MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
T-Cannector v2
CAN bus hub
Kvaser T-cannector v2 is a CAN bus hub with three female and one male D-SUB9 connectors. Used typically in application development scenarios, this offers an adjustable CAN termination resistor (120/60/0 Ohm) that provides an affordable and safe way of terminating the CAN circuit, as well as powering devices that take their power from the USB connection or the CAN network to which they are attached, such as Kvaser’s Blackbird and Memorator series. This device comes with a 12V power supply and EU, USA, UK and Chinese plugs.
Major Features of Kvaser T-cannector v2:
Acts as a CAN bus hub with 3 female and 1 male D-SUB9 connectors
Each DSUB9 has screws to secure the connection to the Kvaser CAN interface
Adjustable termination via easy-to-use switch
12V 1A power supply
LED to indicate power on
Voltage range of 12V-24V DC
This is a new version of an existing product that responds to user requests for more termination options. Notably our previous product came in two versions: with fixed termination of 120 Ohms and without. The Kvaser T-cannector v2 is extremely price-competitive, providing an external 12V 1A power source for Kvaser CAN interfaces and a safe, trustworthy means of circuit termination that protects customer’s interface investment and will prevent short circuits from damaging their development boards.
USBcan Light 4xHS
USB-CAN interface with 4 high speed CAN buses
The USBcan Light 4xHS is a compact, reliable and cost‑effective means of connecting four high speed CAN buses to a PC or mobile computer. With galvanic isolation as standard, this USB to quad channel CAN interface has a standard USB connector at one end and four high speed CAN channels in a single 26-pin HD D-SUB CAN connector at the other. The supplied HD26-4xDS9 splitter can be used to connect to four separate 9pin DSUB connectors.
USBcan Pro 2xHS v2
USB-CAN interface with CAN FD support
The USBcan Pro 2xHS v2 is a USB to dual channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors, it is high-performance, yet compact, and can be used as a simple dual-channel interface to connect two high speed CAN buses to a PC or mobile computer, or can be programmed to do more. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device.
Feature List:
Supports CAN FD
Quick and easy plug-and-play installation
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
Power is taken from the USB bus
Galvanic isolation
High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s
Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet
Kvaser MagiSync provides automatic time synchronization between several PC-to-bus interfaces connected to the same PC
Programming functionality to support interface mode e.g. Optimize protocol handling, pre-filter CAN messages directly on the interface, or simulate missing hardware
Simultaneous operation of multiple devices
Software:
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads
Units are shipped with Kvaser TRX, a lightweight development environment
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available
RP1210A Application Programming Interface available
On-line documentation in Windows HTML-Help and Adobe Acrobat format
Leaf Light HS v2 OBDII
USB-CAN interface
The Leaf Light v2 OBDII provides a simple way of connecting a PC with a vehicle’s on-board computer by means of USB 2.0 connector and a 16-pin OBDII-compliant CAN connector. Having made its name as the work-horse of USB to CAN interfaces, Kvaser’s Leaf Light product series provides reliable, low cost tools for connecting any CAN network to a PC or mobile computer in vehicle diagnostic applications and beyond.
BlackBird v2
Wireless USB/CAN PC interface
Yet more powerful and versatile a WLAN solution than Kvaser’s original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip that gives it up to 75% better range. In addition, more onboard memory overcomes potential interruptions to the wireless connection due to the protocol itself or disturbance.
The BlackBird v2’s ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks, or for monitoring a CANbus while in motion. Based on radio chip that is Wi-Fi certified and meets CE and FCC standards, it works in both Ad Hoc and Infrastructure mode. The Blackbird v2’s API is device independent and so can be used on a tablet or smartphone, as well as PC.
Major features:
- WLAN version 802.11b/g/n
- Responds to increased market demand for iOS and Android API with a device independent http based REST API
- 100% software compatible with applications written for all Kvaser hardware with free Kvaser CANlib SDK
- Up to 75% better range
- Works in AdHoc and Infrastructure mode
- Lightweight but highly rugged aluminum housing
- Polyurethane cabling suitable for extreme environments
- Galvanic isolation of the CAN bus driver stage to protect the hardware
- Interfaces the CAN bus with a standard D-SUB connector
- Configured by USB connection
- Can be used as a wired interface
- Operating voltage CAN bus (7 — 40 V DC)
- Messages are time-stamped and synchronized with a precision of 25 microsecond
- Supports 11-bit and 29-bit identifiers
- Comes with free, first class technical support
Ethercan Light HS
Ethernet-CAN PC interface
The Ethercan Light HS is a fully-equipped interface with a large on-board RAM buffer and full compatibility with J1939, CANopen, NMEA 2000 and DeviceNet. Simple to set up using the standard Kvaser API, in contrast to many of the CAN to Ethernet gateways on the market, this provides a simple, inexpensive one CAN-channel to Ethernet interface for Windows-based PCs.
Major features of the Ethercan Light HS:
- High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s
- Ethernet connection has auto-MDIX, so it automatically detects and adjusts for Ethernet cable being used
- Built-in Power over Ethernet (PoE) — receives data and power over the Ethernet cable
- Small, lightweight plastic housing with galvanic isolation
- Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet 100% compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib
USBcan Light 2xHS
USB-CAN PC interface
The Kvaser USBcan Light 2xHS offers two high speed CAN channels and one USB 2.0 compliant interface. With the three connectors at the end of fully galvanically isolated flexible wires, this device is designed to facilitate any application in which the CAN bus connectors aren’t easily accessible, such as hard to reach electronic control units (ECU) on a vehicle.
USBcan Light 2xHS is supplied with CANlib, the software API that is common to all Kvaser hardware. Taking just 30 seconds to programme once you have Canlib downloaded on the host computer, USBcan Light 2xHS is simple to install and configure.
Major features of the USBcan Light 2xHS:
- One USB 2.0 compliant device provides easy access to two CAN busses
- Quick and easy plug-and-play installation. Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
- 100% compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib
- High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s. Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet.
Mini PCI Express 2xHS v2
Dual channel mini PCI Express CAN interface
The Kvaser Mini PCI Express 2xHS v2 is a small (30×51mm), yet advanced, real time CAN interface that adds two high speed CAN or CAN FD channels to any standard computer with mini PCI Express capability. PC communication is over the PCI Express system bus, making for extremely low latency with a time stamp accuracy of 1 µs.
Major Features
Fully compliant to the PCIe bus specification 1.2, Type F2 form factor (Full-Mini with bottom-side keep outs)
High-speed CAN connection (compliant with ISO 11898-2), supporting a bit rate from 50 to 1000 kbit/s for Classical CAN and up to 8Mbit/s for CAN FD
High transmission rate of up to 20000 messages/s on each channel
Time stamp accuracy of 1 µs
Galvanic isolation
Suitable for industrial environments
Low profile mini PCI Express-compliant 7-pin Molex connector provides CAN channel access
Includes Molex to DSUB9 cable adapter
Complies with EN 61000-6-2:2005, specifying EMC immunity for industrial environments
Operates over the industrial temperature range of −40 to +85°C
Kvaser’s free of charge CANLIB SDK can be used to develop software for the Mini PCI Express HS board. Windows DLL library and examples included.
Supports Windows Vista or later
Linux drivers and a dedicated SDK are available as a separate download
Support for SocketCAN, see elinux.org for details
Note: Kvaser’s already-existing Kvaser Mini PCI Express HS and Kvaser Mini PCI Express 2xHS products will remain available for sale. The primary difference is that these previous versions utilize the USB system bus for communication with the PC.
Software
Documentation, Kvaser CANlib SDK and drivers can be downloaded for free at www.kvaser.com/downloads
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Visual Basic, Python and t Script
All Kvaser CAN interface boards share the common software API, CANLib SDK. Programs written for one interface type will run without modifications on the other interface types.
J2534 Application Programming Interface available
RP1210A Application Programming Interface available
HTML-Help and online documentation in Windows and Linux
USBcan Pro 2xHS v2 CB
Dual channel USB-CAN interface with CAN FD support
The USBcan Pro 2xHS v2 CB is a bare circuit board version of Kvaser’s USBcan Pro 2xHS v2 dual channel CAN or CAN FD interface with scripting capability. The USBcan Pro 2xHS v2 CB is supplied ’bare board’ i.e. without a housing, and can thus be built into any system. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device.
Feature List
Supports CAN FD
Quick and easy plug-and-play installation
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
Power derived from the USB connection, CAN or an in-built power supply
Galvanic isolation
High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s
Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet
Kvaser MagiSync provides automatic time synchronization between several PC-to-bus interfaces connected to the same PC
Programming functionality to support interface mode e.g. Optimize protocol handling, pre-filter CAN messages directly on the interface, or simulate missing hardware
Simultaneous operation of multiple devices
Software
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads
Units are shipped with Kvaser TRX, a lightweight development environment
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available
RP1210A Application Programming Interface available
On-line documentation in Windows HTML-Help and Adobe Acrobat format
Memorator Pro 2xHS v2 CB
Professional-level, dual channel CAN bus interface and standalone data logger
Kvaser Memorator Pro 2xHS v2 CB is a professional-level, dual channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation.
Configurable using Kvaser’s Memorator Config Tool, this device is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 CB is CAN FD compliant.
Major Features:
Monitor two CAN channels simultaneously using just one device
Log data to an expandable SD card slot
Supports CAN FD up to 8Mbit/s (with proper physical layer implementation)
Script functionality allows users to develop customised t-script applications written in the Kvaser t programming language
Power derived from the USB connection, CAN or an in-built power supply
Supports silent mode for analysis tools — listens to the bus without interfering
Detection and generation of error frames and remote frames
LED lights alert user to device status, including signalling a full SD card or card error
Galvanically isolated CAN bus drivers
Automatically time synchronises the data transmitted and received across both buses
Built-in Kvaser MagiSync™ technology time synchronises with other Kvaser interfaces connected to the same PC, resulting in simpler and more accurate multichannel data capture
Extended operating temperature range from −40 to 85 °C
NOTE: Product ships with Commercial Grade SD card (-25 to +85°C). Industrial Grade SD cards (-40 to +85°C) are available for additional purchase. Contact us for details
Compatible with J1939, CANopen, NMEA 2000® and DeviceNet
Plug and play installation, and a comprehensive user guide to help make t script development quick and easy
Software
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Java, Python and Visual Basic
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available
RP1210A Application Programming Interface available
On-line documentation in Windows HTML-Help and Adobe Acrobat format
