Tough Computers for Tough Challenges!
Favorites
D-sub 9 pin 120 Ohm termination adapter
D-sub 9 pin 120 Ohm termination adapter CAN adaptor Kvaser D-sub 9 pin 120 Ohm termination adapter is a CAN adaptor with a 9-pin male D-Sub connector at one end and a 9-pin female D-Sub socket at the other. Between CAN High (pin 7) and CAN Low (pin 2) there is a built-in 120 Ohm CAN terminating resistor. This adapter provides quick and easy termination to any Kvaser high-speed CAN product. The Kvaser CAN termination adapter is used when there is a need to terminate a CAN node without internal termination or when no CAN node is connected to the bus. The Kvaser D-sub 9 pin 120 Ohm termination adapter has a 9-pin male D-Sub plug connector and a 9-pin female D-Sub socket. A 120 ohm terminating resistor sits between pins 2 and 7. T-Cannector v2
T-Cannector v2 CAN bus hub Kvaser T-cannector v2 is a CAN bus hub with three female and one male D-SUB9 connectors. Used typically in application development scenarios, this offers an adjustable CAN termination resistor (120/60/0 Ohm) that provides an affordable and safe way of terminating the CAN circuit, as well as powering devices that take their power from the USB connection or the CAN network to which they are attached, such as Kvaser’s Blackbird and Memorator series. This device comes with a 12V power supply and EU, USA, UK and Chinese plugs. Major Features of Kvaser T-cannector v2: Acts as a CAN bus hub with 3 female and 1 male D-SUB9 connectors Each DSUB9 has screws to secure the connection to the Kvaser CAN interface Adjustable termination via easy-to-use switch 12V 1A power supply LED to indicate power on Voltage range of 12V-24V DC This is a new version of an existing product that responds to user requests for more termination options. Notably our previous product came in two versions: with fixed termination of 120 Ohms and without. The Kvaser T-cannector v2 is extremely price-competitive, providing an external 12V 1A power source for Kvaser CAN interfaces and a safe, trustworthy means of circuit termination that protects customer’s interface investment and will prevent short circuits from damaging their development boards.
USBcan Light 4xHS
USBcan Light 4xHS USB-CAN interface with 4 high speed CAN buses The USBcan Light 4xHS is a compact, reliable and cost‑effective means of connecting four high speed CAN buses to a PC or mobile computer. With galvanic isolation as standard, this USB to quad channel CAN interface has a standard USB connector at one end and four high speed CAN channels in a single 26-pin HD D-SUB CAN connector at the other. The supplied HD26-4xDS9 splitter can be used to connect to four separate 9pin DSUB connectors. USBcan Pro 2xHS v2
USBcan Pro 2xHS v2 USB-CAN interface with CAN FD support The USBcan Pro 2xHS v2 is a USB to dual channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors, it is high-performance, yet compact, and can be used as a simple dual-channel interface to connect two high speed CAN buses to a PC or mobile computer, or can be programmed to do more. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device. Feature List: Supports CAN FD Quick and easy plug-and-play installation Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers Power is taken from the USB bus Galvanic isolation High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet Kvaser MagiSync provides automatic time synchronization between several PC-to-bus interfaces connected to the same PC Programming functionality to support interface mode e.g. Optimize protocol handling, pre-filter CAN messages directly on the interface, or simulate missing hardware Simultaneous operation of multiple devices Software: Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads Units are shipped with Kvaser TRX, a lightweight development environment Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available RP1210A Application Programming Interface available On-line documentation in Windows HTML-Help and Adobe Acrobat format
Leaf Light HS v2 OBDII
Leaf Light HS v2 OBDII USB-CAN interface The Leaf Light v2 OBDII provides a simple way of connecting a PC with a vehicle’s on-board computer by means of USB 2.0 connector and a 16-pin OBDII-compliant CAN connector. Having made its name as the work-horse of USB to CAN interfaces, Kvaser’s Leaf Light product series provides reliable, low cost tools for connecting any CAN network to a PC or mobile computer in vehicle diagnostic applications and beyond. BlackBird v2
BlackBird v2 Wireless USB/CAN PC interface Yet more powerful and versatile a WLAN solution than Kvaser’s original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip that gives it up to 75% better range. In addition, more onboard memory overcomes potential interruptions to the wireless connection due to the protocol itself or disturbance. The BlackBird v2’s ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks, or for monitoring a CANbus while in motion. Based on radio chip that is Wi-Fi certified and meets CE and FCC standards, it works in both Ad Hoc and Infrastructure mode. The Blackbird v2’s API is device independent and so can be used on a tablet or smartphone, as well as PC. Major features: - WLAN version 802.11b/g/n - Responds to increased market demand for iOS and Android API with a device independent http based REST API - 100% software compatible with applications written for all Kvaser hardware with free Kvaser CANlib SDK - Up to 75% better range - Works in AdHoc and Infrastructure mode - Lightweight but highly rugged aluminum housing - Polyurethane cabling suitable for extreme environments - Galvanic isolation of the CAN bus driver stage to protect the hardware - Interfaces the CAN bus with a standard D-SUB connector - Configured by USB connection - Can be used as a wired interface - Operating voltage CAN bus (7 — 40 V DC) - Messages are time-stamped and synchronized with a precision of 25 microsecond - Supports 11-bit and 29-bit identifiers - Comes with free, first class technical support
Ethercan Light HS
Ethercan Light HS Ethernet-CAN PC interface The Ethercan Light HS is a fully-equipped interface with a large on-board RAM buffer and full compatibility with J1939, CANopen, NMEA 2000 and DeviceNet. Simple to set up using the standard Kvaser API, in contrast to many of the CAN to Ethernet gateways on the market, this provides a simple, inexpensive one CAN-channel to Ethernet interface for Windows-based PCs. Major features of the Ethercan Light HS: - High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s - Ethernet connection has auto-MDIX, so it automatically detects and adjusts for Ethernet cable being used - Built-in Power over Ethernet (PoE) — receives data and power over the Ethernet cable - Small, lightweight plastic housing with galvanic isolation - Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet 100% compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib USBcan Light 2xHS
USBcan Light 2xHS USB-CAN PC interface The Kvaser USBcan Light 2xHS offers two high speed CAN channels and one USB 2.0 compliant interface. With the three connectors at the end of fully galvanically isolated flexible wires, this device is designed to facilitate any application in which the CAN bus connectors aren’t easily accessible, such as hard to reach electronic control units (ECU) on a vehicle. USBcan Light 2xHS is supplied with CANlib, the software API that is common to all Kvaser hardware. Taking just 30 seconds to programme once you have Canlib downloaded on the host computer, USBcan Light 2xHS is simple to install and configure. Major features of the USBcan Light 2xHS: - One USB 2.0 compliant device provides easy access to two CAN busses - Quick and easy plug-and-play installation. Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers - 100% compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib - High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s. Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet.
Mini PCI Express 2xHS v2
Mini PCI Express 2xHS v2 Dual channel mini PCI Express CAN interface The Kvaser Mini PCI Express 2xHS v2 is a small (30×51mm), yet advanced, real time CAN interface that adds two high speed CAN or CAN FD channels to any standard computer with mini PCI Express capability. PC communication is over the PCI Express system bus, making for extremely low latency with a time stamp accuracy of 1 µs. Major Features Fully compliant to the PCIe bus specification 1.2, Type F2 form factor (Full-Mini with bottom-side keep outs) High-speed CAN connection (compliant with ISO 11898-2), supporting a bit rate from 50 to 1000 kbit/s for Classical CAN and up to 8Mbit/s for CAN FD High transmission rate of up to 20000 messages/s on each channel Time stamp accuracy of 1 µs Galvanic isolation Suitable for industrial environments Low profile mini PCI Express-compliant 7-pin Molex connector provides CAN channel access Includes Molex to DSUB9 cable adapter Complies with EN 61000-6-2:2005, specifying EMC immunity for industrial environments Operates over the industrial temperature range of −40 to +85°C Kvaser’s free of charge CANLIB SDK can be used to develop software for the Mini PCI Express HS board. Windows DLL library and examples included. Supports Windows Vista or later Linux drivers and a dedicated SDK are available as a separate download Support for SocketCAN, see elinux.org for details Note: Kvaser’s already-existing Kvaser Mini PCI Express HS and Kvaser Mini PCI Express 2xHS products will remain available for sale. The primary difference is that these previous versions utilize the USB system bus for communication with the PC. Software Documentation, Kvaser CANlib SDK and drivers can be downloaded for free at www.kvaser.com/downloads Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Visual Basic, Python and t Script All Kvaser CAN interface boards share the common software API, CANLib SDK. Programs written for one interface type will run without modifications on the other interface types. J2534 Application Programming Interface available RP1210A Application Programming Interface available HTML-Help and online documentation in Windows and Linux USBcan Pro 2xHS v2 CB
USBcan Pro 2xHS v2 CB Dual channel USB-CAN interface with CAN FD support The USBcan Pro 2xHS v2 CB is a bare circuit board version of Kvaser’s USBcan Pro 2xHS v2 dual channel CAN or CAN FD interface with scripting capability. The USBcan Pro 2xHS v2 CB is supplied ’bare board’ i.e. without a housing, and can thus be built into any system. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device. Feature List Supports CAN FD Quick and easy plug-and-play installation Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers Power derived from the USB connection, CAN or an in-built power supply Galvanic isolation High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet Kvaser MagiSync provides automatic time synchronization between several PC-to-bus interfaces connected to the same PC Programming functionality to support interface mode e.g. Optimize protocol handling, pre-filter CAN messages directly on the interface, or simulate missing hardware Simultaneous operation of multiple devices Software Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads Units are shipped with Kvaser TRX, a lightweight development environment Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available RP1210A Application Programming Interface available On-line documentation in Windows HTML-Help and Adobe Acrobat format
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters