MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
ADLMES9200
3- and 5-card rugged chassis systems
The rugged ADLMES9200 IP67 chassis is a successor to ADL’s popular ADLMES8200 IP65 chassis system. Improvements include lower weight, lower cost, quick and reliable IP67 integration for rugged military and industrial applications. Design features for military / defense system include MIL-STD 810 tolerance and MIL-STD 461/704/1275 compliance capability.
The ADLMES9200 is compatible with all ADL’s full range of Intel-based PC/104 and 3.5″ SBC’s which range from low-power ATOM to the latest Intel Core i5/i7 processors. Power supply options include ADL’s range of long-life (MTBF>500,000 hrs) with options for MIL-STD 461/704/1275 compliant filtering.
The uni-body design, with minimal, reliable EMC-compliant gasketing makes for better IP67 Ingress protection as well as assembly. Full design and development services are available for chassis customization, cabling, integration and modeling support.
Applications
Rugged: Ground Vehicles, Mission / Payload Computing, Secure Communications, SWaP-constrained systems for mobile, airborne and vehicle
Rugged Industrial: Oil and Gas, Road Construction and Inspection, Mining, Agriculture
ADLLAN
2x PC/104-Plus Ethernet LAN
The Intel 82541ER Gigabit Ethernet Controller provides optimized Gigabit networking for PCI designs. This highly efficient controller, with enhanced power management, consumes less than 1.0W of power at Gigabit speeds. When no signal is detected on the wire, the controller reduces power consumption by «downshifting» to 100Mbps to 10Mbps and then powering down the physical- layer circuitry (PHY).
When a signal is detected, the controller automatically negotiates the connection to Gigabit, if available.
The Intel 82541ER combines Intel’s fifth-generation Gigabit MAC design with fully integrated state-of-the-art PHY technology, which meets or exceeds IEEE 802.3ab specifications for Bit Error Rate performance.
Mesa 4I24
72/96 bit parallel I/O cards
The MESA 4I24 series of cards are 96 or 72 bit parallel I/O interfaces implemented on the PC/104 bus.
The 4I24 uses 4 (4I24, 4I24I) or 3 (4I24M) socketed 82C55 PIO chips to give for a total of 96 I/O bits (4I24, 4I24I) or 72 I/O bits (4I24M). 3.3K Pullup resistors are provided on all ports to simplify interfacing to contact closure, opto-isolators, etc.
The 4I24 series includes three models with different I/O connectors. The standard 4I24 uses two 50 pin headers for I/O connections. The 50 pin connectors each have 48 I/O bits, ground, and power. The 4I24I uses four 26 pin headers with ISO standard pinout (24 I/O bits per 26 pin connector, pin 2 = GND, pin 26= 5V). The 4I24M has I/O module rack compatible pinouts with three 50 pin connectors each having 24 I/O bits with interleaved grounds. 5V power on the I/O connectors is fused on the 4I24.
All 4I24 models use the 16 bit stack through type PC/104 bus architecture. Four layer circuit card construction is used to minimize radiated EMI and provide optimum ground and power integrity. All CMOS design keeps power consumption to a minimum.
Mesa 4I20
PC/104 card with 24 open drain 350 mA outputs
The 4I20 is a stackable PC/104 card with 24 open drain 350 mA outputs for solenoids, valves, relays, motors, incandescent lamps and other medium power DC loads.
The 4I20 outputs are galvanically isolated from logic ground to avoid ground loops, as the total ground return current be as much as 8.4 amps. The isolation also allows the 4I20 to drive ground referred loads.
Mesa 4I23
Quad Serial Board
The 4I23 is a low cost, four channel serial port card on a stackable PC/104 bus card. The 4I23 is available in three versions: quad RS-232, quad RS-422, and a model with two RS-232 and two RS-422 channels.
The 4I23 uses 16C550 type FIFO'ed UART's. These UART's have built-in 16 byte receive and transmit FIFO's. The 16 character FIFO's reduce interrupt overhead and allow higher data rates without losing characters. The receive FIFO's also increase the allowable interrupt latency. This is especially important when using programs like WINDOWS that disable interrupts for comparatively long periods of time.
Unlike many serial cards, the 4I23 is implemented with the 16 bit bus connector so that each of the four serial ports on the 4I23 can use any of the 11 available AT bus interrupts.
PCM-C418
PC/104 Single Board Computer
WinSystems’ PCM-C418 single board computer (SBC) is a PC104 form factor featuring the latest generation DM&P Vortex86DX3 SOC processor. Its small size, low power, rugged design, and extended operational temperature range make it a great fit for industrial IoT applications and embedded systems in the industrial control, transportation, Mil/COTS, and energy markets.
SBC35-C398Q-2-0
Quad-Core Freescale i.MX 6Q Cortex A9 Industrial ARM® SBC
WinSystems’ SBC35-C398Q quad-core single board computer combines high performance multimedia graphics with a rich mix of industrial I/O. The Freescale i.MX 6Q processor’s integrated power management provides excellent efficiency and allows operation from -40° to +85°C without active cooling. It is designed for demanding graphical applications in security, transportation, medical, and digital signage.
JTF Series
Component power supply
8-15 Watts
High Power Density
Wide 4:1 Input Range
Operating Temperature -40 °C to +105 °C
Single & Dual Outputs
Standard Remote On/Off
1600 VDC Isolation
AL551
Intel Atom E3900 3.5" SBC
Intel Atom E3900 3.5" SBC
1 DDR3L SODIMM up to 8GB
Three independent displays: VGA + LVDS + DP++
Wireless communication: mini PCIe
Rich I/O: 2 Intel GbE, 2 COM, 2 USB 3.0, 4 USB 2.0
15-Year CPU Life Cycle Support Until Q1' 31 (Based on Intel IOTG Roadmap)
PC104A-AL
SBC with Intel Atom x5-E3940 Processor
DDR3L SODIMM memory up to 8GB
Dual Displays: VGA + LVDS
Support the PC/104 and PCI-104 connector on board
Low Power Consumption: 9.5W
PC/104 specification 2.6
Wide operating temp: -40 to 85°C
