MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
BlueStorm/Express
PCI Express x1 Lane serial card
BlueStorm/Express provides reliable, high speed data transfer for PCI Express systems.
These x1 lane PCI Express serial cards offer 2, 4, 8 or 16 ports of RS-232/422/485 connectivity and are compatible with any PCI Express slot. Bidirectional data speeds up to 1.8432 Mbps (RS-422/485) ensure fast communications for your industrial and embedded applications.
BlueStorm/Express supports three RS-422/485 modes: full duplex (four wire) with RTS/CTS flow control, half duplex (two wire) with auto TxD echo cancellation and multi-drop (four wire) communications.
All Connect Tech PCI Express products are FCC certified and CE marked.
ComSync/104
Multi-protocol serial adapter for the PC/104 bus
This two-channel, multi-protocol serial adapter for the PC/104 bus offers reliable, synchronous or asynchronous serial communications for your most demanding applications. The ComSync/104 offers the flexibility of choosing from multiple electrical interfaces, protocols and encoding schemes to ensure your hardware/software solution is ideally suited to your situation.
Register Bit Cloning and programmable security options add convenience to the full list of ComSync/104 features. The extended temperature model ensures your communications will continue under less‑than‑desirable circumstances.
Xtreme/104 Isolated
PC/104 Serial Expansion Card
This high density adapter offers 12 asynchronous serial ports while maintaining full compliance with PC/104 form factor standards. It features eight jumper selectable RS‑232/422/485 ports with support for full duplex, half duplex and multi-drop, as well as four RS-232 dedicated ports.
To ensure maximum performance for your PC/104 based applications, industrial temperature range and 1.4kV RMS electrical isolation has been incorporated on each port of this board’s design. iCoupler® isolation technology enables high data rates, high port density and low power consumption, making it the superior choice for electrical isolation.
Xtreme/104 Isolated is an industrial strength solution ideal for control and automation applications requiring communications over short or long distances using PC/104 bus compatible computers.
Xtreme/104 Opto
PC/104 Serial Expansion Card
Compact yet powerful, the Xtreme/104 Opto PC/104 serial card performs where others fail. Durable and stackable, Xtreme/104 Opto’s small PC/104 form factor makes it the ideal serial communications link in today’s demanding embedded systems.
Xtreme/104 Opto offers 3 kV optical isolation on all signals and ports to ensure smooth, error-free transmission of data even in the noisiest environments. With the added feature of industrial temperature range operation, this PC/104 serial card is well suited to any embedded computer system that is exposed to harsh conditions.
Based on the 16C2850 UART with 128 byte transmit and receive FIFO buffers, Xtreme/104 Opto provides rapid data communications for your military, aerospace, medical, transportation and industrial automation applications.
Xtreme/104 RS-232
PC/104 Serial Expansion Card
A PC/104 serial card designed with speed, flexibility and economy in mind, the Xtreme/104 RS-232 is ideal for environments requiring reliable connections, low power consumption, and a compact form-factor. Available in 4 or 8 port densities, each port is capable of rapid data transfer rates up to 230.4 Kbps. Each jumper selectable port is controlled by a high performance quad UART, ensuring smooth communications and minimal data loss.
Xtreme/104
Serial card
High performance and versatility are trademarks of the Xtreme/104. An ideal serial card choice for your embedded applications, the Xtreme is available with 4 or 8 high speed asynchronous RS-232 or RS-422/485 ports, cabling options, and support for various operating systems.
Quad UARTs provide each port with large data buffering capabilities, and each port can be configured for electrical interface, baud rate, parity, data and stop bits independently. The Xtreme/104 is the perfect combination of flexibility, high performance and cost-effectiveness.
CANpro/104-Plus Opto
PC/104-Plus CAN Controller
Connect Tech’s CANpro/104-Plus Opto offers two powerful NXP SJA1000 CAN controllers and 3kV optical isolation to provide maximum protection for your industrial control applications.
An extension of Connect Tech’s current CAN controller product line, CANpro/104-Plus Opto is based on a PC/104-Plus bus. The design frees up valuable I/O space offering you greater flexibility within your embedded system. For even more I/O, CANpro/104-Plus Opto includes an 8-bit GPIO header.
Dependability, high data rates, network control capabilities and 3kV optical isolation protection make CANpro/104-Plus Opto the ideal choice for industrial control applications that are exposed to harsh conditions or environments.
Xtreme/104-Plus
PC/104-Plus Serial Card
High performance and versatility are trademarks of the Xtreme/104 PC/104 serial card family. Now the Xtreme/104-Plus offers more choice for your embedded applications requiring a small footprint, but fast data transfer rates. The Xtreme/104-Plus is available with 4 or 8 high speed asynchronous RS-232/422/485 ports, 8 selectable RS-232/422/485/TTL ports, or choose 2 or 4 dedicated RS-423 ports.
High performance UARTs provide each port with large data buffering capabilities, and each port on the switchable models can be configured for electrical interface, baud rate, parity, data and stop bits independently. The Xtreme/104-Plus is the perfect combination of flexibility, high performance and cost-effectiveness.
CANpro/104 Opto
PC/104 CAN Controller
Connect Tech CANpro/104 Opto combines the power of two NXP SJA1000 CAN controllers with the compact size and rugged stability of PC/104.
This CAN controller card features fail-safe power-up/power-down and on-board high input impendence transceivers to maximize nodes on the bus. Jumperable slew rate limiting reduces radiated emissions. 3kV of optical and power isolation ensure your data is protected from disruptions that can occur with exposure to harsh conditions or environments.
Dependability, high data rates and network control capabilities make CANpro/104 Opto ideal for industrial control applications.
All Connect Tech PC/104 CAN Controller cards include lifetime warranty and free technical support.
PCI to PC/104-Plus Adapter
Passive extender card
This passive extender card allows developers to mount a PCI-104 or PC/104-Plus card into a Universal PCI bus system. The adapter is equipped with a stack-through connector so the test card can be installed on either side (model ADG001), enabling probing on the front or the back. The design also allows cables to exit from the host PC for easy connection to external devices.
