MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Pandora
Pandora Enclosure System
Pandora is an enclosure system designed by Diamond Systems for use with our PNL-EAP panel I/O board mated to a Prometheus, Athena CPU board. (When mated to an Athena, the upper temperature limit is reduced.) It features fast and easy assembly due to the fact that most or all internal cables can be eliminated. Rather than requiring the installation of special corner mounts or forcing the stack into a set of corner guides, the entire stack is bolted directly to the front plate of the case, forming a rugged, easily-handled assembly.
The PC/104 Pandora case measures 5.5" wide by 5.75" high. It comes in three lengths:
The 1.7"(43.18mm) case accommodates the CPU, the panel I/O board, and an optional notebook hard drive.
The 3.0"(76.2mm) case accommodates the CPU, panel board, up to two additional PC/104 boards, and an optional notebook hard drive.
The 5.0"(127mm) case accommodates the CPU, panel board, up to five additional PC/104 boards, and an optional notebook hard drive.
Case lengths accommodate PC/104 boards with stackthrough configuration (long pins on the bottom side) at the bottom of the stack so no special effort is required to obtain non-stackthrough boards or to cut the connector pins. The length is also sufficient to enable mounting a notebook hard drive below the bottom board and attaching it to the rear end plate.
The 3.0" length is designed with the intention of accommodating two additional boards. A typical configuration might include a VGA board and a DC/DC power supply for use in mobile applications. However any two boards can be installed.
The interior cavity is wide enough to install any PC/104 board with almost any I/O connector, including pin headers with ejector latches.
Each Pandora case includes case body, front plate to accommodate the panel board, rear plate, and all mounting hardware (screws and spacers). Additional end plates are available separately.
Jupiter-MM-LP
25 Watt Low-Cost DC/DC Power Supply
Jupiter-MM-LP (JMM-LP) is a low-cost DC/DC power supply ideal for PC/104 applications with lower power requirements. This supply is the lightest-weight PC/104 DC/DC supply available anywhere, due to the fact that it requires no heatsink. Extended temperature rating is included at no additional charge, making Jupiter-MM-LP a true bargain compared to competitive products that require an additional charge.
Jupiter-MM
50 Watt PC/104 DC/DC Power Supply for Vehicle Applications
This rugged, extended-temperature DC/DC power supply is designed specifically for air and ground vehicle applications. It consists of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, heat sink, input and output connectors, power-good indicator lamps, and both 8-bit and 16-bit PC/104 bus headers. Input voltage range is 7 to 30VDC, making it suitable for use with both 12V and 24V systems.
Output power is provided directly onto the PC/104 bus connectors, as well as on an auxiliary connector for external tapping. Both dual output (+5, +12) and quad output (+5, +12, -5, -12) versions are available. Up to 10 amps can be provided on the +5 output, or the 50 watts of total power can be distributed across the 4 outputs.
The low-profile SMT design guarantees that you can add other PC/104 modules on top of this board without any worries of mechanical interference. Simply stack your CPU and other cards on top or below the power supply module to provide power to your PC/104 system.
Neptune
EPIC format CPU with integrated autocalibrating analog I/O, digital I/O and DC/DC power supply
Neptune is an ultra high integration EPIC form factor single board computer combining state-of-the-art CPU and I/O technology with Diamond System’s renowned high accuracy data acquisition circuitry on a single board. Neptune is available with a selection of CPU modules, offering you the perfect combination of price, performance and power. Neptune also offers up to 2GB of DDR/DDR2 DRAM via SODIMM, provides a PC/104-Plus interface for expansion, supporting both PCI and ISA.
Neptune incorporates advanced features such as a front side bus (FSB) ranging from 400MHz to 667MHz depending on the CPU module, four USB ports and S-ATA hard drive interface, depending on the CPU module. The dual graphics engines support both 2D and 3D graphics on dual independent CRT and LVDS displays. Neptune provides both 10/100BaseT and Gigabit Ethernet. Hard drive support is through CompactFlash, rugged IDE FlashDisk and USB bus interfaces. Six RS-232 serial ports (four with RS-422/485), AC ’97 audio, and legacy keyboard, mouse, floppy, parallel and IDE hard drive interfaces are also provided.
Neptune’s optional integrated data acquisition has 32 single ended or 16 differential analog inputs with 16-bit resolution and 250KHz sample rate, four 32-bit analog inputs with 100KHz waveform output capability, autocalibration of the analog circuits, eight optically isolated digital inputs, eight optically isolated digital outputs, 24 programmable digital I/O lines, and two counter/timers. It supports both interrupt and DMA A/D transfers and it uses an enhanced 1,024-sample FIFO with programmable threshold for maximum flexibility and data reliability.
Software support is provided for Windows XP, Linux and Windows CE as well as Diamond System’s Universal Driver programming software for the data acquisition circuitry. For harsh environments, Neptune is engineered with all on-board I/O brought to pin headers with cables available for every connector interface. I/O that utilizes PC-style connectors is placed such that a small panel I/O board can be used to convert to PC-style connectors for use in an enclosure. Standard versions of Neptune operate from 0 to +60°C. Select models have an extended operating temperature range of -40° to +85°C. Conformal coating is available.
Rhodeus
Low Power AMD Geode LX800 PC/104 CPU Module with CRT/LCD, LAN and CompactFlash
Rhodeus is a fan-less PC/104 SBC which features the AMD Geode LX800 low power consumption processor running at 500MHz. It uses high speed DDR SDRAM providing maximum capacity at 1GB. Rhodeus offers fully integrated PC functionality with low power consumption which allows Rhodeus to operate in harsh environments where the airflow for heat dissipation is restricted and heat sinks or fans are unacceptable. Its ruggedability gives it the power to perform round-the-clock in unattended environments.
Other advantages of Rhodeus includes high speed 10/100 Ethernet LAN and ample I/O interfaces, 2 serial ports, 2 USB 2.0 ports, parallel port for peripheral connection, 1 ATA-33 channel, Compact Flash Type-II socket, PC/104 expansion bus, LCD & CRT interface, floppy, and watchdog timer. Rhodeus has all the necessary features and expansion capability in 96 X 90 mm form factor, which makes it ideal for applications where space is limited but multiple I/O configurations are needed. Rhodeus supports Windows 2000, Windows XP, Windows CE 5.0, and Linux.
Helios
300MHz to 800MHz PC/104 Single Board Computer
Helios is a low power, mid range performance PC/104 form factor single board computer combining a highly integrated CPU with Diamond Systems’ renowned high‑accuracy data acquisition circuitry on a single board, reducing size and cost while increasing ruggedness. Helios utilizes a Vortex integrated single chip CPU operating at 300MHz or 800MHz and 128MB or 256MB of DRAM soldered on-board.
Helios incorporates advanced features such as four USB 2.0 ports, an IDE hard drive interface, mounting capability for a solid state flashdisk up to 4GB, and CRT/LVDS LCD graphics. Helios also provides a 10/100Base-T Ethernet interface, two RS-232 serial ports, two RS-232/422/485 serial ports and legacy keyboard and mouse interfaces.
Helios is extremely rugged, featuring on-board soldered DRAM and -40°C to +85°C fan-less operation. Optional hardwired jumpers and latching connectors are available for increased resistance to shock and vibration. Conformal coating is available as an extra cost option.
CM3-BT1
Extreme Rugged PCI-104 Single Board Computer with Intel Atom Processor E3800 Series SOC
The CMx-BTx is a PC/104-based, Single Board Computer (SBC), fully compliant with the PCI-104 Specification, Version 1.1 and partially compliant with the PC/104 Specification, Version 2.6.
PC/104 SBCs are very compact and highly integrated computers. This SBC features the 22nm, Intel Bay Trail SoC. The board provides a DDR3L SO-DIMM socket, a PC/104 connector, a PCI-104 connector, three USB 2.0 ports, up to two Gigabit Ethernet ports, up to two SATA 3 Gb/s ports, one dedicated HD-Audio panel connector, one VGA port, one LVDS port, up to four COM ports, one mini-PCIe slot (with one USB 2.0 port included).
The CMx-BTx can be run with only 5 volts and is capable of running operating systems like DOS, Windows 7/8 in either 32-bit or 64-bit configuration, Linux, VxWorks, and others.
Another feature included on the board is a fail safe BIOS that enables the user to start the module even if the original BIOS is corrupted.
AVA-5500 Series
Rugged, Fanless AIoT Platform with NVIDIA Quadro GPU Embedded for Real-time Video/Graphics Analytics
Artificial Intelligence (AI) technologies are being adopted globally by all industries to drive efficiency, improve productivity and reduce costs. The rail industry is no exception. Fueled by intelligence from AI-driven systems and applications, railway operations are becoming safer, smarter and more reliable, significantly enhancing passenger travel experience and freight logistics services. For rail transportation, AI can provide improvements including fast and convenient ticket-free check-in to accurate arrival-time predictions, personalized infotainment and onboard services, real-time track heath diagnostics, and rapid response in an emergency.
These AI-driven applications only function with proper data input that is collected by massive numbers of Internet of Things (IoT) devices installed in stations, on trains, and along tracks. A successful implementation of such rail applications requires a seamless integration of AI and IoT technologies. By leveraging more than 20 years of expertise in developing highly reliable and available embedded computing systems, ADLINK brings advanced AIoT (AI and IoT) solutions to rail transportation, enabling customers in developing a variety of applications that can deliver true value and performance. ADLINK is committed to helping customers gain competitive advantages by allowing them to focus their development efforts on differentiating their end applications.
Powered by an Intel Core i7 processor and integrated NVIDIA Quadro MXM module, ADLINK’s EN50155 certified AVA-5500 AIoT Platform is not only ruggedized for both wayside and onboard deployment with its wide range DC input and isolated I/O design, but also provides an ideal edge solution for real-time video/graphics analysis applications that are vital to today’s increasingly complex railroad operations.
The target applications include but are not limited to:
Passenger Information Systems
Railroad Intrusion Detection
Train Station Surveillance
Onboard Video Security
Railroad Hazard Detection
ADLINK’s AVA-5500 is being tested and deployed commercially by leading rail system integrators worldwide. In one application, the intelligent platform is installed on special rail inspection trains to process captured images of key wayside equipment in real-time. With a sophisticated algorithm driven by parallel computing and deep learning, the application can effectively identify potential equipment faults at a train speed of 120km/h, and raise the alarm to notify maintenance crews. In another application, the AVA-5500 is used in a train station control office to analyze the real-time video stream received from the platform. The application is able to not only detect suspicious behaviors and trigger alerts, but also conduct post-event analysis.
To meet varying application requirements, the AVA-5500 is also available in variants featuring an additional two USB 2.0 via M12 connectors and two 2.5″ SATA 6Gb/s drive bays, as well as a version supporting +12VDC power input only.
ADLINK’s AVA-5500 can also be deployed for AI-enabled surveillance and video/graphics processing applications in a variety of adjacent markets including mil/aero, public safety, energy and industrial automation.
CSA-7400
4U 19” Network Appliance
The ADLINK CSA-7400 is a high-performance high-density computing platform supporting four dual Intel Xeon processors E5 compute nodes, interconnected by dual redundant switch modules. The CSA-7400 can ensure uninterrupted service delivery through hot-swappable compute nodes and switch modules. It is ideally suited for building nextgeneration high-performance firewalls and virtualized telecom elements. The main features of the CSA-7400 are summarized as follows:
Supports single-system dual Intel Xeon Scalable Processor (Purley platform)
Dual switch modules provide 2×50G internal Ethernet links to each compute node
Support for hardware based acceleration for processing NVGRE and VXLAN, assisting the construction of large layer 2 networks in the cloud
Support for IPMI 2.0 specification, web-based intelligent system management, and support for SOL on compute nodes
Dual redundant power supply units provide active power management on compute nodes, support flexible power limit polices
Support for PacketManager software to provide data plane software stacks for dynamic layer 3 and flow-based forwarding, accelerating development of customer applications
Optional integration of Wind River Titanium Server software to provide carrier grade NFV service
Support for hardware acceleration for Open vSwitch and OpenFlow protocol processing, accelerating SDN services
Applications
High-end Network Security, Telecom DPI, IDS/IPS, DDoS, NGFW, vBRAS/vCPE
Hyper-Converged Platform (HC)
Cloud Edge, Cloud Interconnection, Cloud Security
CSA-7210
2U 19” Network Appliance with Intel Xeon Scalable Silver/Gold Processors for communications and computing infrastructure deployment
2U 19″ Network Appliance with Intel Xeon Scalable Silver/Gold Processors for communications and computing infrastructure deployment.
