MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
GraphiteVPX/CPU
3U OpenVPX VITA65 Single Board Computer
Connect Tech’s GraphiteVPX/CPU is a VITA 65 compliant 3U single board computer based on the Intel® Atom™ E3845 (Bay Trail) Quad Core processor.
The GraphiteVPX/CPU is a modular design allowing for other Intel processor options to be used; should an alternative processer be required for your application.
TrailBlazer
Single Board Computer
Connect Tech’s TrailBlazer/SBC is a rugged single board computer offering locking pin header connectors and has been specifically designed for the Intel Bay Trail series CPU. TrailBlazer is available with a Quad Core E3845, Dual Core E3825 or Single Core E3815.
Excellent for low power application needing a wide power input. With Mini-PCIe/mSATA/External SATA switching, Dual Gigabit Ethernet, and multiple display formats the TrailBlazer/SBC offers a full featured, flexible small form factor solution.
ArcticEdge
Single Board Computer
Connect Tech’s ArcticEdge/iMX6 will twist your ARM beyond the average development board. ArcticEdge’s low-power, high performance design and extended temperature range make it a practical choice for taking your application from the developer’s desk into the field.
The i.MX6Q 800MHz Cortex-A9 processor gives the reliability needed for long life critical applications.
BlueStorm/SP
Serial communications board
Connect Tech’s standard profile BlueStorm/SP is the ideal choice for your PCI applications. Fully PCI 2.3 compliant, the BlueStorm/SP can be installed in any 3.3V or 5V system.
Available with eight ports, the BlueStorm/SP offers RS-232/422/485 connectivity and is jumper selectable on each individual port.
Dependability, high speed data transfer rates and multi-strike surge suppression make these cards ideal for many environments including; industrial or office automation, POS, scientific or instrumentation applications, to name a few.
All BlueStorm/SP products are FCC certified and CE marked.
FreeForm/PCI-104
FPGA development board
FreeForm/PCI-104 is a reconfigurable FPGA development board with high speed digital I/O that combines a user programmable FPGA with a 32-Bit, 33MHz PCI‑104 interface. The advantages of PCI-104’s high bandwidth along with the versatile FPGA architecture allows users to create a high speed data interface and control solution that is uniquely suited to each individual application.
Based on the Xilinx Virtex-5 FPGA, Connect Tech’s FreeForm/PCI-104 is highly versatile and provides a powerful platform for system development. Ideal for real-time data acquisition, high performance signal processing, avionics, autonomous vehicles and software defined radio, FreeForm/PCI-104 is perfect for embedded systems designs when used along with an embedded host processor.
Use Connect Tech’s engineering services for FPGA and high speed digital I/O design and software/driver development.
Xtreme/104-Plus Opto
PC/104-Plus Serial Expansion Card
Connect Tech’s robust Xtreme/104-Plus product family has introduced optical isolation as an additional feature to its product offering. Xtreme/104-Plus Opto provides the added protection of 3kV optical isolation on a rugged and compact form factor for your critical applications.
PCI 2.3 and PC/104 2.0 compliant, this PC/104-Plus card includes a PC/104 pass-through connector for compatibility with legacy PC/104 cards.
Dependability, high speed data transfer rates and 3kV of optical isolation protection make these cards ideal in environments where harsh conditions may disrupt communications.
Use Xtreme/104-Plus Opto for embedded systems in the military, aerospace, medical and industrial sectors.
PCI to CompactPCI Adapter
Passive extender card
This passive extender card allows developers to install a CompactPCI card into a standard Universal 3.3V or 5V PCI system, avoiding the need for a dedicated CompactPCI system for development work.
The design also includes a reset button, for convenient push-button resetting of the test card without resetting the host computer. This feature is extremely useful when debugging hardware interactions requiring a hardware «clean slate». (This is a hardware reset only. It does not restore the PCI configuration space.)
NOTE: Ensure the cPCI card under test supports the bus voltage used by the adapter’s PCI host system. Consult your system documentation to determine the voltage on your PCI connector.
Standard Usage
Insert the adapter into the desired slot in your host system. Connect the test cPCI card into the connector.
ISA to PC/104 Adapter
Passive extender card
This passive extender card allows developers to install an 8 or 16-bit PC/104 card into a standard ISA bus PC system, avoiding the need for a dedicated PC/104 stack for development work.
The adapter is equipped with a stack-through connector so the test card can be installed on either side enabling probing on the front or the back.
The design also includes a reset button, for convenient push-button resetting of the test card without resetting the host computer. This feature is extremely useful when debugging hardware interactions requiring a hardware «clean slate».
Standard Usage
Simply stack the test PC/104 card onto the adapter’s PC/104 connectors and insert the adapter into the host system’s ISA slot. No additional configuration is required.
Important Note:
Only one PC/104 card can be used per adapter card.
PC/104-Plus to Mini PCI Adapter
PC/104-Plus - Mini PCI Adapter
This adapter allows users to install a Mini PCI card, such as an IEEE 802.11 wireless LAN card, into a standard 3.3 or 5V PC/104-Plus stack.
Equipped with a passive PC/104 stack-through connector, the card can be installed in a PC/104-Plus stack without interfering with the signals of PC/104 cards located above or below.
The adapter includes a 3.3V regulator for use in 5V-only systems.
Standard Usage and ID Selection
Simply insert the Mini PCI card into socket on the card and insert into the host system’s PC/104-Plus stack. Each card within the stack must have a unique ID ranging from zero to three. You will be required to set a pair of jumpers to specify where your card is located within the stack. (Ensure that no two boards share an ID number.)
The jumpers remain unpopulated for an ID of zero. Populate the left jumper for an ID of one, right jumper for an ID of two, and populate both for an ID of three.
No additional configuration is required.
Xtreme/PSU-XP
PC/104 form factor power supply
Connect Tech’s Xtreme/PSU-XP is a high efficiency, high powered PC/104 form factor power supply with extended temperature capabilities. Xtreme/PSU-XP provides power to terminal block connectors and powers all of the PC/104 family expansion buses such as PC/104, PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104.
Xtreme/PSU-XP is a highly reliable power supply which provides 154W of total output power with +3.3V, +5V, +12V, −12V and +5V-Standby output voltages. It can be used as a stand-alone power supply to power any other embedded system, or used directly to power any PC/104 stack or single board computer (SBC).
The Xtreme/PSU-XP has a wide input voltage range that accepts +6V to +36V DC and is specifically designed for use in a broad range of rugged applications including military, industrial, and air and ground vehicles.
Xtreme/PSU-XP can be used in combination with Connect Tech’s stackable CPU and expansion boards for a total design solution.
