-1210 delivers high accuracy and excellent dynamic performance at maximum sampling rates, and flexible trigger functions. In addition, onboard 256M samples FIFO ensures no data loss during acquisition even when CPU or system loading is heavy.
The USB-1210 is USB bus-powered and equipped with removable screw-down terminals for easy device connectivity. The attached multifunctional stand can be used for desktop, rail, or wall mounting.
Suitable for high-speed data acquisition, laboratory and medical research, the USB-1210 provides a reliable measurement solution at an affordable price.
USB-2405
4-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module (OEM version available)
The USB-2405 is a 24-bit high-performance dynamic signal acquisition USB module equipped with 4 analog input channels providing simultaneous-sampling at up to 128 kS/s per channel. The USB-2405 also features software selectable AC or DC coupling input configuration and built-in high precision 2 mA excitation current to measure integrated electronic piezoelectric (IEPE) sensors such as accelerometers and microphones.
The USB-2405 delivers high precision, DC and dynamic measurement performance with very low temperature drift. The onboard 24-bit Sigma-Delta ADC supports anti-aliasing filtering, suppressing modulator and signal out-of-band noise and providing usable signal bandwidth of the Nyquist rate, making it ideal for high dynamic range signal measurement in vibration and acoustic applications.
The USB-2405 supports digital and analog trigger sources and flexible trigger modes, including post, delay, middle, gated, and pre-triggering for efficient data acquisition with no need for post-processing. The USB-2405 is USB bus powered and equipped with BNC connectors and removable spring terminals for easy device connectivity.
MCM-100
Intel Atom x7-E3950 Processor-Based Machine Condition Monitoring Edge Platform
The ADLINK new MCM-100 machine condition monitoring edge platform, highlighting continuous 24/7 data collection and vibration measurement with maximized precision and sampling rates for rotating machinery and equipment.
Integrating data collection, vibration analysis algorithms, computation, and network connection tasking in a single system, the MCM-100 enables rotating machinery, tooling, and plant and automation equipment operators to easily overcome challenges inherent in conventional equipment maintenance.
ACL-8454/12
8-CH 16-Bit Counters, 2-CH 32-Bit Timer & Digital I/O Cards
ADLINK ACL-8454/12 is a general-purpose timer/counter and digital I/O card. It is a compact-size add-on card for IBM AT compatible PC in control, monitoring and sensing applications.
ACL-8454/12 has four 8254 chips which results in eight general-purpose 16-bit counters and two 32-bit timer. The counters can be set as independent counters or cascaded counters. The gate control of every counter comes from either external source or internal cascaded counters. The clock source comes from either internal timebase or external inputs, which can be selected by jumper setting.
ADLINK ACL-8454/12 delivers cost-effective and reliable digital output capabilities and are ideal for a broad variety of applications.
ACL-8216
16-CH 16-Bit 100 kS/s Multi-Function DAQ Cards
ADLINK ACL-8216 is a 16-CH, 16-bit, 100 kS/s multi-function DAQ Card.
The ACL-8216 device features flexible configurations on analog inputs. It provides analog inputs with 4 programmable input ranges for bipolar inputs.
The A/D on the ACL-8216 device features a sampling rate of up to 100 kS/s with resolution at 16 bits. The device supports automatic analog input scanning, and offers a differential mode for 8-CH analog inputs and maximum noise elimination, as well as single-ended modes for 16-CH analog inputs.
The ACL-8216 also features 2-CH 12-bit analog outputs, 1-CH 16-bit general purpose timer/counter, 16-CH TTL digital and 16-CH TTL digital outputs.
ADLINK ACL-8216 delivers cost-effective and reliable data acquisition capabilities and is ideal for a broad variety of applications.
ACL-8112
16-CH 12-Bit 100 kS/s Multi-Function DAQ Cards
ADLINK ACL-8112 is a high performance, high speed multi-function data acquisition card for IBM PC or compatible computers.
The ACL-8112 series is designed to combine all data acquisition functions, such as A/D, D/A, DIO and timer/counter into a single board, The high-end specifications of the card makes it ideal for a wide range of applications requiring high speed.
The ACL-8112HG provides special high-gain programmable instrument amplifier for low level input applications, such as measurement of thermo-coupling signals. The ACL-8112 devices all provide high speed sampling rate up to 100 kS/s at all gains.
The ACL-8112PG features 16 single-ended inputs and bipolar inputs, while the ACL-8112DG and ACL-8112HG feature 16 single-ended or 8 differential inputs.
All ACL-8112 devices also feature 2×12-bit double-buffered analog outputs, 16 digital inputs and 16 digital outputs, and one general purpose timer/counter.
DAQe-2500 Series
4/8-CH 12-Bit 1 MS/s Analog Output Multi‑Function DAQ PCI Express Cards
ADLINK DAQe-2500 series are high-speed and high-performance analog output multifunction DAQ PCI Express cards.
The devices are able to update up to 8-CH, 12-bit analog outputs simultaneously at sustaining 1 MS/s. The reference sources and the output polarities are programmable on per channel basis, combining with the multiplying DAC architecture, ADLINK DAQe-2500 series DAQ cards can generate complex modulated analog signals.
The hardware-based arbitrary waveform generation frees the CPU intervention even when all analog outputs are updating at full speed, and the lengths of waveforms are only limited by the system memory.
The DAQe-2500 series integrate up to 8-CH, 400 kS/s, 14-bit single-ended analog inputs with programmable polarity, 24-CH programmable digital I/O lines, and 2-CH 16-bit general-purpose timer/counters.
DAQe-2208
96-CH 12-Bit 3 MS/s High-Density Analog Input PCI Express Card
ADLINK DAQe-2208 is a high-density and high-performance analog input card. The device can sample up to 96 AI channels with different gain settings and scan sequences. It makes them ideal for dealing with high-density analog signals with various input ranges and sampling speeds. These devices also offer differential mode for 48 AI channels in order to achieve maximum noise elimination.
DAQe-2213-2214
Low-Cost 16-CH 250 kS/s 16-Bit Multi-Function DAQ PCI Express Cards
ADLINK DAQe-2213/2214 can sample up to 16 AI channels with different gain settings and scan sequences. It makes them ideal for dealing with analog signals with various input ranges and sampling speeds. These devices also offer differential mode for 8 AI channels in order to achieve maximum noise elimination.
