MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
TMX32
Analog Front-End Board
Input-Expansion Board with Thermocouple Compensation.
ETX-NR667
ETX module
The ETX-NR667s CPU scales from a ULV Intel Celeron up to an Intel Core 2 Duo that allows it to be used in both average performance applications, that require very low power, and in applications that need high speed with high-end graphics support. The module has one SODIMM socket that can accommodate a maximum of 2 GB of DDR2 memory. Graphics support on the module includes single- or dual-channel 24-bit LVDS, Analog CRT and TV-out (SDTV and HDTV). The module further incorporates an Intel based 10/100Base-T Ethernet port, a PATA EIDE controller, a dual-port SATA controller, four USB v2.0 ports, two serial ports, one parallel port (SPP/ECP/EPP) shared with FDD, one PS/2 keyboard/mouse interface, an AC97 audio interface, and power management functionality. The ETX-NR667 fully supports PCI and legacy ISA and comes with embedded features such as Watchdog controller, RS-232 console redirection and CMOS EEPROM backup for BIOS settings and battery-less operation.
ETX-IM333
ETX module
ETX-IM333 is based on the Intels embedded 855GME Northbridge and ICH4 Southbridge. It supports Celeron M and Pentium M (Banias/Dothan) CPUs in the range of 600MHz to 2.0GHz. The CPU / Chipset combination is ideal for applications that require high performance, reliability, and long product availability. The Intel 855GME Chipset graphics memory controller hub (GMCH-M) provides integrated graphics (250MHz) capabilities and power saving features. The 855GME Northbridge incorporates a DDR memory controller and supports DDR333 in addition to DDR266/200 memory for up to 1GB in a single 200-pin SODIMM socket. Graphic support for CRT and single/dual channel LVDS is included. Optionally, the board can support TV 0ut (SDTV and HDTV). The integrated EIDE controller supports both PIO and UDMA modes, USB ports v2.0, two serial ports, one parallel port (SPP/ECP/EPP), one PS2 keyboard/mouse interface, AC97 audio interface, Fast Ethernet LAN controller, and power management functionality.
ETX-IM266
ETX module
ETX-IM266 is based on the Intels embedded 852GM Northbridge and ICH4 Southbridge. It supports Celeron M CPUs in the range of 600MHz to 1.5GHz. The CPU / Chipset combination is ideal for applications that require average performance, low cost, reliability, and long product availability. The Intel 852GM Chipset graphics memory controller hub (GMCH-M) provides integrated graphics (250MHz) capabilities and power saving features. The 852GM Northbridge incorporates a DDR memory controller and supports DDR266/200 memory for up to 1GB in a single 200-pin SODIMM socket. Graphic support for CRT and single/dual channel LVDS is included. Optionally, the board can support TV 0ut (SDTV and HDTV). The integrated EIDE controller supports both PIO and UDMA modes, USB ports v2.0, two serial ports, one parallel port (SPP/ECP/EPP), one PS2 keyboard/mouse interface, AC97 audio interface, Fast Ethernet LAN controller, and power management functionality.
ETX-GLX
ETX module
AMD Geode LX800 ETX module with USB 2.0 and SATA.
Express-DW400
COM Express module
The Express-DW400 is based on Intel Core 2 Duo and Core Duo CPUs, in the range of 1.06 Ghz up to 2.1 GHz, and the Intel 3100, that is an integrated chip containing the functionality of both a Memory Controller Hub and an I/O Controller Hub. The Intel 3100 Chipset provides a x8 PCI Express interface that may alternatively be configured as two independent x4 PCI Express interfaces in addition it support four x1 PCI Express interfaces. The Intel 3100 Chipset includes an integrated four-channel Enhanced Direct Memory Access (EDMA) controller to perform background data transfers between locations in main memory, or from main memory to a memory-mapped I/O destination. It supports registered ECC type, single channel DDR2 400MHz memory. The module is either available with two vertical placed SODIMM sockets or with one horizontal placed SODIMM socket for a maximum of up to 4 GB system memory.
Express-IW400
COM Express module
The Express-IW400 is based on Intel Celeron M and Pentium M CPUs, in the range of 1 Ghz to 1.8 GHz, and the Intel 3100, that is an integrated chip containing the functionality of both a Memory Controller Hub and an I/O Controller Hub. The Intel 3100 Chipset provides a x8 PCI Express interface that may alternatively be configured as two independent x4 PCI Express interfaces in addition it supports four x1 PCI Express interfaces. The 3100 Chipset includes an integrated four-channel Enhanced Direct Memory Access (EDMA) controller to perform background data transfers between locations in main memory, or from main memory to a memory-mapped I/O destination. It supports registered ECC type, single channel DDR2 400MHz memory. The module is either available with two vertical placed SODIMM sockets or with one horizontal placed SODIMM socket for a maximum of up to 4 GB system memory.
Express-IA533
COM Express module
The Express-IA533 is based on Intel® 915GM with ICH6-M Soutbridge with Enhanced Intel® Speedstep support. It can support Intel Celeron® M and Pentium® M CPUs in the range of 600MHz to 2.1GHz at FSB400/533. The module comes with a single onboard Gigabit Ethernet port and Dual channel SATA. It has legacy support for Parallel IDE, 32-bit PCI and ISA through LPC. The Express-IA533 comes equipped with many embedded features such as : Remote console, CMOS backup in EEPROM, CPU and System monitoring and a Dual Watchdog timer for NMI or RESET. The Express-IA533 supports dual channel DDR2 533MHz memory, one bank soldered and one bank on the SODIMM. The 915GM GCMH has integrated graphic support for CRT a single/dual channel LVDS. In addition to the onboard integrated graphics, a Graphic PCI Express x16 slot is available for conection to high end PCI Express x16 Graphic chipsets.
Express-MC800
COM Express module
Intel® Core™ 2 Duo Processor COM Express™ module with High End Graphics.
Magellan COM Express ERS
COM Express Form-Factor Embedded-Ready Subsystem with PCI-104, SUMIT, and FeaturePak expansion and Configurable COM Express CPU
Magellan is a high performance, highly integrated board-level embedded-ready subsystem (ERS) that matches the footprint of the popular COM Express computer-on-module (COM) standard.
Magellan's CPU core consists of a COM Express CPU module and heatspreader mounted on its bottom side, resulting in optimal thermal management and increased space for I/O functions and connectors. This innovative design makes it possible for Magellan to integrate dual gigabit Ethernet LAN ports, a 7-30V DC/DC power supply, a full set of peripheral interface header connectors, stackable PCI-104 or SUMIT expansion, and a FeaturePak zero height expansion socket, in addition to a complete embedded-PC core -- all within the 95mm x 125mm COM Express footprint.
Magellan is offered in a range of models that vary according to the choice of COM Express CPU module and SDRAM capacity (socketed or soldered-on). Magellan low cost (LC) models come with only one gigabit Ethernet port and no DC/DC power supply. Magellan can be used either as a highly integrated embedded component, or as a platform for application development and reference designs.
The Magellan baseboard layer includes connectors and interfaces for USB, serial, gigabit Ethernet, audio, and SATA mass storage devices. It supports the connection of a wide variety of displays, including CRTs, LVDS-interfaced flat panels, and televisions. Power is supplied by means of a robust six-pin terminal block.
