MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Kvaser OBD II Extension Cable
Interface accessory
A Kvaser OBDII Extension Cable is an extension cable with a male to female OBD II connector (EAN Numbers 73-03130-00301-9 and 73-03130-00347-7), or connects any Kvaser CAN bus interface with a 9 Pin DSUB connector to a vehicle with an OBD II (J1962) connector (EAN Numbers 73‑03130‑00348‑4 and 73-03130-00349-1).
Ordering information
EAN Number: 73-03130-00347-7
OBD II (SAE J1962) connector (male - female). Length 2500 mm (98.4in.).
EAN Number: 73-03130-00301-9
OBD II (SAE J1962) connector (male - female). Length 5000 mm (196.9in.).
EAN Number: 73-03130-00348-4
OBD II (SAE J1962) male connector - 9 pin DSUB female connector. Length 10000 mm (393.7in.).
EAN Number: 73-03130-00349-1
OBD II (SAE J1962) male connector - 9 pin DSUB female connector. Length 15000 mm (590.6in.).
FlexTainer
EPIC, MITX, EBX Enclosure
The FlexTainer is a rugged enclosure system for packaging EPIC, EBX, or Mini-ITX CPU payloads. It is constructed of .125″ aluminum and designed for hostile and mobile environments. The FlexTainer features a dual system of shock and vibration isolation: The CPU payload is mounted horizontally in the enclosure with two internal rubber corner rails to absorb high-frequency vibrations, while the entire enclosure is mounted on the host platform with a thick rubber pad which absorbs low-frequency G-forces. The rubber pad may be removed for optional mounting solutions such as hard mounting, flange endcap, or fluidic mount assembly.
Advantages
Dual shock and vibration protection system
EPIC, Mini-ITX, and EBX mounting
Passively cooled
Easily customized: length, coating, etching, milling, mounting
6036-T5 extruded aluminum
high grade extruded rubber
available in standard lengths:
4.55″ (EPIC), 6.75″ (Mini-ITX) and 10″ (EBX)
RoHS compliant
TS-I2C
I2C remote temperature sensor
The TS-I2C is designed to interface directly with HESC type power supplies, providing remote temperature monitoring.
Skymaster Combo
2-in-1 GPS and GSM Antenna
2-in-1 GPS & GSM antenna
Advantages
27 dB GPS
3 dB GSM
10 MHz Band Width
50 ohm impedance
4.5 — 5.5 VDC/28mA power consumption
5m RG-174 with FME connector GPS
5m RG-58 with FME connector GSM
-35°C~+85° operation temperature
-40°C~+90° storage temperature
Smart Skymaster
Hard Mount GPS Antenna / Receiver Combo
The Smart SkyMaster combines the latest 12 parallel channel GPS receiver technology together with our high gain, low noise active patch antenna technology into a single innovative harsh environment enclosure. Tri-M brings you a simple concept where just attaching the Smart SkyMaster to your notebook or desktop computer, completes a «Plug-Location-Navigate» capability to use very accurate, reliable and free, three-dimensional positioning information in your day-to-day life.
Advantages
12 channel receiver
Hard-steel with coarse tread
Power input: 8V to 35V DC
Operating range: −40°C to +80°C
Power consumption: 0.9W max.
Position accuracy: 15M or 50 ft RMS
Xtreme-Radiator
Extended Range Indoor GPS Re-radiating System
The Xtreme-Radiator is an enhanced version of our best‑selling Super‑Radiator with a wider radiating range of 30 meters. This excellent GPS L1 band signal repeating antenna features dual antennas to re-transmit real-time GPS satellite outdoor receptions to an indoor environment.
Designed to operate as a whole, the system kits are composed of a highly sensitive external GPS antenna, precisely calibrated amplifier circuit with Helix type indoor repeating antenna and a built-in power supply regulator. The Helix type indoor antenna system allows multiple GPS receiver users to perform on-the-fly normal receiver operation within a closed environment, while the main GPS antenna is installed on an unmanned location outdoors.
The Xtreme-Radiator is most commonly used in laboratories and in underground garages or other buildings requiring a GPS signal indoors. A common application is in firehalls where the Xtreme-Radiator supplies a GPS signal to the fire trucks while they are in the garage, reducing response time when the trucks are needed.
Advantages
GPS signal repeating distance is approximatly 30 metres
One external antenna for different handheld GPS receivers
Independent Power Source
Re-transmits GPS signals to an otherwise unreachable location
External antenna: permanent screw mount
Internal re-radiator: screw mount or suction cups
Super-Radiator
Indoor GPS Re-Radiator
The Super-Radiator GPS re-radiator system is a complete external hard mount high gain GPS antenna and passive Helix type indoor GPS re-radiating antenna. Simply affix the permanent screw mount GPS antenna outside, attach the smaller GPS re-radiating antenna indoors with either screw mount or use the included suction cups and plug it into the included 40 meter signal cable. The included reverse protected regulator AC adapter powers both units. GPS signals can now be received 5 to 10 meters from the re-radiating antenna — This allows GPS devices to be used inside virtually any enclosed area.
The Super-Radiator is most commonly used in laboratories and in underground garages or other buildings requiring a GPS signal indoors. A common application is in firehalls where the Super-Radiator supplies a GPS signal to the fire trucks while they are in the garage, reducing response time when the trucks are needed
Advantages
GPS Re-Radiating distance is 5 to 10 metres
One external antenna for different handheld GPS receivers
Independent Power Source
Re-transmits GPS signals to an otherwise unreachable location
External antenna: permanent screw mount
Internal re-radiator: screw mount or suction cups
Skymaster
Hard Mount GPS Antenna
Hard Mount GPS Antenna.
Advantages
Patch antenna and amplifier
60 mm x 38 mm in size
Bulkhead mount with threaded nut
-30°C to +85°C (-22°F to +185°F) operating range
Fully waterproof
Micro Mouse
Micro GPS Antenna
Micro-Mouse is the most compact GPS antenna available on the current market. Its state-of-the-art technology allows for its micro size, making it ideal when space and weight are important. With good coverage almost all the way to the horizon, it performs excellently in foliage or urban canyon environment-even in the presence of electromagnetic interference! Featuring diminutive and rugged enclosure and unparalleled performance, Micro-Mouse is compatible with almost every GPS receiver model on the markets and provides an excellent alternative for a vast range of GPS applications including AVL, Vehicle Navigation, Aviation, and Military.
Advantages
24dB gain active GPS antenna
max of 12mA current consumption
Input range: 2.5 VDC to 5.5 VDC
30 grams (less cable & connector)
-30 to +85° C operating range, Fully waterproof
Choice one for the following connectors:
SMA, SMB, BNC, MCX, TNC or NTYPE
Right-angle connector available
Mighty Mouse III
Small GPS Antenna
The MM3-GPS is a small 26dB gain active GPS antenna with an input range of 2.5V to 5.5V DC and maximum consumption of 6mA. Common features to its predecessors, the Mighty Mouse and Mighty Mouse II include a 5m cable, combination magnetic mount or screw-plate mounting and universal FME connector allowing the easy swapping out of connectors (SMA, SMB, BNC, MCX, TNC, or N-Type) to suit the application.
Advantages
26dB gain active GPS antenna
max of 6mA current consumption
Input range: 2.5 VDC to 5.5 VDC
3 stage amplifier and band pass filtering
Extreme low power
Magnetic or screw-plate mounting
-40 to +85° C operating range, Fully waterproof
Choice one for the following connectors:
SMA, SMB, BNC, MCX, TNC or NTYPE
Right-angle connector available
