MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
DT-OM
AquaPoint™ Sealed Industrial Optical Mouse
Constructed using the same rugged materials that go into the entire line of iKey peripherals, the NEMA 4X AquaPoint™ industrial pointing device features a sealed industrial silicone overlay and robust polycarbonate frame. Its reliable optical technology allows it to function on most surfaces, while its smooth-surfaced buttons make the unit easy to clean. Solid-state engineering ensures the AquaPoint™ a long operating life, making the new device the ideal alternative to the office-grade mice that are so commonly replaced in harsh environment settings. The AquaPoint™ is available in either USB or PS/2.
LX1200TI
12" High Bright LCD Monitor
The LX1200TI is the perfect sized monitor for use in law enforcement and rugged fleet vehicle applications. Key features like a transflective AMLCD for daylight/night viewing, clear glass touchscreen, and rugged design improve user ergonomics and reduce ownership cost.
LX1201PTI
12" Mariner Touch Monitor
The LX1201PTI is ideally suited for marine environments where sun, moisture, salt and sea fog create challenges for standard, off-the-shelf displays. They offer a sealed enclosure, optical bonding and an ultra-wide vertical viewing angle and an integrated touch screen. Optical bonding provides durability and contrast, which are essential for a display in a marine vessel.
The LX Mariner series the first of its kind to integrate a touchscreen as part of the solution. Up to this point, boat manufacturers were limited to the use of membrane buttons below the screen as a user interface control. This breakthrough combined with its sunlight readability, make new Planar displays attractive to boat manufacturers and their customers.
M-Max 700 PR4
Rugged Industrial Platform
M-Max 700 PR4 is a rugged high performance industrial computer for demanding applications. The standard version of this full function computer, designed for use in harsh environments (extreme temperatures, dust, humidity and vibration) is IP65 or IP66 rated.
The system is based on Intel Atom D525 CPU 1.8 GHz. Intel’s integrated graphics controller GMA3150 provides 2D and 3D capabilities and hardware video decoding. I/O connectivity includes 1 Gigabit Ethernet port, 3 serial ports, 4 USB 2.0 ports and 2 PS/2 ports for keyboard and mouse. Data storage is industrial SSD. The power consumption in the basic configuration is 19 W maximum.
The rugged aluminum enclosure with dual shock and vibration system and passive cooling system provides highly reliable silent operation in harsh environments and the extended temperature range of −20 to +60 °C or −40 to +65 °C (optional).
These features allow the M-Max 700 PR4 to tackle the most demanding tasks.
Applications:
Road, Rail, Air and Marine Transport
Mining
Agriculture
Processing Facilities
MZ-6SER
PC/104 bus compatible ZFx86 SBC with six serial ports
The MZ-6SER is an embedded system controller measuring just 3.63 inches x 4.86 inches,
which incorporates the revolutionary ZFx86 “PC-on-a-chip” processor. The MZ-6SER offers
the quickest route of integrating a full x86 AT-compatible computer into your embedded control
application. In addition, the built-in peripherals minimize the number of additional modules
required. By combining the system hardware, I/O, software, and solid-state mass storage, the
MZ-6SER lowers your exposure to possible development risks, costs and significantly reduces
your time-to-market.
The MZ-6SER’s fully compatible PC/104 embedded expansion bus, permits easy integration to
a wide selection of low-cost hardware peripherals. The numerous features provide an ideal
price/performance solution.
MZ104+
100Mhz PC/104 Module w/ Dual LAN
The MZ104+ embedded control module incorporates the revolutionary ZFx86 “PC-on-a-chip” processor with dual 10/100BaseT Ethernet and 32-bit PCI Bus. The MZ104+ offers the quickest route of integrating a full x86 AT-compatible computer into your embedded control application using the PC/104+ form factor. The MZ104+ is fully compatible with all standard PC Software and will run any standard operating system capable of running on a fully compatible PC with FPU such as Linux, DOS, many RTOS, and WinCE, Windows 9x, and Windows NT.
MZ104-EV
PC/104 Low Cost CPU Board with ZFx86
The MZ104-EV embedded control module incorporates the revolutionary ZFx86 “PC-on-a-chip” processor with a 10/100Base-T Ethernet and a CRT/LCD Video Controller. The MZ104-EV offers the quickest route to integrating a full x86 AT-compatible computer into your embedded control application, using the PC/104 form factor. The MZ104-EV is fully compatible with all standard PC Software, and will run any standard operating system capable of running on a fully compatible PC with FPU, such as Linux, MS & DR-DOS, WinCE, Windows 9x/ME/NT/2000, and many others.
MZ104
100Mhz PC/104 Module
The MZ104 is a PC/104 compliant system controller measuring just 3.55 inches by 3.775 inches. The MZ104 offers the quickest route of integrating a full x86 AT-compatible computer into your embedded control application using the PC/104 form factor. In addition, the built-in peripherals minimize the number of additional modules required. By combining the system hardware, I/O, software (integrated RTOS image) and solid-state mass storage, the MZ104 lowers your exposure to possible development risks, costs and significantly reduces your time-to-market. The MZ104’s full compatibility with the popular PC/104 embedded expansion bus, which allows you to easily integrate the widest selection of low-cost hardware peripherals. The numerous features provide an ideal price/performance solution.
ETX-GX2
ETX module
ETX-GX2 is an RoHS compliant ETX module specially designed to facilitate speedy development of semi custom designs. The ETX-GX2 core consists of an AMD Geode GX2 processor and AMD Geode CS5535 companion device. The GX2 CPU onboard is available in two version : as a Geode GX533@1.1W or as a Geode GX466@0.9W The ETX-GX2 supports DDR based SODIMMs. Memory can be soldered on board as either 128MB or 256MB, and/or can be inserted in the onboard 200-pin SODIMM socket that accept up to 512 MB DDR SODIMMs. The ETX-GX2 incorporates a VGA controller, an single channel EIDE controller supporting both PIO and UDMA modes, 4 USB ports, two serial ports, one parallel port (SPP/ECP/EPP) shared with FDD, one PS2 keyboard/mouse interface. Additionally onboard are an 10/100Base-T Ethernet port, watchdog timer, an AC97 Audio Codec and support for LVDS based Flat Panel displays.
Pyxis-MM
Pyxis-MM GPS Receiver and Modem Carrier Board
Pyxis-MM enables you to install a Trimble Navigation GPS receiver module and the SocketModem family of embeddable modem modules from MultiTech Systems onto a PC/104 system. Use it to provide location identification and communications features for vehicle-based embedded systems such as vehicle tracking, navigation, or precision farming. Or use it to communicate via land-line telephone connection to remote equipment such as weather stations or oil & gas wells.
You can install a GPS receiver module alone, any one SocketModem module alone, or a GPS receiver plus a modem module. Pyxis-MM includes all the necessary I/O circuitry to interface the selected modules onto the PC/104 bus, including serial ports, power supplies, and land-line telephone interface. A backup power connector is provided to maintain GPS almanac and minimize time to first fix. The board runs on +5V and operates over -40 to +85oC.
