MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
DAQe-2200 Series
64-CH, 12/16-Bit, Up to 3 MS/s Multi-Function DAQ PCI Express Cards
ADLINK DAQe-2200 series are high-density and high-performance multifunction DAQ PCI Express cards.
The devices can sample up to 64 AI channels with different gain settings and scan sequences. It makes them ideal for dealing with high-density analog signals with various input ranges and sampling speeds.
These devices also offer differential mode for 32 AI channels in order to achieve maximum noise elimination.
DAQe-2000 Series
4-CH 14/16-Bit Up to 2 MS/s Simultaneous-Sampling Multi-Function DAQ PCI Express Cards
ADLINK DAQe-2000 series products are simultaneous-sampling multi-function PCI Express DAQ cards to meet a wide range of application requirements.
The devices can simultaneously sample 4 AI channels with differential input configuration in order to achieve maximum noise elimination. They also provide 2-CH 12-bit analog outputs with waveform generation capability, which can be performed together with analog input functions.
If more analog input or output channels are required, multiple cards can be synchronized through the SSI (system synchronization interface) bus. This makes the DAQe-2000 series ideal for the stimulus/response test.
PCI-9222/9223
16/32-CH 16-Bit 250/500 KS/s Multi-Function DAQ Cards with Encoder Input
The ADLINK PCI-9222/PCI-9223 is a 16-bit, 16/32-CH, 250/500 KS/s high performance DAQ card with 8 different input ranges. It also features 2-CH 16-bit analog outputs capable of a 1 MS/s update rate, 2-CH encoder inputs, and programmable function I/O.
The software-programmable function I/O supports a variety of applications, including TTL digital I/O, high-speed DIO, general-purpose timer/counter, pulse generation, and PWM output. Analog input, analog output, and function I/O at full speed simultaneously, and multiple cards can be synchronized through the SSI (System Synchronization Interface) bus if users need more channels than a single board can provide.
Ideal for mixed-signal tests, laboratory research, and factory automation, PCI-9222/PCI-9223 is the best single-board solution on the market providing the best integration capability of multiple tasks with high performance and an affordable price.
PCI-9221
Low-Cost 16-Bit Multi-Function DAQ Card with 2‑CH Encoder Input
The ADLINK PCI-9221 is a 16-bit high-resolution and low‑cost multi-function DAQ card, with 16-CH single ended or 8-CH differential input capable of up to 250 kS/s sampling rate.
In addition, the PCI-9221 comes with a 2-CH 16-bit static analog output and programmable function I/O. The software-programmable function I/O supports a variety of applications, including TTL digital I/O, general-purpose timer/counter, encoder input, and PWM output.
The flexible function I/O makes the PCI-9221 the best single-board solution for combined data acquisition and simple motion control functionalities. Ideal for manufacturing, laboratory research, and factory automation, the PCI-9221 comes with all the functions you need at an affordable price.
DAQ-2213/2214
Low-Cost 16-CH 250 kS/s 16-Bit Multi-Function DAQ Cards
The ADLINK DAQ/DAQe-221x Series is a 16-ch low cost, high performance multifunction DAQ card that can sample up to 16 analog input channels with different gain settings and scan sequences, making it ideal for dealing with analog signals with various input ranges and sampling speeds.
The ADLINK DAQ/DAQe-221x Series also offers differential modes for 8 AI channels in order to achieve maximum noise elimination.
DAQ/DAQe-221x Series has 2-ch 12-bit analog output with wave form generation capabilities. The DAQ/DAQe-221x Series also features analog and digital triggering, 24-ch programmable digital I/O lines, and 2-ch 16-bit general-purpose timers/counters.
Like all the other members in DAQ/DAQe-2000 family, multiple DAQ/DAQe-221x Series cards can be synchronized through the system synchronization interface (SSI) bus. Auto-calibration adjusts the gain and offset to within specified accuracies eliminate the need to manually adjust trimpots.
DAQ-2500 Series
4/8-CH 12-Bit 1 MS/s Analog Output Multi‑Function DAQ Cards
ADLINK DAQ-2501 and DAQ-2502 are high-speed and high-performance analog output multifunction DAQ cards.
The devices are able to update up to 8-CH, 12-bit analog outputs simultaneously at sustaining 1 MS/s. The reference sources and the output polarities are programmable on per channel basis, combining with the multiplying DAC architecture, ADLINK DAQ-2500 series DAQ cards can generate complex modulated analog signals.
The hardware-based arbitrary waveform generation frees the CPU intervention even when all analog outputs are updating at full speed, and the lengths of waveforms are only limited by the system memory.
The DAQ-2500 series integrate up to 8-CH, 400 kS/s, 14-bit single-ended analog inputs with programmable polarity, 24-CH programmable digital I/O lines, and 2-CH 16-bit general-purpose timer/counters.
DAQ-2208
96-CH 12-Bit 3 MS/s High-Density Analog Input Card
The DAQ/DAQe/PXI-2208 card is an advanced data acquisition card based on the 32-bit PCI or PCI Express architecture. High performance designs and state-of-the-art technology make these cards ideal for data logging and signal analysis applications in medical, process control, etc.
DAQ-2200 Series
64-CH, 12/16-Bit, Up to 3 MS/s Multi-Function DAQ Cards
ADLINK DAQ-2204, DAQ-2205, and DAQ-2206 are high-density and high-performance multifunction DAQ cards. The devices can sample up to 64 AI channels with different gain settings and scan sequences. It makes them ideal for dealing with high-density analog signals with various input ranges and sampling speeds.
These devices also offer differential mode for 32 AI channels in order to achieve maximum noise elimination The DAQ-2200 series also feature analog and digital triggering, 2-CH 12-bit analog outputs with waveform generation capability, 24-CH programmable digital I/O lines, and 2-CH 16-bit general-purpose timer/counters.
Express-RLP
COM Express Rev. 3.1 Basic Size Type 6 Module with 13th Gen Intel Core Mobile Processor
ADLINK’s Express-RLP COM Express Type 6 Basic size module is based on 13th Gen Intel Core mobile processor (formerly codenamed Raptor Lake-P) and is the first COM Express utilizing Intel’s advanced hybrid architecture (with up to 6 Performance-cores and 8 Efficient-cores) offered with industrial-grade/real-time option to provide superior performance for edge IoT innovations across varied power ranges — at 15W/28W/45W TDP.
The module provides support for PCIe 4.0 and DDR5 memory with up to 4800 MT/s, 4 display or USB4/TBT4, and features integrated Intel Iris Xe graphics with up to 96EUs, allowing for instantaneous on-device AI performance.
Equipped with Intel TCC (Time-Coordinated Computing) and TSN (Time Sensitive Networking) support, the Express-RLP ensures timely execution of deterministic, hard real-time workloads with ultra-low latency, making it well suited for mission-critical AIoT use cases, including industrial automation, AMR (Autonomous Mobile Robot), autonomous driving, medical imaging, video broadcasting, and more.
Express-BD7
COM Express Basic Size Type 7 Module with Up to 16 cores Intel Xeon D and Pentium D SoC
The Express-BD7 is a COM Express COM.0 R3.0 Basic Size Type 7 module supporting the 64-bit Intel Xeon processor D and Intel Pentium D processor system-on-chip (SoC) (formerly «Broadwell-DE»). The Express-BD7 is specifically designed for customers who need excellent computing performance with balanced power consumption and multiple 10G Ethernet connectivity in a long product life solution.
The Express-BD7 features Intel Virtualization Technology (including VT-x, VT-d, EPT), Intel Hyper-Threading Technology (up to 16 cores, 32 threads), Intel Trusted Execution Technology, Intel AES-NI Technology, and DDR4 ECC (or non-ECC) dual-channel memory at 1866/2133/2400 MHz (dependent on SoC SKU) to provide excellent overall performance.
An integrated Intel 10G Ethernet controller supports two 10GBASE-KR interfaces, relevant sideband signals and NC-SI. The Express-BD7 is designed to serve customers with optimized computing capability per watt and high speed connectivity requirements who want to outsource the custom core logic of their systems for reduced development time.
The Express-BD7 has dual stacked SODIMM sockets supporting up to 32 GB of DDR4 ECC (or non-ECC) memory. Input/output features include 16 PCIe Gen3 lanes, up to 8 PCIe Gen2 lanes, a single onboard Gigabit Ethernet port, USB 3.0/2.0 ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS with CMOS backup, supporting embedded features such as remote console, hardware monitor, and watchdog timer.
