MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
cPCI-8301
3U/6U CompactPCI Single 64-bit PMC Slot Carrier Board
The cPCI-8301 is a standard 3U/6U form factor CompactPCI 64-bit PMC carrier board with one PMC site. It supports 32/64-bit, 33/66MHz PCI buses. It is PICMG 2.0 CompactPCI Specification R2.1 and IEEE 1386.1 PMC Standard compliant.
Note: There is no VIO keying on the cPCI-8301. VIO is directly connected to connector J2 and defined by the backplane. Please check your backplane’s VIO before installing your
PMC card onto the cPCI-8301.
cPS-H640/48
400W 6U CompactPCI Hot-Swappable Redundant Power Supply with 36-72 V DC input
PICMG 2.11 47-Pin Hot-Swap Redundant 6U CompactPCI 8HP 400 W Power Module with 36-72 V DC input. Operating temperature: 0°C to +70 °C.
cPS-H640/AC
400W 6U CompactPCI Hot-Swappable Redundant Power Supply with universal AC input
PICMG 2.11 47-Pin Hot-Swap Redundant 6U CompactPCI 8HP 400 W Power Module with Universal AC Input. Operating temperature: 0°C to +70 °C.
cPS-H325/WDC
3U CompactPCI 8HP 16.6-160 VDC Input Power Module
PICMG 2.11 47-pin hot-swap redundant 3U CompactPCI 8HP 120-310 W power module with 16.6-160 VDC Input. Operating temperature: −40°C to +85 °C. Conformal coating model available by request.
cPS-H325/24
PICMG 2.11 47-Pin Hot-Swap Redundant 3U CompactPCI 8HP Power Module with 18-36 VDC Input
PICMG 47-pin hot-swap redundant 3U CompactPCI 8HP 250 W power module with 18-36 VDC Input. Operating temperature: −40°C to +70 °C.
cPS-H325/48
PICMG 2.11 47-Pin Hot-Swap Redundant 3U CompactPCI 8HP Power Module with 36-72 VDC Input
PICMG 47-pin hot-swap redundant 3U CompactPCI 8HP 250 W power module with 36-72 VDC Input. Operating temperature: −40°C to +70 °C.
cPS-H325/AC
PICMG 2.11 47-Pin Hot-Swap Redundant 3U CompactPCI 8HP Power Module with universal AC Input
PICMG 47-pin hot-swap redundant 3U CompactPCI 8HP 250 W power module with universal AC Input. Operating temperature: -40°C to +70 °C.
cPCIS-6418U
4U 8-slot CompactPCI System with Redundant Power Supplies
The cPCIS-6418U Series Subsystem is designed for maximum density and has 8 horizontal slots for 6U cPCI boards with 80mm RTMs. The chassis is 4U in height and standard 19" rack mount width.
The cPCIS-6418U provides 2+1 hot swappable 500W+250W redundant power supplies with universal AC input. It has a PICMG 2.1 Hot Swap compliant 64-bit 8-slot CompactPCI backplane with PICMG 2.5 H.110 CT Bus (cPCIS-6418U/N110 does not support CT Bus).
A built-in alarm board monitors chassis temperature, voltage and fan status and provides an RS-232 interface on the rear panel.
cPCIS-6400X
4U 5-slot CompactPCI Chassis with 400 W Power Supply
The cPCIS-6400U/6400X Series subsystems are designed for 6U cPCI boards with 80mm RTMs. The chassis is 4U in height and standard 19″ rack mount width.
The cPCIS-6400U provides 2+1 hot swappable 500W+250W redundant power supplies with universal AC input, while the cPCIS-6400X has a built-in 400W AC-input ATX power supply with cooling fan. Both series have PICMG 2.1 Hot Swap compliant 32/64-bit 5-slot CompactPCI backplanes and a PICMG 2.5 H.110 CT Bus.
cPCIS-6400U
4U 5-slot CompactPCI Chassis with Redundant Power Supplies
The cPCIS-6400U/6400X Series subsystems are designed for 6U cPCI boards with 80mm RTMs. The chassis is 4U in height and standard 19″ rack mount width.
The cPCIS-6400U provides 2+1 hot swappable 500W+250W redundant power supplies with universal AC input, while the cPCIS-6400X has a built-in 400W AC-input ATX power supply with cooling fan. Both series have PICMG 2.1 Hot Swap compliant 32/64-bit 5-slot CompactPCI backplanes and a PICMG 2.5 H.110 CT Bus.
